Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 11.65; Lens Type: DIFFUSED; Terminal Pitch: 2.7 mm;
Median Price
$12.525
Lifecycle Status
Suppliers In-Stock
27
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$23.999
100+ parts
$22.799
1k+ parts
10k+ parts
-
Farnell
$1.051
$0.918
$0.783
Freelance Electronics
$0.059
Nova Conductors
$0.294
Digiode
$1.092
Chip Stock
Goldney Electronics S.L.
Prism Electronics
PC Components Company LLC
Connector Distribution Corp
Right Parts Inc.
Bristol Electronics
Rebound Electronics
Atlantic Semiconductor
ComSIT Distribution GmbH
ComSIT USA
Cogito LLC
Cyclops Electronics Ltd
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
Mil-Aero Solutions, Inc.
Vyrian
Inventory MP
Sensible Micro Corp
Elcom Components
Sunrise Surplus Inc.
NPI Materials, Inc.
Aztec Data Supply Inc.
$0.139
Corohmni
$0.194
Netroflash
$0.279
$0.273
Argo Parts USA
$0.285
Decca Corp
$0.445
$0.436
$0.432
Advanced Electronics
$0.726
$0.661
$0.595
Corphita
$1.035
Continental Prestige Electronics
$0.278
$0.219
Perfect Parts
RC Electronics
$0.270
$0.240
GreenTree Electronics
Infinite Electronics LLP (Excess)
A-Z Elektronik GmbH
Kepictronics
Alle Elektronik GmbH
Authorized Procurement Solutions
Futuretech Components
Supply Digital
Formix International (Excess)
Resion (Excess)
Modulus Dynamics
Visible LEDs HSMH-C150 attributes and parameters. Explore more Visible LEDs devices from Hewlett Packard
Color:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
Lens Type:
Minimum Luminous Intensity:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Maximum Reverse Voltage:
Shape:
Size:
Terminal Pitch:
Viewing Angle:
HSMH-C150 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
PCN Obsolescence/ EOL - DK OBS NOTICE
HP, Inc. engages in the provision of personal computing and other access devices, imaging and printing products, and related technologies, solutions, and services. It operates through the following business segments: Personal Systems, Printing, and Corporate Investments. The Personal Systems segment offers commercial and consumer desktop and notebook personal computers, workstations, thin clients, commercial tablets and mobility devices, retail point-of-sale systems, displays and other related accessories, software, support, and services for the commercial and consumer markets. The Printing segment provides consumer and commercial printer hardware, supplies, solutions and services, and scanning devices. The Corporate Investments segment includes HP Labs and certain business incubation projects. The company was founded by William R. Hewlett and David Packard in 1939 and is headquartered in Palo Alto, CA.
LM358M
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
1N4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
SS14
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
LM358ADR
Texas Instruments
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
1N4148WS
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Semitron
BSS138
Vishay Intertechnology
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
Alpha & Omega Semiconductor
550-0405F
Dialight
Dialight 550-0405F is a 5mm single color LED with peak wavelength of 635nm. It has a max forward current of 0.04A and viewing angle of 60°. Ideal for applications requiring red light emission, such as indicator lights in electronic devices.
LTST-C191TBKT-2A
Visible LEDs;
Q12P1CXXW12E
Apem Components
The Apem Components Q12P1CXXW12E is a 12mm single color LED with diffused lens, emitting white light at 1200.0mcd intensity. Ideal for panel mounting applications, it has a wide 60° viewing angle and operates b/w -40°C to 85°C temperature range.
HSMS-C170
Broadcom
HSMS-C170 by Broadcom is a 1.4mm SINGLE COLOR LED with peak wavelength of 630nm. It has a max forward current of 0.02A and viewing angle of 170°. Ideal for applications requiring high efficiency red or orange light emission in surface mount configurations.
Q62702P5179
Osram Opto Semiconductors
Osram Opto Semiconductors' Q62702P5179 is a 1.3mm SINGLE COLOR LED with peak wavelength of 572nm and max forward current of 0.025A. Ideal for applications requiring green light emission, such as indicator lights in electronic devices due to its colorless diffused lens and surface mounting feature.
HLMP1700
Three-five Systems
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .007 A; Minimum Operating Temperature: -55 Cel; Height: 4.3 mm;
SSL-LX3059IGW-CA
Lumex
SSL-LX3059IGW-CA by Lumex is a 3mm dual color LED with common anode configuration. It has a max forward current of 0.03A and peak wavelengths of 635nm/565nm. Ideal for applications requiring diffused milky white light output, such as indicator lights in electronic devices.
KP-1608SGC
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: WATER CLEAR; Maximum Operating Temperature: 85 Cel;
KP-1608SURC
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 200.0; Lens Type: WATER CLEAR; Minimum Operating Temperature: -40 Cel;
CMD17-21VGD/TR8
Visual Communications Company
CMD17-21VGD/TR8 by Visual Communications Company is a 1.4mm SINGLE COLOR LED with peak wavelength of 570nm and green color. It has a max forward current of 0.03A, viewing angle of 140°, and surface mounting feature. Ideal for applications requiring low luminous intensity in compact spaces.
597-3021-507F
Dialight's 597-3021-507F is a single color LED with peak wavelength of 650nm, forward current of 0.025A, and forward voltage of 2.8V. Ideal for surface mount applications, it emits red light with a viewing angle of 110° and luminous intensity of 6.3mcd.
LTST-C191KFKT
LTST-C191KFKT by Lite-on Technology is a 1.1mm WATER CLEAR LED with peak wavelength of 611nm, emitting ORANGE light. It has a max forward current of 0.03A and viewing angle of 130°, making it ideal for surface mount applications requiring amber illumination in electronic devices.
550-0507F
Dialight's 550-0507F is a 5mm red LED with built-in resistor, operating at -40 to 85°C. It has a peak wavelength of 655nm, forward current of 0.0075A, and forward voltage of 5V. Ideal for applications requiring a single color LED with diffused lens in radial mount configuration.
TLCR5800
Telefunken Microelectronics
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 100 Cel; Color At Wavelength: Orange;
SML-P11MTT86
ROHM SML-P11MTT86 is a 0.6mm SINGLE COLOR LED with max. forward current of 0.02A, emitting YELLOW GREEN light at 2.1mcd intensity. Ideal for surface mount applications in electronics due to its small size and color clarity.
HLMP4740
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Green; Maximum Forward Voltage: 2.2 V; Maximum Forward Current: .007 A;
22-23C/R6GHBHW-C01/2C
Everlight Electronics
Everlight Electronics' 22-23C/R6GHBHW-C01/2C is a 2mm COMMON ANODE TRIPLE COLOR LED with peak wavelengths of 626nm, 518nm, and 468nm. With a viewing angle of 130° and diffused white lens, it's ideal for surface mount applications requiring brilliant red, green, and blue illumination.
LGL29K-G2J1-24-Z
Osram Opto Semiconductors' LGL29K-G2J1-24-Z is a 1.3mm single color LED with peak wavelength of 572nm and max forward current of 0.02A. Ideal for applications requiring green light emission, such as indicator lights in electronic devices. Operating temperature range from -40 to 100°C makes it versatile for various environments.
158563450
Wuerth Elektronik & Kg
SINGLE COLOR LED;
155124VS73200
Wurth Elektronik's 155124VS73200 is a 2mm SINGLE COLOR LED with peak wavelength of 575nm and water clear lens. Ideal for applications requiring bright green light, it has a viewing angle of 120° and operates b/w -40 to 85 °C. Perfect for surface mount installations, it offers a nominal luminous intensity of 50.0 mcd at 0.025A forward current.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HSMH-C190
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 17.0; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
HSMH-C190 by Broadcom is a 1mm single color LED with peak wavelength of 660nm. It has a max forward current of 0.025A and viewing angle of 170°. Ideal for surface mount applications, it offers red light with luminous intensity of 17.0mcd, making it suitable for various lighting and display purposes.
Hewlett Packard
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 11.65; Lens Type: DIFFUSED; Peak Wavelength (nm): 660;
HSMH-C170
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 17; Lens Type: DIFFUSED; Terminal Finish: Gold (Au);
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 17; Lens Type: DIFFUSED; Maximum Forward Current: .025 A;
HSMH-C170 by Broadcom is a single color LED with a peak wavelength of 660nm and a max forward current of 0.025A. It is commonly used in applications such as surface mount visible LED displays and indicators.
HSMH-C150
HSMH-C150 by Broadcom is a 2mm SINGLE COLOR LED with peak wavelength of 660nm. It has max forward current of 0.03A and viewing angle of 170°. Ideal for applications requiring red light emission, such as indicator lights in electronic devices.
HSMH-C191
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 17.0; Lens Type: UNTINTED DIFFUSED; Terminal Finish: GOLD OVER NICKEL;
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 17.0; Lens Type: UNTINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
HSMH-C265
HSMH-C265 by Broadcom is a single color LED with a peak wavelength of 660nm and a max forward current of 0.025A. It is commonly used in applications such as surface mount lighting due to its compact size (1.25mm) and high luminous intensity (17.0mcd).
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 17.0; Lens Type: NONDIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
HSMH-C120
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: UNTINTED NONDIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Nominal Luminous Intensity (mcd): 17.0; Lens Type: CLEAR UNTINTED NONDIFFUSED; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
HSMH-H190
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Configuration: SINGLE; Peak Wavelength (nm): 660; Shape: RECTANGULAR;
HSMH-C110
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Nominal Luminous Intensity (mcd): 19.0; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
HSMH-C110 by Broadcom is a single color LED with peak wavelength of 660nm and max forward current of 0.03A. It is ideal for applications requiring red light emission, with a clear untinted lens and surface mounting feature. Operating temperature ranges from -40 to 85°C, making it suitable for various electronic devices.
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 12.65; Lens Type: DIFFUSED; Height: 1.5 mm;
HSMH-A100-L00J1
Broadcom's HSMH-A100-L00J1 is a 2.2mm ROUND SINGLE COLOR LED with Peak Wavelength of 645nm, Max Forward Current of 0.03A, and Viewing Angle of 120°. Ideal for applications requiring RED light emission in surface mount configurations at temperatures ranging from -55 to 100 °C.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved