Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 17.0; Lens Type: UNTINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
Median Price
$0.235
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Nova Conductors
$0.155
Bristol Electronics
$0.600
$0.300
$0.120
$0.075
ACDS - Activité Composants Distribution Service
Dan-Mar Components
TME
$0.097
$0.091
$0.081
Goldney Electronics S.L.
Vyrian
Digiode
Prism Electronics
ComSIT Distribution GmbH
Continental Prestige Electronics
$0.154
$0.151
Argo Parts USA
$0.149
Semicontronic
$0.200
$0.195
$0.194
Decca Corp
$0.196
Aztec Data Supply Inc.
$0.689
Corohmni
$0.706
Component Stockers USA
$0.720
$0.100
$0.090
Perfect Parts
Metaverse IC Inc.
QUARKTWIN TECHNOLOGY LTD
Supply Digital
Corphita
Visible LEDs HSMH-C191 attributes and parameters. Explore more Visible LEDs devices from Agilent Technologies
Color:
Color At Wavelength:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
JESD-609 Code:
Lens Type:
Minimum Luminous Intensity:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Maximum Reverse Voltage:
Shape:
Size:
Sub-Category:
Terminal Finish:
Terminal Pitch:
Viewing Angle:
HSMH-C191 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
PCN Obsolescence/ EOL - DK OBS NOTICE
PCN Assembly/Origin - HSM/QSM 20/Sep/2016
Agilent supports scientists in 110 countries in cutting-edge life science research; patient diagnostics; and testing required to ensure the safety of water, food and pharmaceuticals. Our advanced instruments, software, consumables, and services enable our customers to produce the most accurate and reliable results as well as optimal scientific, economic, and operational outcomes. We play a role in advancing important research and testing, with our scientists creating some of the world's most leading-edge technology and our field engineers working side by side with customers to help them maximize productivity. We bring these solutions to a variety of markets, from pharma and diagnostics to applied materials and chemicals. Together with our customers, we’re bringing great science to life.
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BAV99
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
SMBJ18CA
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
1N4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NE555D
Texas Instruments
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
National Semiconductor
LL4148
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
SS14
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
1N4148WT
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
551-0409F
Dialight
Dialight's 551-0409F LED is a 3mm red single color LED with peak wavelength of 650nm. It has a max forward current of 0.02A and forward voltage of 2V, suitable for applications requiring low power consumption and high visibility in products like electronic displays and indicators.
598-8250-107F
Dialight's 598-8250-107F is a 2mm WATER CLEAR LED with 0.025A max forward current, emitting YELLOW light at 130.0mcd luminous intensity. Ideal for surface mount applications in electronics, offering a wide 140° viewing angle and operating temperature range of -30 to 85°C.
CLP6C-FKB-CM1Q1H1BB7R3R3
Cree Led
TRIPLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; No. of Functions: 1; Color: RED/GREEN/BLUE; T-code: T1-1/2;
CMD6722SRUGCTR8
Chicago Miniature Lighting
DUAL COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 40.0/25.0; Lens Type: CLEAR; Configuration: SEPARATE, 2 ELEMENTS;
UHD1110-FKA-CL1A13R3Q1BBQFMF3
Wolfspeed
UHD1110-FKA-CL1A13R3Q1BBQFMF3 by Wolfspeed is a COMMON ANODE TRIPLE COLOR LED with 4 terminals. It has a Max Forward Current of 0.01 A and Max Operating Temperature of 85°C. Ideal for applications requiring RGB color output in compact spaces.
SML-LX23SUGC-TR
SML-LX23SUGC-TR by Lumex is a 2mm single color LED with peak wavelength of 574nm. It has a max forward current of 0.025A and viewing angle of 90°. Ideal for surface mount applications in electronics, displays, and indicators due to its super ultra green color and clear lens type.
LRTBGVTG-U5V5-1+A5B5-29+S9T9-49-20-R33-B
Osram Opto Semiconductors
Osram Opto Semiconductors' LRTBGVTG-U5V5-1+A5B5-29+S9T9-49-20-R33-B is a 2.8mm TRIPLE COLOR LED with peak wavelengths of 632/523/465nm, diffused lens, and max forward current of 0.04A. Ideal for surface mount applications in electronics requiring red/true green/blue illumination with a viewing angle of 120° and luminous intensity up to 2200mcd.
LTST-C171TBKT
Lite-on Technology
LTST-C171TBKT by Lite-on Technology is a 1.4mm BLUE LED with peak wavelength of 468nm and viewing angle of 130°. Ideal for surface mount applications, it has a max forward current of 0.02A and operates b/w -20°C to 80°C temperature range.
LSGT676-P7Q7-1+N7P7-24
Osram Opto Semiconductors' LSGT676-P7Q7-1+N7P7-24 is a dual-color LED with peak wavelengths of 645nm and 572nm. It has a max forward current of 0.03A, viewing angle of 120°, and nominal luminous intensity of 98.0/62.75mcd. Ideal for applications requiring super red/green colors in compact designs with surface mounting features.
1312
Wilbrecht Electronics
SINGLE COLOR LED;
XHP35B-00-0000-0D0BD430E
OVLLG8C7
Optek Technology
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 670.0; Lens Type: WATER CLEAR; Minimum Operating Temperature: -40 Cel;
HSMS-C170
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10; Lens Type: DIFFUSED; Terminal Finish: Gold (Au);
150060BS55040
Wuerth Elektronik & Kg
150060BS55040 by Wurth Elektronik is a 1mm blue LED with a peak wavelength of 465nm. It has a max forward current of 0.02A and operates b/w -40°C to 85°C. Ideal for applications requiring a single color LED with diffused lens, such as indicator lights in electronic devices.
IN-PI55TATPRPGPB
Inolux
IN-PI55TATPRPGPB by Inolux is a TRIPLE COLOR LED with max forward current of 0.012A, suitable for surface mount applications. With red/green/blue colors and nominal luminous intensity up to 1850mcd, it operates b/w -45°C to 85°C making it ideal for various visible LED lighting projects.
HLMP-4700
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.3; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
ASMT-YTD7-0AA02
Broadcom
ASMT-YTD7-0AA02 by Broadcom is a 2.3mm TRIPLE COLOR LED with separate, 3-element configuration and diffused lens. It has peak wavelengths of 630nm (RED), 522nm (GREEN), and 465nm (BLUE). Ideal for applications requiring colorful illumination with a viewing angle of 120° and nominal luminous intensities of up to 1900mcd.
APT1608SGC
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10.0; Lens Type: WATER CLEAR; Viewing Angle: 120 deg;
LWY1SG-BFOO-GKJM-1
SINGLE COLOR LED; Terminal Finish: SILVER; JESD-609 Code: e4;
597-3021-507F
Dialight's 597-3021-507F is a single color LED with peak wavelength of 650nm, forward current of 0.025A, and forward voltage of 2.8V. Ideal for surface mount applications, it emits red light with a viewing angle of 110° and luminous intensity of 6.3mcd.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HSMH-C190
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 17.0; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
HSMH-C190 by Broadcom is a 1mm single color LED with peak wavelength of 660nm. It has a max forward current of 0.025A and viewing angle of 170°. Ideal for surface mount applications, it offers red light with luminous intensity of 17.0mcd, making it suitable for various lighting and display purposes.
Hewlett Packard
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 11.65; Lens Type: DIFFUSED; Peak Wavelength (nm): 660;
HSMH-C170
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 17; Lens Type: DIFFUSED; Terminal Finish: Gold (Au);
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 17; Lens Type: DIFFUSED; Maximum Forward Current: .025 A;
HSMH-C170 by Broadcom is a single color LED with a peak wavelength of 660nm and a max forward current of 0.025A. It is commonly used in applications such as surface mount visible LED displays and indicators.
HSMH-C150
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 11.65; Lens Type: DIFFUSED; Terminal Pitch: 2.7 mm;
HSMH-C150 by Broadcom is a 2mm SINGLE COLOR LED with peak wavelength of 660nm. It has max forward current of 0.03A and viewing angle of 170°. Ideal for applications requiring red light emission, such as indicator lights in electronic devices.
HSMH-C191
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 17.0; Lens Type: UNTINTED DIFFUSED; Terminal Finish: GOLD OVER NICKEL;
HSMH-C265
HSMH-C265 by Broadcom is a single color LED with a peak wavelength of 660nm and a max forward current of 0.025A. It is commonly used in applications such as surface mount lighting due to its compact size (1.25mm) and high luminous intensity (17.0mcd).
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 17.0; Lens Type: NONDIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
HSMH-C120
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: UNTINTED NONDIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Nominal Luminous Intensity (mcd): 17.0; Lens Type: CLEAR UNTINTED NONDIFFUSED; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
HSMH-H190
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Configuration: SINGLE; Peak Wavelength (nm): 660; Shape: RECTANGULAR;
HSMH-C110
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Nominal Luminous Intensity (mcd): 19.0; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
HSMH-C110 by Broadcom is a single color LED with peak wavelength of 660nm and max forward current of 0.03A. It is ideal for applications requiring red light emission, with a clear untinted lens and surface mounting feature. Operating temperature ranges from -40 to 85°C, making it suitable for various electronic devices.
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 12.65; Lens Type: DIFFUSED; Height: 1.5 mm;
HSMH-A100-L00J1
Broadcom's HSMH-A100-L00J1 is a 2.2mm ROUND SINGLE COLOR LED with Peak Wavelength of 645nm, Max Forward Current of 0.03A, and Viewing Angle of 120°. Ideal for applications requiring RED light emission in surface mount configurations at temperatures ranging from -55 to 100 °C.
HSMH-C220
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 80.0; Lens Type: UNTINTED NONDIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved