Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ROHM SML-P11UTT86RJ is a 0.6mm SINGLE COLOR LED with 2 terminals. It has a max forward current of 0.02A and operates b/w -40 to 85°C. Ideal for surface mount applications requiring a red light source with 3.25mcd luminous intensity.
Median Price
$0.375
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Bristol Electronics
1+ parts
100+ parts
$0.188
1k+ parts
$0.075
10k+ parts
$0.056
Nova Conductors
-
Vyrian
Corohmni
$0.101
Aztec Data Supply Inc.
$0.420
Advanced Electronics
$0.579
$0.550
AZTECH Wire
$5.538
Ampacity Inc.
$6.100
Semicontronic
$20.100
$19.598
$19.497
Continental Prestige Electronics
Argo Parts USA
Bastille Electronics
Single configuration allows for easy installation and replacement, making this LED convenient to use.
Compact size is suitable for applications where space is limited, providing flexibility in design.
Low forward current consumption helps in saving energy and extending the lifespan of the LED.
Colorless transparent lens ensures efficient light transmission, delivering a bright and clear illumination.
Single color LED provides consistent and uniform illumination, ideal for specific lighting requirements.
Having two terminals simplifies the installation process and enhances the reliability of the connection.
High maximum operating temperature allows the LED to function effectively in various environmental conditions.
Low height profile enables easy integration into compact devices or spaces without compromising on performance.
Square shape offers a modern and sleek design aesthetic, suitable for a wide range of applications.
Wide range of operating temperatures ensures the LED can withstand extreme cold conditions without impacting performance.
Gold terminal finish with nickel barrier provides excellent conductivity and corrosion resistance for reliable electrical connections.
Low minimum luminous intensity offers adjustable brightness levels for different lighting requirements.
Red color provides a distinct and vibrant visual indicator, suitable for signaling and decorative lighting applications.
Tray packaging method with 7-inch size ensures convenient storage and handling of the LEDs for production purposes.
High maximum reverse voltage tolerance protects the LED from potential damage due to voltage spikes or reverse polarity.
Close terminal pitch allows for compact and efficient PCB layout designs, saving space and enhancing connectivity.
High nominal luminous intensity ensures a bright and visible light output, making it suitable for various lighting applications.
Surface mounting feature enables easy and secure attachment to PCBs or surfaces, simplifying the installation process.
Low maximum forward voltage requirement helps in reducing power consumption and heat generation, enhancing energy efficiency.
Visible LEDs SML-P11UTT86RJ attributes and parameters. Explore more Visible LEDs devices from ROHM
Color:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
JESD-609 Code:
Lens Type:
Minimum Luminous Intensity:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Maximum Reverse Voltage:
Shape:
Size:
Terminal Finish:
Terminal Pitch:
SML-P11UTT86RJ Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Rohm Co Ltd is a Japan-based company that manufactures and distributes electronic components for use in automotive, transportation, medical, healthcare, audiovisual, telecommunications, digital power, computer and peripherals, and home appliance end markets. Its product portfolio includes integrated circuits in memory, amplifiers, switches, data converters, and microcontrollers; discrete semiconductors, such as transistors and diodes; power devices; passive devices, such as resistors and capacitors; and optoelectronic devices.
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
SMBJ18CA
Dc Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
1N4148
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
BSS138
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
BAV99
Zetex Plc
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
LM317TG
Texas Instruments
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
American Power Devices
LM555CMX
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148W-7-F
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
HLMP-1301-E00A1
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 4.95; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
HLMP1700
Three-five Systems
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .007 A; Minimum Operating Temperature: -55 Cel; Height: 4.3 mm;
SML-LXR44SRC-TR
Lumex
SML-LXR44SRC-TR by Lumex is a 2.4mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring a clear lens SUPER RED light source, such as indicator lights in electronic devices due to its surface mounting feature and 90° viewing angle.
LWP4SG-V2AB-JKPL-1
Osram Opto Semiconductors
Osram Opto Semiconductors' LWP4SG-V2AB-JKPL-1 is a 1.6mm single color LED with diffused lens, emitting white light at 1350.0mcd intensity. It has a max forward current of 0.02A and operates b/w -40 to 100°C, making it ideal for surface mount applications requiring high luminous output in a compact size.
570-0100-111F
Dialight
Dialight's 570-0100-111F is a single color LED array with separate, 3-element configuration. It has a peak wavelength of 627/590nm and max forward current of 0.03A. Ideal for applications requiring red light emission, such as indicator lights in electronic devices.
HLMP-3301-D0000
Broadcom
HLMP-3301-D0000 by Broadcom is a 5mm single color LED with peak wavelength of 635nm. It has a max forward current of 0.03A and viewing angle of 60°. Ideal for applications requiring high efficiency red light emission in bulk packaging, with radial mounting feature.
XHP50B-00-0000-0D0BJ40E5
Cree Led
SINGLE COLOR LED;
L-934GD-14V
Kingbright Electronic
L-934GD-14V by Kingbright Electronic is a 3mm green LED with a built-in resistor. It has a max forward current of 0.0135A and a peak wavelength of 565nm. This LED is commonly used in applications such as indicator lights and displays.
KP-1608CGCK
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 40.0; Lens Type: WATER CLEAR; Maximum Operating Temperature: 85 Cel;
1304
Wilbrecht Electronics
597-6601-607F
Dialight's 597-6601-607F LED has a peak wavelength of 468nm, max forward current of 0.02A, and water-clear lens. Ideal for applications requiring blue light emission with a viewing angle of 70°. Operating temp range from -55°C to 85°C makes it suitable for various lighting solutions.
HLMP-1790-A00A2
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.3; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
ASMB-MTB0-0A3A2
ASMB-MTB0-0A3A2 by Broadcom is a 2.4mm TRIPLE COLOR LED with COMMON ANODE, featuring red/green/blue colors and diffused lens. With peak wavelengths of 634/522/465nm, it has a viewing angle of 115° and nominal luminous intensity of 540.0/1600.0/350.0 mcd. Ideal for surface mount applications, it operates b/w -40 to 100 °C, with max forward current at 0.025 A and voltage at 2.6 V.
DX1093/RD
Bulgin
The Bulgin DX1093/RD is a 5mm single color LED with max forward current of 0.03A and forward voltage of 2V. Ideal for panel mount applications, it emits red light at 25.0mcd luminous intensity, operating b/w -40 to 85°C temperature range.
553-0312F
Dialight's 553-0312F is a dual color LED array with separate configuration, 3mm size, and built-in resistor. With red/green colors at peak wavelengths of 650/563nm, it has max forward current of 0.02A. Ideal for applications requiring radial mounting such as indicator lights in electronics.
HLMP-3301
Qt Optoelectronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 7; Lens Type: RED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
555-3009F
Dialight's 555-3009F is a 2mm single color LED with built-in resistor. It has a peak wavelength of 650nm, forward current of 0.0026A, and operates b/w -55 to 100°C. Ideal for applications requiring red light emission, such as indicator lights or signage.
KP-2012MGC
KP-2012MGC by Kingbright Electronic is a 1.3mm SINGLE COLOR LED with a peak wavelength of 574nm and water clear lens. Ideal for applications requiring a MEGA GREEN light source, it has a viewing angle of 120° and operates b/w -40 to 85 °C, making it suitable for various surface mount lighting projects.
APT1608ZGCK
Kingbright Electronic's APT1608ZGCK is a 1.2mm SINGLE COLOR LED with peak wavelength of 515nm, max forward current of 0.025A, and luminous intensity of 350mcd. Ideal for surface mount applications in electronics, offering water clear lens and green light emission with wide 120° viewing angle.
HSMH-C170
Hewlett Packard
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 17; Lens Type: DIFFUSED; Maximum Forward Current: .025 A;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SML-P11MTT86R
ROHM
ROHM SML-P11MTT86R is a surface mount single color LED with max forward current of 0.02A, clear lens, and green-yellow color at wavelength. It operates b/w -40°C to 85°C, ideal for applications requiring compact and efficient lighting solutions.
SML-P11MTT86RG
ROHM SML-P11MTT86RG is a 0.6mm SINGLE COLOR LED with 1.9V forward voltage and 1.3mcd luminous intensity. Ideal for surface mount applications, it operates b/w -40 to 85°C, emitting YELLOWISH GREEN light at 0.02A forward current.
SML-P11MTT86RH
ROHM SML-P11MTT86RH is a 0.6mm SINGLE COLOR LED with max. forward current of 0.02A and max. forward voltage of 1.9V. Ideal for surface mount applications, it emits YELLOWISH GREEN light with min. luminous intensity of 0.0016cd, suitable for TR packing method in optoelectronics at -40 to 85°C operating temp range.
SML-P11MTT86
ROHM SML-P11MTT86 is a 0.6mm SINGLE COLOR LED with max. forward current of 0.02A, emitting YELLOW GREEN light at 2.1mcd intensity. Ideal for surface mount applications in electronics due to its small size and color clarity.
SML-P11UTT86R
ROHM SML-P11UTT86R is a 0.6mm SINGLE COLOR LED with 0.02A forward current, emitting RED light at 2.5mcd luminous intensity. Ideal for surface mount applications in electronics due to its small size and color clarity.
SMLP36RGB2W3R
ROHM's SMLP36RGB2W3R is a 1.5mm TRIPLE COLOR LED with SEPARATE, 3 ELEMENTS configuration. It has a max forward current of 0.01A and operates b/w -40 to 85°C. Ideal for surface mount applications requiring red, green, and blue light outputs in compact electronic devices.
SMLP36RGB2W3RA
ROHM's SMLP36RGB2W3RA is a 1.5mm TRIPLE COLOR LED with SEPARATE, 3 ELEMENTS configuration. It has a max forward current of 0.01A and operates b/w -40 to 85°C. Ideal for applications requiring red, green, and blue light outputs in compact designs.
SMLP36RGB2W3RD
ROHM SMLP36RGB2W3RD is a 1.5mm TRIPLE COLOR LED with SEPARATE configuration. It has a max forward current of 0.01A and operates b/w -40 to 85°C. Ideal for applications requiring RGB illumination in compact spaces like consumer electronics and automotive lighting.
SML-P11UTT86RH
ROHM SML-P11UTT86RH is a 0.6mm SINGLE COLOR LED with 1.8V max forward voltage, ideal for applications requiring red light emission. With a max forward current of 0.02A and operating temperature range from -40 to 85°C, it offers high luminous intensity at 2.05mcd in a compact square shape for surface mount assembly.
SML-P24MUWT86R
DUAL COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 52.0/21.0; Lens Type: MILKY WHITE; Terminal Finish: GOLD OVER NICKEL;
SML-P11VTT86R
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; Lens Type: CLEAR; Terminal Finish: GOLD OVER NICKEL; Color At Wavelength: Red; Maximum Operating Temperature: 85 Cel;
SMLP12BC7TT86
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 17.0; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: GOLD OVER NICKEL;
SML-P24MUWT86RNR
DUAL COLOR LED;
SML-P11UTT86
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 5.5; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: GOLD OVER NICKEL;
SMLP34RGB2W3
TRIPLE COLOR LED; Terminal Finish: GOLD OVER NICKEL; JESD-609 Code: e4;
SMLP34RGB2W3C
SML-P11YTT86R
ROHM SML-P11YTT86R is a 0.6mm SINGLE COLOR LED with max forward current of 0.02A and max forward voltage of 2.1V. Ideal for applications requiring YELLOW light emission, such as indicator lights in electronic devices due to its small size and clear lens design.
SML-P12UTT86
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 85.0; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
SML-P12VTT86R
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 81.5; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: GOLD OVER NICKEL;
SML-P11UTT86RK
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 5.15; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: GOLD OVER NICKEL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved