Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Wurth Elektronik 744825433 is a UL-approved data line filter with 2 functions, rated voltage of 250V, and inductance of 33000uH. It operates b/w -40 to 125 °C and has a max DC resistance of 0.21 ohm. Ideal for applications requiring noise suppression in data lines with a current rating of 3A.
Median Price
$6.622
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Farnell
1+ parts
$5.430
100+ parts
$4.520
1k+ parts
-
10k+ parts
Bürklin Elektronik
$6.160
$4.720
$4.100
Chip1Stop
$6.270
$3.310
Element14
$6.974
$5.111
Mouser Electronics
$7.160
$5.080
$5.040
Distrelec
$7.461
Newark
$8.050
$5.970
$5.930
Verical
$6.000
Nova Conductors
$4.410
Vyrian
VNN
LIBRA Elektronik GmbH
Martec Srl
EMSNET
Aztec Data Supply Inc.
$1.080
Corohmni
$3.484
Argo Parts USA
Ampacity Inc.
$4.870
Continental Prestige Electronics
$6.650
$3.900
AZTECH Wire
$9.914
Assy Fe
Netroflash
$4.322
$4.190
$4.101
Perfect Parts
Having UL approval ensures that the product meets high safety standards, making it a reliable choice for data line filtering applications.
With two functions, this data line filter offers double the protection and efficiency compared to filters with only one function.
With a rated voltage of 250 V, this filter is suitable for a wide range of applications and can handle varying voltage levels effectively.
Having 12 terminals enables easy and secure connection of multiple data lines, ensuring stable filtering performance.
Being specifically designed as a data line filter, this product offers superior filtering capabilities for data communication components, reducing interference and improving signal quality.
With a high maximum operating temperature of 125°C, this filter can withstand heavy use and extreme conditions without compromising performance.
The low minimum operating temperature of -40°C ensures that this filter remains functional even in cold environments, making it versatile for various applications.
A high inductance of 33000 microhenries helps in effectively filtering out unwanted noise and signals from data lines, ensuring clean and reliable data transmission.
The compact width of 18.6 mm allows for easy installation in cramped spaces or on crowded circuit boards, making this filter suitable for compact electronic devices.
With a low maximum DC resistance of 0.21 ohms, this filter minimizes power loss and heat generation, ensuring efficient operation and prolonging the lifespan of connected devices.
The length of 30 mm provides a good balance between compactness and flexibility, making this filter suitable for a wide range of installation scenarios.
The through-hole mounting type simplifies installation and ensures secure attachment, making it easy for users to integrate this filter into their electronic systems with confidence.
These compact dimensions make this filter versatile and compatible with different devices and systems, offering flexibility in integration and use.
With a rated current of 3 amps, this filter can handle moderate to high current levels, making it suitable for various data line filtering applications that demand reliable current handling capabilities.
The height of 35 mm provides sufficient space for secure mounting and airflow, ensuring optimal performance of this filter without overheating or interference issues.
Data Line Filters 744825433 attributes and parameters. Explore more Data Line Filters devices from Wurth Elektronik
Approvals (V):
Maximum DC Resistance:
Filter Type:
Height:
Inductance:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
744825433 Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
1N4148WS
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS303C
Idec
ROTARY SWITCH;
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
2N2222A
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
Synsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Promax-johnton
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
International Semiconductor
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
BAV99W-7-F
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
1N4148
Central Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ECA2DHG4R7
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
7427932
Wuerth Elektronik & Kg
Wurth Elektronik 7427932 is a chip data line filter with 2 terminals, Ferrite Bead type, and 125°C max operating temp. Ideal for IEC-approved applications requiring filtering at frequencies b/w 25-100 MHz with low DC resistance of 0.0009 ohm. Suitable for surface mount installation in compact spaces due to its dimensions of L7.8xB4.75xH3.0 mm.
BLM21PG600SN1
Murata Manufacturing
Murata Manufacturing's BLM21PG600SN1 is a FERRITE CHIP data line filter with dimensions 2x1.25x0.85mm, rated current of 3A, and output impedance of 60 ohm. It operates b/w -55 to 125°C, has a max DC resistance of 0.025 ohm, and is designed for surface mount applications in electronic devices.
744229
Wurth Elektronik 744229 is a UL-approved data line filter with 2 functions, rated at 80V and inductance of 6.5uH. It operates b/w -40 to 125°C, has a max DC resistance of 0.95 ohm, and output impedance of 18400 ohm. This surface mount filter is ideal for applications requiring noise suppression in data lines.
74270053
The Wurth Elektronik 74270053 is a data line filter with a ferrite bead filter type. It has a max operating temperature of 125°C and min operating temperature of -25°C. With dimensions of D16.0XH28.5 (mm), it is suitable for stud mount applications and has an output impedance of 258 ohms.
LI0805H121R-10
Steward
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .15 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .8 A;
MPZ1608S600ATAH0
TDK
TDK's MPZ1608S600ATAH0 is a 0603 chip bead data line filter with FERRITE CHIP technology. It offers a max operating temperature of 125°C, DC resistance of 0.02 ohm, and output impedance of 60 OHM. Ideal for applications requiring noise suppression in circuits up to 100 MHz frequency range.
BLM15PX601SN1D
Murata Manufacturing's BLM15PX601SN1D is a FERRITE CHIP data line filter with 0.5mm width, 1mm length, and 0.5mm height. It has a max DC resistance of 0.23 ohm and an output impedance of 600 ohm, suitable for surface mount applications in electronics to manage interference on data lines.
BKP2125HS221-TV
Taiyo Yuden
Taiyo Yuden's BKP2125HS221-TV is a FERRITE CHIP filter with 2 terminals, rated for 2A current. With dimensions of L2.0XB1.25XH0.85 (mm), it offers an output impedance of 220 ohm and max DC resistance of 0.05 ohm. Ideal for data line filtering applications, this surface mount device operates b/w -55 to 85 °C temperatures effectively.
IP4256CZ5-W,115
Nexperia
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Rated Voltage: 5.6 V; Length: 1.7 mm; No. of Functions: 1; Approvals (V): IEC;
BLM31PG121SN1B
Murata's BLM31PG121SN1B is a chip bead filter with 2 terminals, rated for 3A current. With dimensions of L3.2xB1.6xH1.1mm, it operates b/w -55 to 125°C and offers an output impedance of 120Ω at frequencies ranging from 100MHz to DC. Ideal for data line filtering applications due to its ferrite construction and surface mounting type.
BLM21AG471SN1D
BLM21AG471SN1D by Murata Manufacturing is a chip bead data line filter with 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This ferrite chip filter has dimensions of L2.0XB1.25XH0.85 (mm) and is commonly used for surface mount applications in electronic devices.
74279273
Wurth Elektronik 74279273 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, with dimensions of L1.0XB0.5XH0.5 (mm). Featuring a max frequency of 600 MHz and rated current of 2A, it offers an output impedance of 20 OHM.
CM1422-03CP
California Micro Devices
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Output Impedance (ohm): 50 OHM; Manufacturer Series: CM1422; Capacitance: 15 uF; Dimensions: L4.045XB1.503XH0.714 (mm)/L0.159XB0.059XH0.028 (inch);
BLM18PG121SN1J
Murata Manufacturing's BLM18PG121SN1J is a chip bead data line filter with 2 terminals, dimensions of 1.6x0.8x0.8mm, and output impedance of 120Ω. It operates b/w -55°C to 125°C, has a DC resistance of 0.05 ohm, and is suitable for surface mount applications in filtering frequencies from 100 MHz with a rated current of 2A.
BLM15PD121SN1D
BLM15PD121SN1D by Murata is a chip bead data line filter with 2 terminals, 0402 case code, and ferrite chip construction. It operates b/w -55°C to 125°C, has a DC resistance of 0.09 ohm, and output impedance of 120 ohm. Ideal for surface mount applications in filtering data lines up to 100 MHz frequency range.
8108-RC
Bourns
The Bourns 8108-RC Data Line Filter features 2 functions, 4 terminals, and inductance of 1000 uH. With UL approval, it operates b/w -55°C to 105°C. Ideal for applications requiring a max DC resistance of 0.01 ohm and rated current of 10 A.
FBMJ3216HS800-T8
Taiyo Yuden's FBMJ3216HS800-T8 is a Ferrite Chip Data Line Filter with 2 terminals, rated for 4A current. It offers an output impedance of 80 ohms, operates b/w -40°C to 125°C, and has a compact size of 3.2mm x 1.6mm x 1.1mm. Ideal for surface mount applications requiring effective noise suppression in data lines.
51-750-309
Api Technologies
51-750-309 by Api Technologies is a Data Line Filter with 70V rated voltage and 10A rated current. With a max insertion loss of 65dB, it is ideal for panel mount applications requiring high capacitance at 12000uF. Its compact size of 4.95mm diameter and 26.62mm height make it suitable for various electronic devices.
BL02RN2R1M2B
Murata Manufacturing's BL02RN2R1M2B is a Ferrite Bead Data Line Filter with 7A rated current, -40 to 85°C operating temp range, and Through Hole Mount. Ideal for noise suppression in electronic circuits.
MPZ2012S300AT000
TDK's MPZ2012S300AT000 is a chip bead data line filter with 2 terminals. It operates b/w -55°C to 125°C, offering a max DC resistance of 0.01 ohm and output impedance of 30 ohm at 100 MHz. Ideal for surface mount applications in electronics requiring noise suppression and signal filtering.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
7448262013
Wurth Elektronik
Wurth Elektronik 7448262013 Data Line Filter has UL approval, rated voltage of 250V, and inductance of 1300uH. With dimensions L43.5xB23.5xH43.0 (mm), it is ideal for applications requiring a max operating temperature of 125°C and min of -40°C, rated current up to 20A.
744822301
Wurth Elektronik 744822301 is a UL-approved data line filter with 2 functions, rated voltage of 250V, and inductance of 1000uH. It operates b/w -40°C to 125°C, has a max DC resistance of 0.035 ohm, and rated current of 3A. Ideal for applications requiring noise suppression in data lines.
744822222
Wurth Elektronik 744822222 is a UL-approved data line filter with 2 functions, rated voltage of 250V, and inductance of 2200uH. It operates b/w -40 to 125 °C and has a max DC resistance of 0.07 ohm. Ideal for applications requiring noise suppression in data lines.
7448225007
7448225007 by Wurth Elektronik is a data line filter with a rated voltage of 250V and a max operating temperature of 125°C. It has 2 functions, 4 terminals, and an inductance of 700uH. This panel mount filter is UL approved and commonly used for filtering data lines in electronic applications.
7448261418
DATA LINE FILTER; Maximum DC Resistance: .0079 ohm; Rated Current: 14 A; Inductance: 1800 uH; Dimensions: L43.0XB23.5XH43.0 (mm)/L1.693XB0.925XH1.693 (inch); Approvals (V): UL;
7448263505
7448263505 by Wurth Elektronik is a data line filter with a rated voltage of 250V and a max operating temperature of 125°C. It has two functions and an inductance of 500uH, making it suitable for applications requiring high current filtering and protection against electromagnetic interference.
744822120
The Wurth Elektronik 744822120 Data Line Filter has a rated voltage of 250V, inductance of 20000uH, and max operating temperature of 125°C. It is UL approved with 2 functions and suitable for applications requiring noise suppression in data lines.
744822233
DATA LINE FILTER; Maximum DC Resistance: .12 ohm; Rated Current: 1.5 A; Mounting Type: THROUGH HOLE MOUNT; No. of Functions: 2; Inductance: 3300 uH;
7448229004
7448229004 by Wurth Elektronik is a data line filter with a rated voltage of 250V and a max operating temperature of 125°C. It has two functions and an inductance of 350uH, making it suitable for applications requiring noise suppression in data lines.
744823220
DATA LINE FILTER; Maximum DC Resistance: .27 ohm; Rated Current: 1.5 A; No. of Terminals: 4; Mounting Type: THROUGH HOLE MOUNT; Inductance: 20000 uH;
744824101
DATA LINE FILTER; Maximum DC Resistance: .007 ohm; Rated Current: 10 A; Terminal Finish: TIN COPPER; Inductance: 1000 uH; Length: 27.5 mm;
744821120
DATA LINE FILTER; Maximum DC Resistance: 1 ohm; Rated Current: .5 A; Width (mm): 7.5; Maximum Operating Temperature: 125 Cel; Approvals (V): UL;
744823305
Wurth Elektronik 744823305 is a UL-approved data line filter with 2 functions, rated voltage of 250V, and inductance of 5000uH. It operates b/w -40 to 125 °C and has dimensions of L23.0XB17.0XH28.0 (mm). Ideal for applications requiring noise suppression in data lines at a max current of 2.5A.
7448262510
DATA LINE FILTER; Maximum DC Resistance: .0036 ohm; Rated Current: 25 A; Maximum Operating Temperature: 125 Cel; Height: 43 mm; Minimum Operating Temperature: -40 Cel;
744823333
DATA LINE FILTER; Maximum DC Resistance: .06 ohm; Rated Current: 2.5 A; Width (mm): 13.0; Maximum Operating Temperature: 125 Cel; Inductance: 3300 uH;
744825320
DATA LINE FILTER; Maximum DC Resistance: .16 ohm; Rated Current: 3 A; Dimensions: L30.0XB18.6XH35.0 (mm)/L1.181XB0.732XH1.378 (inch); No. of Functions: 2; Inductance: 20000 uH;
744842311
The Wurth Elektronik 744842311 is a data line filter with a rated voltage of 250V and a max operating temperature of 125°C. It has two functions and four terminals, making it suitable for applications requiring noise filtering in data lines.
744821150
DATA LINE FILTER; Maximum DC Resistance: .2 ohm; Rated Current: 1 A; Width (mm): 7.5; Inductance: 5000 uH; JESD-609 Code: e2;
744823210
Wuerth Elektronik & Kg 744823210 is a UL-approved data line filter with 2 functions, rated voltage of 250V, and inductance of 10000uH. It operates b/w -40 to 125 °C and has dimensions of L23.0xB13.0xH28.0 (mm). Ideal for applications requiring noise suppression in data lines at a max current of 2A.
7448256033
DATA LINE FILTER; Maximum DC Resistance: .025 ohm; Rated Current: 6 A; Width (mm): 21.0; Height: 35 mm; Approvals (V): UL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved