Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
418217270904A by Wurth Elektronik is a slide DIP switch with SPST function and 4 switch sections. It features a max DC contact voltage of 24V, electrical life of 2000 cycles, and insulation resistance of 100M ohm. Ideal for applications requiring through-hole mounting in electronic circuits.
Median Price
$2.934
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Farnell
1+ parts
$2.380
100+ parts
$2.020
1k+ parts
-
10k+ parts
DigiKey
$2.690
$2.500
$1.923
Mouser Electronics
$2.840
$2.640
$2.230
$2.030
RS (Exports)
$3.027
$2.582
Newark
$3.030
$2.830
$2.420
$2.220
Element14
$4.030
$3.430
Distrelec
Nova Conductors
$2.227
VNN
Vyrian
Chip Stock
ComSIT Distribution GmbH
ComSIT USA
Continental Prestige Electronics
$1.240
$0.999
Semicontronic
$1.970
$1.959
Ampacity Inc.
Bastille Electronics
$2.116
$2.010
$1.982
Argo Parts USA
Corohmni
$4.214
Aztec Data Supply Inc.
$4.430
Lucentia Tech
$4.161
$3.853
The white color of the actuator provides good visibility and contrast, making it easier to see and operate the switch.
Polybutylene terephthalate is a durable and heat-resistant material, ensuring long-lasting performance of the switch.
The switch can be easily soldered by hand or using reflow soldering techniques, making it convenient for assembly.
Copper alloy terminals provide good conductivity and durability, leading to reliable electrical connections.
With a long electrical life of 2000 cycles, this switch is designed to withstand frequent use without degradation in performance.
High insulation resistance ensures electrical safety and minimizes leakage current in the switch.
The compact body width of 9.68 inch allows for efficient use of space and easy installation in tight layouts.
Having 4 switch sections allows for versatile configuration options and customization according to specific use cases.
Single Pole Single Throw (SPST) functionality provides a simple on/off operation, suitable for basic switching applications.
Gold plating on end contacts ensures reliable and low-resistance electrical connections, enhancing the overall performance of the switch.
DIP & SIP Switches 418217270904A attributes and parameters. Explore more DIP & SIP Switches devices from Wurth Elektronik
Insulation Resistance:
Contact Resistance:
Contact Maximum DC Rating (R Load):
Contact Maximum DC Current:
Contact Maximum DC Voltage:
Mounting Type:
Length/Diameter:
Height:
Width:
PCB Hole Count:
Packing Method:
Terminal Length:
Termination Type:
Contact End Plating:
Contact End Material:
Minimum Operating Temperature:
Maximum Operating Temperature:
Lifespan:
418217270904A Relays trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.90.65
SB
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
KSZ9031RNXIA
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
2N2222A
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
General Semiconductor
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
1N4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
LM358N
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
STM32H743BIT6
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
1-1571983-4
TE Connectivity
TE Connectivity 1-1571983-4 DIP & SIP Switch features POLYPHENYLENE SULPHIDE housing, COPPER ALLOY terminals, and GOLD OVER NICKEL plating. With SPST function and 10 switch sections, it's ideal for applications requiring ON-OFF control in electronic devices. Operating b/w -30 to 85°C, this slide dip switch offers reliable performance with a 1000-cycle electrical life.
A6S-0104-H
Omron
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Termination Type: SOLDER; Body Height: 3 mm; Body Length/Diameter: 26.34 mm; Insulation Resistance: 100000000 ohm;
SD04H0SBD
C & K Components
SD04H0SBD by C & K Components is a DIP & SIP switch with POLYPHTHALAMIDE housing and BRASS terminals. It offers 2000 cycles electrical life, 1000000000 ohm insulation resistance, and operates b/w -40 to 85 °C. Ideal for applications requiring SPST function, such as OFF-ON contact switching in electronic devices.
78RB05ST
Grayhill
Grayhill's 78RB05ST is a DIP switch with 5 sections, SPST function, and latched switch action. With electrical life of 2000 cycles, it operates b/w -40 to 85°C. Ideal for applications requiring slide DIP switches with through-hole mounting and solder termination.
219-5MST
Cts
219-5MST by Cts is a DIP & SIP switch with POLYETHYLENE housing, GOLD plating, and BERYLLIUM COPPER contacts. It has 5 switch sections, SPST function, and operates b/w -55 to 85 °C. Ideal for ON-OFF applications in electronics requiring a reliable slide dip switch with 2000 cycles electrical life.
A6D-5100
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; Maximum DC Contact Voltage: 30 V; Maximum DC Contact Current: .03 A; Body Width: 6.6 inch; null: 5;
NDS-04-V
Apem Components
NDS-04-V by Apem Components is a 4-section SPST slide DIP switch with gold-plated contacts, PBT actuator, and PA66 insulator. It has an electrical life of 2000 cycles and operates b/w -40°C to 85°C. Ideal for applications requiring reliable through-hole solder termination in electronic circuits.
TDP02H1SBD1
TDP02H1SBD1 by C & K Components is a SPST piano DIP switch with 1000 cycles electrical life. It features gold over nickel plating, copper alloy terminals, and glass-filled polyphenylene sulfide housing. Ideal for applications requiring a latched OFF-ON contact function in temperatures ranging from -20°C to 85°C.
EDS02SGRNTU04Q
TE Connectivity's EDS02SGRNTU04Q is a 2-section SPST slide DIP switch with white actuator and nylon housing. Featuring gold over nickel plating, it has max DC contact voltage of 24V and operates b/w -20°C to 85°C. Ideal for panel mounting applications requiring low current switching.
219-4MSTJRF
219-4MSTJRF by Cts is a DIP & SIP switch with POLYETHYLENE housing, GOLD plating, and BERYLLIUM COPPER contacts. It has 4 switch sections, SPST function, and operates b/w -55 to 85 °C. Ideal for OFF-ON applications with 2000 cycles electrical life and 1000000000 ohm insulation resistance.
A6SN-7102-P
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Minimum Operating Temperature: -30 Cel; Maximum Operating Temperature: 85 Cel; Electrical Life: 1000 Cycle(s); Contact Resistance: 200 mohm;
A6E-5101-N
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; null: SLIDE DIP SWITCH; Minimum Operating Temperature: -20 Cel; null: 5; Maximum DC Contact Current: .025 A;
3-5435640-0
TE Connectivity 3-5435640-0 is a DIP switch with GLASS FILLED POLYESTER housing, SPST function, and 3 switch sections. Ideal for applications requiring a max DC contact voltage of 40V and AC current of 1A. Features TOP ROCKER actuator type and LATCHED switch action for precise control in various electronic devices.
IKH0203000
The Apem Components IKH0203000 is a slide DIP switch with SPST function. Featuring gold over nickel plating, it has 2 switch sections and an electrical life of 1000 cycles. Ideal for applications requiring a latched switch action, this thermoplastic switch operates b/w -20°C to 70°C with a max DC contact voltage of 24V.
CHS-08TA1
Nidec Copal Electronics
CHS-08TA1 by Nidec Copal Electronics is a DIP & SIP switch with POLYPHENYLENE SULPHIDE housing, COPPER ALLOY terminals, and GOLD plating. It offers 8 switch sections, SPST function, and 2000 cycles electrical life. Ideal for applications requiring slide dip switches with 8 positions, such as in electronic devices operating b/w -40°C to 85°C.
5-1571999-6
TE Connectivity 5-1571999-6 is a SPST Piano DIP Switch with 8 sections, gold over nickel plating, and polyphenylene sulphide housing. It has an electrical life of 1000 cycles and operates b/w -30 to 85°C. Ideal for applications requiring momentary switch action in electronics.
A6S-8102-PH
Omron A6S-8102-PH is a DIP switch with 8 sections, SPST function, and gold-plated contacts. With IP40 sealing, it's waterproof and suitable for applications requiring ON-OFF contact function. Operating b/w -20 to 70°C, it has a DC rating of 0.025A@24VDC making it ideal for surface mount straight mounting in various electronic devices.
6-1825059-2
TE Connectivity's 6-1825059-2 is a SPST slide DIP switch with 10 sections, gold-plated contacts, and polyphenylene sulfide housing. It has a 1000-cycle electrical life, operates b/w -30°C to 85°C, and offers high insulation resistance of 100MΩ. Ideal for OFF-ON contact function applications requiring a latched switch action in electronics.
219-3MSTRF
219-3MSTRF by Cts is a DIP & SIP switch with POLYETHYLENE housing, GOLD plating, and BERYLLIUM COPPER contacts. It has 3 switch sections, OFF-ON function, and operates b/w -55 to 85 °C. Ideal for surface mount applications requiring a latched SLIDE DIP SWITCH with 2000 cycles electrical life.
2-1825059-4
Tyco Electronics Amp
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: POLYPHENYLENE SULPHIDE; null: FLUSH TYPE; null: COPPER ALLOY; Body Height: 3.5 mm;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
4-1825059-2
TE Connectivity 4-1825059-2 is a SPST slide DIP switch with 8 positions. It has a body width of 7.5mm, height of 3.5mm, and operates b/w -30 to 85°C. With gold center contact plating and copper alloy terminal material, it's ideal for panel mounting applications requiring OFF-ON contact function.
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: COPPER ALLOY; Body Height: 3.5 mm; Termination Type: SOLDER; null: POLYAMIDE6T;
4-1825059-9
TE Connectivity's 4-1825059-9 DIP & SIP Switch features SPST switch function, with 10 sections and OFF-ON contact function. With a max DC voltage of 24V and current rating of 0.1A, it is ideal for panel mount applications requiring latched switch action.
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Insulation Resistance: 1000000000 ohm; null: SOLVENT; Maximum DC Contact Voltage: 24 V; End Contact Plating: GOLD;
4-1825059-1
TE Connectivity 4-1825059-1 is a SPST slide DIP switch with 8 positions. It features polyphenylene sulfide housing, copper alloy terminals, and nickel-plated contacts. Ideal for applications requiring OFF-ON contact function in electronic devices.
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Additional Features: APPROVAL: UL; null: LATCHED; Maximum Operating Temperature: 85 Cel; null: GOLD;
4-1825059-0
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: POLYAMIDE6T; Maximum DC Contact Voltage: 24 V; Body Width: 7.5 inch; Maximum DC Contact Current: .1 A;
DIP Switches; Mounting Feature: PANEL MOUNT; Termination Type: SOLDER; End Contact Material: COPPER ALLOY; Maximum AC Contact Current: 1 A; Contact Resistance: 100 mohm;
418217270908A
Wurth Elektronik
418217270908A by Wurth Elektronik is a Slide DIP Switch with SPST function and 8 switch sections. It features a Polybutylene Terephthalate housing, Copper Alloy terminals, and Gold plating for enhanced durability. Ideal for applications requiring a max DC contact voltage of 24V, such as consumer electronics and industrial control systems.
418217270906A
DIP Switches; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; null: SPST; null: HAND/REFLOW; Body Length/Diameter: 16.24 mm; Packing Method: TUBE;
418217270902A
418217270902A by Wurth Elektronik is a DIP & SIP switch with a white actuator and a polybutylene terephthalate housing material. It has a solderability of hand/reflow and a max DC contact current of 0.025 A. This switch is commonly used in electronic devices for circuit control and signal routing applications.
418217270903
DIP Switches; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; null: WHITE; Maximum Contact DC Rating (R Load): 0.025A@24VDC; Maximum DC Contact Current: .025 A; Minimum Operating Temperature: -40 Cel;
418217270904
DIP Switches; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Minimum Operating Temperature: -40 Cel; null: .043 inch; null: SPST; Electrical Life: 2000 Cycle(s);
418217270908
DIP Switches; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; End Contact Material: COPPER ALLOY; JESD-609 Code: e3; null: RAISED TYPE; null: WHITE;
418217270909
DIP Switches; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; null: LATCHED; null: POLYAMIDE66; Electrical Life: 2000 Cycle(s); Maximum Contact DC Rating (R Load): 0.025A@24VDC;
418217270910
DIP Switches; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Termination Type: SOLDER; null: SPST; null: POLYBUTYLENE TEREPHTHALATE; Body Height: 9.6 mm;
418217270912
DIP Switches; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Minimum Operating Temperature: -40 Cel; Maximum DC Contact Voltage: 24 V; null: 12; PCB Hole Count: 24;
418217270903A
DIP Switches; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; null: LATCHED; null: WHITE; Insulation Resistance: 100000000 ohm; Termination Type: SOLDER;
418217270905A
DIP Switches; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; null: RAISED TYPE; null: WHITE; Body Width: 9.68 inch; Maximum DC Contact Voltage: 24 V;
418217270910A
DIP Switches; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Minimum Operating Temperature: -40 Cel; Body Width: 9.68 inch; Maximum Contact DC Rating (R Load): 0.025A@24VDC; Body Height: 9.9 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved