Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
156125VS75000 by Wurth Elektronik is a 1.2mm SINGLE COLOR LED with peak wavelength of 575nm, max forward current of 0.02A, and bright green color. Ideal for surface mount applications in electronics, offering a viewing angle of 140° and nominal luminous intensity of 45.0mcd.
Median Price
$0.384
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Bürklin Elektronik
1+ parts
$0.345
100+ parts
$0.307
1k+ parts
$0.259
10k+ parts
-
Mouser Electronics
$0.420
$0.331
$0.279
$0.263
DigiKey
Element14
$0.601
$0.475
$0.431
Farnell
$0.285
RS (Exports)
$0.349
$0.328
Nova Conductors
$0.305
Vyrian
VNN
Semicontronic
$0.293
$0.286
$0.284
Aranea Global
$0.299
$0.287
Argo Parts USA
$0.296
Advanced Electronics
$0.311
Corohmni
$0.579
Ampacity Inc.
$0.640
Aztec Data Supply Inc.
$0.690
Continental Prestige Electronics
$0.268
$0.226
$0.205
Single configuration makes it easy to use and integrate into various electronic devices.
Compact size allows for flexibility in placement and design of the product.
Low forward current consumption helps in energy efficiency and extends the product's lifespan.
Peak wavelength of 575 nm provides a bright green color output, enhancing visibility.
Water clear lens ensures maximum light transmission and brightness for the LED.
Single color LED simplifies usage and provides consistent lighting in one color.
Having only 2 terminals makes it easier to connect and reduces complexity in circuit design.
High maximum operating temperature allows for reliable performance in various environments.
Low profile height enables applications where space is limited.
Square shape provides a uniform and wider light distribution compared to other shapes.
Low minimum operating temperature ensures functionality even in cold conditions.
Even the minimum luminous intensity is sufficient for visibility, ensuring consistent brightness.
Bright green color is attractive and easily noticeable, suitable for various applications.
Tray packing method simplifies handling and storage of the LEDs, ensuring they remain intact during transportation.
High maximum reverse voltage provides protection against reverse polarity and voltage spikes.
Optimal terminal pitch allows for easy mounting and soldering on circuit boards.
Wide viewing angle of 140° ensures good visibility from different angles.
High nominal luminous intensity of 45.0 mcd ensures a bright output for the LED.
Surface mount feature simplifies installation and makes it suitable for automated manufacturing processes.
Low forward voltage ensures efficient power consumption and less heat generation during operation.
Visible LEDs 156125VS75000 attributes and parameters. Explore more Visible LEDs devices from Wurth Elektronik
Color:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
Lens Type:
Minimum Luminous Intensity:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Maximum Reverse Voltage:
Shape:
Size:
Terminal Pitch:
Viewing Angle:
156125VS75000 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
BAV99
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
NC7WZ07P6X
Onsemi
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
DS18B20U
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
1N4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
Lite-on Semiconductor
ULN2803A
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
World Products
Daco Semiconductor
Zowie Technology
LGR971
Infineon Technologies
LGR971 by Infineon Technologies is a 1.3mm SINGLE COLOR LED with peak wavelength of 570nm, emitting GREEN light. It has a max forward current of 0.025A and operates b/w -30°C to 95°C. Ideal for applications requiring diffused green light with a wide viewing angle of 160°.
SML-210MTT86
ROHM
ROHM's SML-210MTT86 is a 1.4mm single color LED with max forward current of 0.025A and max forward voltage of 2.2V. Ideal for surface mount applications, it emits yellowish green light at a wavelength of 565nm, making it suitable for indicator lights in various electronic devices.
LGR971-LM
Osram Opto Semiconductors
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 19.6; Lens Type: COLORLESS DIFFUSED; Terminal Finish: Tin (Sn);
HLMP3301
Cml Technologies & Kg
HLMP3301 by Cml Technologies & Kg is a 5mm SINGLE COLOR LED with peak wavelength of 635nm. It has a max forward current of 0.03A and operates b/w -55 to 100°C. Ideal for applications requiring high efficiency red light emission, such as indicator lights in electronic devices.
LTST-C193TGKT-5A
Lite-on Technology
LTST-C193TGKT-5A by Lite-on Technology is a single color LED with peak wavelength of 525nm. It has a max forward current of 0.02A and viewing angle of 130°. Ideal for surface mount applications, it emits green light with luminous intensity of 154.0mcd.
553-0112-200F
Dialight
Dialight's 553-0112-200F is a dual color LED array with separate, 2-element configuration. Featuring peak wavelengths of 635nm (red) and 565nm (green), it has a size of 3mm and nominal luminous intensities of 10.0/12.6 mcd. Ideal for applications requiring radial mounting, this LED array is suitable for visual indication in various electronic devices.
SML-LX0404SIUPGUSB
Lumex
The Lumex SML-LX0404SIUPGUSB is a 1mm COMMON ANODE TRIPLE COLOR LED with peak wavelengths of 632/518/465nm. It has a max forward current of 0.03A and viewing angle of 120°, making it ideal for applications requiring RGB illumination in compact spaces. With a water clear lens and surface mounting feature, this LED operates b/w -40 to 85°C temperatures.
QS63XXB12
Apem Components
Visible LEDs;
LTST-C170TBKT-5A
LTST-C170TBKT-5A by Lite-on Technology is a 1.4mm BLUE LED with a peak wavelength of 468nm and viewing angle of 130°. Ideal for surface mount applications, it has a max forward current of 0.02A and nominal luminous intensity of 28.1mcd, making it suitable for various lighting projects.
XHP35B-00-0000-0D0HC20E8
Wolfspeed
SINGLE COLOR LED;
SML-P11MTT86
ROHM SML-P11MTT86 is a 0.6mm SINGLE COLOR LED with max. forward current of 0.02A, emitting YELLOW GREEN light at 2.1mcd intensity. Ideal for surface mount applications in electronics due to its small size and color clarity.
SLR-56VR3F
ROHM's SLR-56VR3F is a 5mm single color LED with peak wavelength of 650nm. It has a max forward current of 0.02A and viewing angle of 40°. Ideal for applications requiring red light emission, such as indicator lights in electronic devices.
VLMG1500-GS08
Vishay Intertechnology's VLMG1500-GS08 is a 0.5mm SINGLE COLOR LED with peak wavelength of 611nm. It has max forward current of 0.03A and viewing angle of 130°. Ideal for surface mount applications, it emits YELLOW GREEN light at 90.0mcd luminous intensity.
150080SS75000
Wuerth Elektronik & Kg
150080SS75000 by Wurth Elektronik is a single color LED with peak wavelength of 645nm and viewing angle of 140°. Ideal for applications requiring a compact size, it has a forward current of 0.03A and operates b/w -40°C to 85°C. Suitable for surface mount installations in various electronic devices.
SLR-342VR3F
ROHM's SLR-342VR3F is a 3.1mm single color LED with peak wavelength of 650nm, diffused lens, and red color. It has 2 terminals with tin/silver/copper finish, T-1 code, and radial mount feature. Ideal for applications requiring visible LEDs in compact size like indicator lights or displays.
HSMF-C162
Broadcom
HSMF-C162 by Broadcom is a 1.6mm dual-color LED with peak wavelengths of 637nm and 595nm. With a viewing angle of 120°, it's ideal for surface mount applications requiring amber/orange-red light output. Operating temperatures range from -30 to 85 °C, making it suitable for various electronic devices.
LYR976-PS-36
Osram Opto Semiconductors' LYR976-PS-36 is a single color LED with peak wavelength of 591nm, ideal for amber light applications. With a max forward current of 0.025A and viewing angle of 160°, it offers high luminous intensity at 162.5mcd for surface mount installations.
598-8220-107F
Dialight's 598-8220-107F is a 2mm SINGLE COLOR LED with WATER CLEAR lens. It has a max forward current of 0.025A and viewing angle of 140°. Ideal for surface mount applications, it emits RED ORANGE light with luminous intensity of 150.0 mcd.
LTST-C191TBKT-5A
HLMP-4000#002
Agilent Technologies
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 3; Nominal Luminous Intensity (mcd): 2.1/4.2; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
156125BS75000
Wurth Elektronik
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 120.0; Lens Type: WATER CLEAR; Height: .82 mm;
156125RS75000
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 110.0; Lens Type: WATER CLEAR; No. of Functions: 1;
156120RS75000
156125YS75000
156125YS75000 LED by Wurth Elektronik is a single color yellow LED with a peak wavelength of 591nm and max forward current of 0.02A. Ideal for surface mount applications, it has a viewing angle of 140° and nominal luminous intensity of 70.0mcd, making it suitable for various lighting projects.
156120M173000
TRIPLE COLOR LED;
156120SS82500
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 900.0; Lens Type: WATER CLEAR; Minimum Luminous Intensity: .36 cd;
156120AS82500
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2200.0; Lens Type: WATER CLEAR; Height: 1.55 mm;
156125M173000
156125RV73000
DUAL COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 110.0/170.0; Lens Type: WATER CLEAR; Maximum Operating Temperature: 85 Cel;
156125RV73000P
DUAL COLOR LED;
156120RS82500P
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1100.0; Lens Type: WATER CLEAR; Maximum Reverse Voltage: 5 V;
156120RS82500
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1100.0; Lens Type: WATER CLEAR; Minimum Operating Temperature: -40 Cel;
156125RG73000P
DUAL COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 180.0/285.0; Lens Type: WATER CLEAR; Viewing Angle: 120 deg;
156125YV73000
156125YV73000 by Wurth Elektronik is a dual color LED with peak wavelengths of 592nm and 573nm. It has a viewing angle of 120° and nominal luminous intensities of 70mcd and 50mcd for yellow and bright green colors respectively. This surface mount LED is ideal for applications requiring separate, two-element configurations in compact spaces.
156125GS75000
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 450.0; Lens Type: WATER CLEAR; Shape: SQUARE;
156125RS57000
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 110.0; Lens Type: DIFFUSED; Maximum Forward Current: .02 A;
156125RS57099
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 110.0; Lens Type: DIFFUSED; Configuration: SINGLE;
156125VS57000
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 40.0; Lens Type: DIFFUSED; Minimum Operating Temperature: -40 Cel;
156125YS57000
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 70.0; Lens Type: DIFFUSED; Configuration: SINGLE;
156125YS57099
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 100.0; Lens Type: DIFFUSED; Viewing Angle: 160 deg;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved