Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
156120GS82500P by Wurth Elektronik is a SINGLE COLOR LED with peak wavelength of 520nm and max forward current of 0.02A. Ideal for applications requiring GREEN light emission, it has a water clear lens type, surface mounting feature, and operates b/w -40 to 85°C.
Median Price
$0.690
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Element14
1+ parts
$0.568
100+ parts
$0.430
1k+ parts
-
10k+ parts
DigiKey
$0.405
$0.370
Mouser Electronics
$0.700
$0.334
Newark
$0.721
$0.417
$0.381
Farnell
$0.267
$0.262
VNN
Vyrian
Nova Conductors
Ampacity Inc.
$0.227
Continental Prestige Electronics
$0.551
$0.321
$0.287
$0.268
Bastille Electronics
Single configuration makes the LED easy to install and use in various applications.
The low maximum forward current ensures energy efficiency and prevents overheating.
The peak wavelength of 520 nm indicates a bright green light emission, ideal for visibility purposes.
Water clear lens ensures maximum light output and brightness.
Single color LED provides consistent green light output without color mixing.
Even with low luminous intensity, this LED can still provide sufficient brightness for certain applications.
Green color LED is suitable for various signaling and indicator applications.
Surface mount feature allows for easy and secure installation on PCBs.
Visible LEDs 156120GS82500P attributes and parameters. Explore more Visible LEDs devices from Wurth Elektronik
Color:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
Lens Type:
Minimum Luminous Intensity:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Maximum Reverse Voltage:
Shape:
Terminal Pitch:
Viewing Angle:
156120GS82500P Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
BAV99
Nexperia
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WT
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
LM7805CT
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
LM358N
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
1N4148
Rochester Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
Sangdest Microelectronics (Nanjing)
TLUV5300
The Vishay Intertechnology TLUV5300 is a 5mm dual-color LED with common cathode configuration. It has a max forward current of 0.03A and peak wavelengths of 630nm/565nm, suitable for applications requiring red/green light emission. With a viewing angle of 60° and nominal luminous intensity of 2.5mcd, it is ideal for bulk mounting in optoelectronic designs.
AP3216CGCK
Kingbright Electronic
AP3216CGCK by Kingbright Electronic is a 2mm SINGLE COLOR LED with peak wavelength of 574nm. It has a max forward current of 0.03A and viewing angle of 120°. Ideal for applications requiring GREEN light emission in surface mount configurations.
KP-2012SYC
KP-2012SYC by Kingbright Electronic is a 1.3mm WATER CLEAR LED with a peak wavelength of 590nm and max forward current of 0.03A. Ideal for applications requiring SUPER BRIGHT YELLOW illumination, this SINGLE COLOR LED has a viewing angle of 120° and nominal luminous intensity of 150.0mcd.
LGA67K-G2K1-24-Z
Osram Opto Semiconductors
Osram Opto Semiconductors' LGA67K-G2K1-24-Z is a single color LED with a peak wavelength of 572nm and a max forward current of 0.02A. It has a round shape, measures 2.4mm in size, and is suitable for surface mount applications requiring a green light source with a viewing angle of 120°.
LTL-4231N-022
Lite-on Technology
LTL-4231N-022 by Lite-on Technology is a 3mm green LED with a peak wavelength of 565nm and max forward current of 0.03A. Ideal for applications requiring a single color LED with diffused lens, such as indicator lights in electronic devices. Operating temperature range from -55 to 100°C makes it versatile for various environments.
XHP50B-00-0000-0D0UH20E3
Cree Led
SINGLE COLOR LED;
NTE3145
Nte Electronics
LSA676-P2S1-1
Osram Opto Semiconductors' LSA676-P2S1-1 is a 2.4mm SINGLE COLOR LED with peak wavelength of 645nm and viewing angle of 120°. Ideal for surface mount applications, it has a max forward current of 0.03A and nominal luminous intensity of 140.0mcd, making it suitable for various lighting solutions.
LRTBGVTG-U5V5-1+A5B5-29+S9T9-49
Osram Opto Semiconductors' LRTBGVTG-U5V5-1+A5B5-29+S9T9-49 is a 2.5mm TRIPLE COLOR LED with peak wavelengths of 632/523/465nm, suitable for visible applications. It has a max forward current of 40A, diffused lens type, and nominal luminous intensities of 875.0/2200.0/440.0mcd for RED/TRUE GREEN/BLUE colors, making it ideal for surface mount configurations with a viewing angle of 120° at temperatures ranging from -40 to 110 °C.
SML-210MTT86
ROHM
ROHM's SML-210MTT86 is a 1.4mm single color LED with max forward current of 0.025A and max forward voltage of 2.2V. Ideal for surface mount applications, it emits yellowish green light at a wavelength of 565nm, making it suitable for indicator lights in various electronic devices.
LST676-P2S1-1-Z
Osram Opto Semiconductors' LST676-P2S1-1-Z is a 2.4mm single color LED with peak wavelength of 645nm and max forward current of 0.03A. Ideal for applications requiring super red light emission, such as indicator lights in automotive or electronic devices.
SML-P24MUWT86R
ROHM's SML-P24MUWT86R is a 1mm DUAL COLOR LED with MILKY WHITE lens. It has max forward current of 0.02A, operating temp range -40 to 85°C. Ideal for applications requiring compact surface mount LEDs with red/yellowish green colors and nominal luminous intensity of 52.0/21.0 mcd.
XHP35B-00-0000-0D0HC20E8
XHP35B-00-0000-0D0UB227G
HSMF-C118
Broadcom
HSMF-C118 by Broadcom is a 2.7mm COMMON ANODE TRIPLE COLOR LED with peak wavelengths of 637nm, 523nm, and 468nm. It has a max forward current of 0.02A and viewing angle of 125°. Ideal for applications requiring diffused lighting such as signage, displays, and indicators due to its red/green/blue color output.
CLV1A-FKB-CK1VW1DE1BB7C3C3
Wolfspeed
CLV1A-FKB-CK1VW1DE1BB7C3C3 by Wolfspeed is a triple color LED with a common anode configuration. It has a max forward current of 0.025 A and can operate at temperatures ranging from -40 to 85 °C. This LED is commonly used in surface mount applications for its red, green, and blue color capabilities.
150080GS75000
Wuerth Elektronik & Kg
150080GS75000 by Wurth Elektronik is a 1.4mm SINGLE COLOR LED with peak wavelength of 515nm, suitable for visible applications. It has a max forward current of 0.03A and viewing angle of 140°, making it ideal for surface mount installations in various electronic devices. Operating temperature ranges from -40°C to 85°C, offering versatility in different environments.
CMD6722SRUGCTR8
Chicago Miniature Lighting
DUAL COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 40.0/25.0; Lens Type: CLEAR; Configuration: SEPARATE, 2 ELEMENTS;
LTST-C191KGKT-5A
LTST-C191KGKT-5A by Lite-on Technology is a 1.1mm GREEN SINGLE COLOR LED with a peak wavelength of 574nm and a viewing angle of 130°. It is ideal for surface mount applications requiring a max forward current of 0.03A and an operating temperature range from -55 to 85 °C.
Visual Communications Company
CMD6722SRUGCTR8 by Visual Communications Company is a 2.4mm dual color LED with separate configuration and clear lens. It has a max forward current of 0.03A and peak wavelengths of 660nm (red) and 565nm (green). This surface mount LED is suitable for applications requiring a round shape, such as indicator lights or displays.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
156125RS75000
Wurth Elektronik
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 110.0; Lens Type: WATER CLEAR; No. of Functions: 1;
156125YS75000
156125YS75000 LED by Wurth Elektronik is a single color yellow LED with a peak wavelength of 591nm and max forward current of 0.02A. Ideal for surface mount applications, it has a viewing angle of 140° and nominal luminous intensity of 70.0mcd, making it suitable for various lighting projects.
156125VS75000
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 45.0; Lens Type: WATER CLEAR; Maximum Reverse Voltage: 5 V;
156125BS75000
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 120.0; Lens Type: WATER CLEAR; Height: .82 mm;
156120M173000
TRIPLE COLOR LED;
156125RV73000P
DUAL COLOR LED;
156120RS75000
156125M173000
156125RV73000
DUAL COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 110.0/170.0; Lens Type: WATER CLEAR; Maximum Operating Temperature: 85 Cel;
156120SS82500
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 900.0; Lens Type: WATER CLEAR; Minimum Luminous Intensity: .36 cd;
156120AS82500
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2200.0; Lens Type: WATER CLEAR; Height: 1.55 mm;
156120RS82500P
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1100.0; Lens Type: WATER CLEAR; Maximum Reverse Voltage: 5 V;
156125RG73000P
DUAL COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 180.0/285.0; Lens Type: WATER CLEAR; Viewing Angle: 120 deg;
156120GS75300
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 235.0; Lens Type: WATER CLEAR; Minimum Operating Temperature: -40 Cel;
156120RS82500
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1100.0; Lens Type: WATER CLEAR; Minimum Operating Temperature: -40 Cel;
156125RG73000
156125RG73000 by Wurth Elektronik is a dual-color LED with separate, 2-element configuration. It has a size of 1.2mm and peak wavelengths of 632nm/520nm. Ideal for applications requiring red/green color indication with a viewing angle of 120° and max forward current of 0.02A.
156125VS57000
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 40.0; Lens Type: DIFFUSED; Minimum Operating Temperature: -40 Cel;
156125YV73000
156125YV73000 by Wurth Elektronik is a dual color LED with peak wavelengths of 592nm and 573nm. It has a viewing angle of 120° and nominal luminous intensities of 70mcd and 50mcd for yellow and bright green colors respectively. This surface mount LED is ideal for applications requiring separate, two-element configurations in compact spaces.
156120GS75000
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 235.0; Lens Type: WATER CLEAR; Maximum Forward Current: .025 A;
156120GS82500
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1500.0; Lens Type: WATER CLEAR; Minimum Luminous Intensity: .715 cd;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved