Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Wurth Elektronik 7448022010 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 2A rated current. It has approvals from ENEC-10 and VDE, operating temperature range of -40 to 125 °C. Ideal for applications requiring EMI mains filtering at 50Hz frequency, it is compact with dimensions of 14mm x 18mm x 22mm for through hole mounting in various electronic devices.
Median Price
$9.540
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$8.260
100+ parts
$5.050
1k+ parts
$4.720
10k+ parts
$4.570
Bürklin Elektronik
$8.730
$5.240
-
Farnell
$6.478
$5.719
Element14
$9.910
$5.940
$5.704
Newark
$10.670
$7.070
$6.650
$6.500
Verical
Nova Conductors
$5.630
Vyrian
VNN
AZTECH Wire
$1.110
$1.070
$1.040
$1.020
Ampacity Inc.
$7.020
Continental Prestige Electronics
$8.090
$4.330
Having ENEC-10 and VDE approvals ensures the reliability and safety of the product, making it a good choice for use in various applications.
The high rated voltage of 250V allows this EMI mains filter to be used in a wide range of voltage applications, making it versatile and adaptable.
Being a single phase EMI filter helps in reducing electromagnetic interference, ensuring better performance for connected devices and equipment, making it an efficient choice.
The wide operating temperature range of -40 to 125°C enables this EMI mains filter to operate effectively in varying environmental conditions, enhancing its durability and reliability.
The compact width of 14mm makes this EMI mains filter space-saving and suitable for applications where size constraints are a concern.
With an operating frequency of 50Hz, this EMI mains filter is compatible with standard power frequencies, ensuring seamless integration into existing electrical systems.
The through hole mounting type makes installation convenient and secure, contributing to the ease of use and reliability of this product.
With a rated current of 2A, this EMI mains filter can handle moderate power loads, making it suitable for a wide range of applications where filtering of electrical noise is required.
The height of 22mm strikes a balance between compactness and functionality, making this EMI mains filter a practical choice for various installation scenarios.
EMI Mains Filters 7448022010 attributes and parameters. Explore more EMI Mains Filters devices from Wurth Elektronik
Approvals (V):
Filter Type:
Height:
Length:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Rated Current:
Rated Voltage:
Width (mm):
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
2N2222A
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
1N4148
New Jersey Semiconductor Products
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Jinan Jingheng Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
BAV99
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDLL4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
Bytesonic Electronics
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
FDN306P
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
Shandong Yiguang Electronic Joint Stock
Temic Semiconductors
RN112-0.5-02-27M
Schaffner Holding Ag
The Schaffner Holding Ag RN112-0.5-02-27M is a UL, IEC, VDE, ENEC-10 approved single-phase EMI mains filter with a rated voltage of 300V and operating temperatures from -40°C to 100°C. Its dimensions are L17.7xB17.1xH12.6 mm, making it suitable for through-hole mounting applications in various electronic devices requiring effective EMI filtering at 50/60Hz frequencies up to 0.5A current rating.
ESP-03-221-D
Cosel
The Cosel ESP-03-221-D is a UL, CSA, VDE, ENEC-10 approved single-phase EMI filter with 250V rated voltage and 3A rated current. With a max operating temperature of 85°C and high pot of 2500V, it's ideal for DIN rail mounting in applications requiring efficient EMI mains filtering.
810912010112
Wuerth Elektronik & Kg
810912010112 by Wurth Elektronik is a SINGLE PHASE EMI FILTER with a rated voltage of 250V and rated current of 10A. It has approvals from CSA, ENEC-10, IEC, UL, VDE and operates at temperatures ranging from -25°C to 100°C. Ideal for PANEL MOUNT applications requiring effective EMI mains filtering in various electronic systems.
SSRH7H-M06237
KEMET Corporation
SSRH7H-M06237 by KEMET Corp is a UL approved EMI mains filter with 250V rated voltage and 0.6A current. Featuring single-phase filter type, it operates b/w -25°C to 120°C. Ideal for applications requiring high insulation resistance of 100 Mohm, such as industrial electronics and power supplies.
CMS1-11-R
Cooper Electronic Technologies
SINGLE PHASE EMI FILTER; Rated Current: 1.35 A; Width (mm): 7.2; Dimensions: L9.4XB7.2XH2.6 (mm); Maximum Operating Temperature: 160 Cel; Additional Features: INDUCTANCE 100 MICRO HENRY;
SHBC24W-2R1A0311V
SINGLE PHASE EMI FILTER;
SC-05-10J
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 5 A; Width (mm): 20.0; No. of Terminals: 4; Height: 27 mm; Rated Voltage: 250 V;
30AYT6C
Corcom
THREE PHASE EMI FILTER; Maximum Frequency: 10 MHz; Rated Current: 30 A; Approvals (V): UL; CSA; VDE; Dimensions: L351XB141.5XH65 (mm)/L13.82XB5.57XH2.56 (inch); Rated Voltage: 250 V;
16BCF10R
TE Connectivity
TE Connectivity's 16BCF10R EMI Mains Filter is a single-phase filter with UL, CSA, EN approvals and rated voltage of 277V. With a max operating temperature of 40°C and rated current of 16A, it is ideal for panel mount applications to reduce electromagnetic interference in electrical systems at frequencies of 50/60Hz.
SSR21NV-M18164
SINGLE PHASE EMI FILTER; Rated Current: 1.8 A; Height: 27 mm; High Pot: 500 V; Minimum Insulation Resistance: 100 Mohm; Rated Voltage: 250 V;
SC-10-30J
KEMET Corporation's SC-10-30J is a UL approved EMI mains filter with 100 Mohm min insulation resistance, 250V rated voltage, and 10A rated current. It operates b/w -25°C to 105°C, ideal for single-phase EMI filtering applications requiring through-hole mounting in compact spaces.
250APH12P
The TE Connectivity 250APH12P is a UL-approved EMI mains filter with a rated voltage of 690V and rated current of 250A. This three-phase filter operates at temperatures from -10°C to 50°C, with high pot up to 2640V and max leakage current of 330mA. Ideal for panel mounting applications, it measures 160mm in width, 250mm in length, and stands at a height of 125mm.
SS26V-070510
SS26V-070510 by KEMET Corporation is a single-phase EMI filter with a rated voltage of 250 V. It has a min insulation resistance of 100 Mohm and can operate in temperatures ranging from -25 to 120 °C. This filter is commonly used for EMI mains filtering applications.
RTEN-5010D
TDK
The TDK RTEN-5010D is a 3-phase EMI filter with a rated voltage of 500V and current of 10A. It offers high insulation resistance of 100 Mohm, approvals from UL and EN, and operates b/w -25°C to 85°C. Ideal for panel mounting applications requiring effective mains filtering at a frequency of 60Hz.
LF-202A
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Minimum Insulation Resistance: 300 Mohm; Width (mm): 32.0; Maximum Leakage Current: 1 mA; Dimensions: L64.0XB32.0XH25.0 (mm)/L2.52XB1.26XH0.984 (inch);
PLA10AN1522R0R2B
Murata Manufacturing
Murata Manufacturing's PLA10AN1522R0R2B is a SINGLE PHASE EMI FILTER with 100 Mohm Min Insulation Resistance, 300 V Rated Voltage, and 120 °C Max Operating Temp. It is used for EMI mains filtering applications requiring 2 A Rated Current in through-hole mounting setups.
1-6609036-6
TE Connectivity's 1-6609036-6 EMI Mains Filter is a single-phase filter with a rated voltage of 250V and rated current of 40A. It operates b/w -10°C to 40°C, with max leakage current of 0.75mA. Ideal for panel mounting applications requiring effective electromagnetic interference suppression.
FIL-1S-1-10A-230AC-PT
Phoenix Contact
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Approvals (V): IEC; UL; VDE; Length: 99.5 mm; Rated Voltage: 230 V; Width (mm): 45;
SS11VL-06180
SINGLE PHASE EMI FILTER; Rated Current: .6 A; Mounting Type: THROUGH HOLE MOUNT; Operating Frequency (Hz): 50Hz; Minimum Insulation Resistance: 100 Mohm; Additional Features: INDUCTANCE 18 MILLIHENRY;
7448051804
Wurth Elektronik 7448051804 is a single-phase EMI filter with a rated voltage of 250V and current of 18A. It operates b/w -40°C to 125°C, suitable for ENEC-10; VDE approvals. Ideal for applications requiring effective mains filtering in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
7448031501
Wurth Elektronik
SINGLE PHASE EMI FILTER; Rated Current: 15 A; Approvals (V): ENEC-10; VDE; Operating Frequency (Hz): 50Hz; Packing Method: TRAY; Mounting Type: THROUGH HOLE MOUNT;
7448227005
Wurth Elektronik 7448227005 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 6.5A rated current. It operates b/w -40 to 125 °C, suitable for EMI mains filtering applications due to its compact L18.5XB14.5XH22.0 mm size and through-hole mounting type.
74482210002
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Additional Features: INDUCTANCE 0.175 MILLI HENRY; Dimensions: L18.5XB14.5XH22.0 (mm)/L0.728XB0.571XH0.866 (inch); Height: 22 mm; Mounting Type: THROUGH HOLE MOUNT;
744844221
Wurth Elektronik 744844221 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 12A current. It operates b/w -40°C to 125°C, ideal for EMI mains filtering applications. Compact at L28.0xB18.5xH33.0 (mm), it offers through-hole mounting for easy installation in various systems.
7448030509
SINGLE PHASE EMI FILTER; Rated Current: 5 A; Dimensions: L22.0XB13.5XH25.0 (mm)/L0.866XB0.531XH0.984 (inch); Maximum Operating Temperature: 125 Cel; Height: 25 mm; Rated Voltage: 250 V;
7448031002
Wurth Elektronik 7448031002 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 10A current. It operates b/w -40°C to 125°C, ideal for ENEC-10; VDE approved applications requiring EMI mains filtering.
7448030417
SINGLE PHASE EMI FILTER; Rated Current: 4 A; Width (mm): 13.5; Minimum Operating Temperature: -40 Cel; Approvals (V): ENEC-10; VDE; Operating Frequency (Hz): 50Hz;
7448680120
SINGLE PHASE EMI FILTER; Rated Current: 12 A; Operating Frequency (Hz): 50Hz; Mounting Type: THROUGH HOLE MOUNT; Length: 27.5 mm; Rated Voltage: 250 V;
7448051012
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Height: 33 mm; Rated Voltage: 250 V; Packing Method: CARTON; Width (mm): 23;
7448030333
SINGLE PHASE EMI FILTER; Rated Current: 2.5 A; Maximum Operating Temperature: 125 Cel; Length: 22 mm; Rated Voltage: 250 V; Mounting Type: THROUGH HOLE MOUNT;
7448027001
SINGLE PHASE EMI FILTER; Rated Current: 7 A; Mounting Type: THROUGH HOLE MOUNT; Length: 18 mm; Width (mm): 14.0; Height: 22 mm;
744834433
Wurth Elektronik 744834433 is a single-phase EMI mains filter with 4 terminals, rated voltage of 250V, and operating temperature range from -40°C to 125°C. It has a width of 28.0mm, length of 32.5mm, and height of 22mm. Ideal for applications requiring noise suppression in electrical systems at frequencies up to 50Hz with a rated current of 5A.
7448040707
SINGLE PHASE EMI FILTER; Rated Current: 7 A; Height: 28 mm; Maximum Operating Temperature: 125 Cel; Dimensions: L28.0XB19.0XH28.0 (mm)/L1.102XB0.748XH1.102 (inch); Terminal Finish: TIN COPPER;
7448041104
SINGLE PHASE EMI FILTER; Rated Current: 11 A; Length: 28 mm; JESD-609 Code: e2; Terminal Finish: TIN COPPER; Approvals (V): ENEC-10; VDE;
7448680100
SINGLE PHASE EMI FILTER; Rated Current: 9.5 A; Minimum Operating Temperature: -40 Cel; Width (mm): 25; Mounting Type: THROUGH HOLE MOUNT; Height: 9.7 mm;
7448063801
Wuerth Elektronik & Kg 7448063801 is a single-phase EMI mains filter with 250V rated voltage and 38A rated current. It has approvals from ENEC-10 and VDE, operates b/w -40°C to 125°C, and is suitable for applications requiring effective electromagnetic interference suppression in through-hole mounting setups.
7448014501
SINGLE PHASE EMI FILTER; Rated Current: 4.5 A; Mounting Type: THROUGH HOLE MOUNT; Length: 15 mm; Height: 16 mm; Maximum Operating Temperature: 125 Cel;
7448042001
SINGLE PHASE EMI FILTER; Rated Current: 20 A; Mounting Type: THROUGH HOLE MOUNT; Height: 28 mm; Length: 30 mm; Packing Method: CARTON;
744839010400
THREE PHASE EMI FILTER; Rated Current: 40 A; Maximum Operating Temperature: 125 Cel; Operating Frequency (Hz): 50Hz; Approvals (V): IEC; Packing Method: TRAY;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved