Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Nidec Copal Electronics' CHS-04TB1 is a 4-section SPST slide DIP switch with gold-plated contacts, suitable for applications requiring a max DC contact voltage of 6V and current of 0.1A. With a reflow solderable housing made of polyphenylene sulphide, it offers an electrical life of 2000 cycles and insulation resistance of 1G ohm, making it ideal for surface mount straight mounting in various electronic devices.
Median Price
$2.406
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Farnell
1+ parts
$1.898
100+ parts
$1.266
1k+ parts
-
10k+ parts
Chip1Stop
$2.020
Newark
$2.630
$2.010
$1.530
Mouser Electronics
$2.690
$2.060
$1.400
Element14
$4.550
$3.280
Verical
$2.183
$1.337
Nova Conductors
$1.567
Vyrian
Bastille Electronics
$1.489
$1.414
$1.395
Continental Prestige Electronics
$1.536
Argo Parts USA
Advanced Electronics
$2.613
$2.587
$2.482
Aztec Data Supply Inc.
$2.910
AZTECH Wire
$11.460
$11.010
$10.790
$10.570
Neutron USA
$47.800
Kepictronics
Provides excellent heat resistance and chemical resistance, making the switch durable and reliable in harsh environments.
Allows for easy and reliable soldering during the assembly process, ensuring a strong connection.
Long electrical life ensures consistent performance over a large number of switching cycles, resulting in reliable operation.
High insulation resistance prevents leakage current and enhances the safety of the electrical circuit.
Multiple switch sections provide versatility and allow for different configurations in the circuit.
Single Pole, Single Throw configuration simplifies the circuit design and operation, making it suitable for various applications.
Gold plating ensures excellent conductivity and corrosion resistance, improving the overall performance and longevity of the switch.
High maximum operating temperature range allows for use in a wide range of operating conditions without compromising performance.
Low minimum operating temperature ensures the switch can function reliably even in extremely cold environments.
Slide actuator design offers simple and intuitive operation, making it easy for users to control the switch.
Suitable for low voltage applications, providing reliable switching for electronic circuits requiring up to 6 volts.
DIP & SIP Switches CHS-04TB1 attributes and parameters. Explore more DIP & SIP Switches devices from Nidec Copal Electronics
Insulation Resistance:
Contact Resistance:
Contact Maximum DC Rating (R Load):
Contact Maximum DC Current:
Contact Maximum DC Voltage:
Mounting Type:
Length/Diameter:
Height:
Width:
Packing Method:
Termination Type:
Terminal Finish:
Contact End Plating:
Contact End Material:
Minimum Operating Temperature:
Maximum Operating Temperature:
Lifespan:
JESD-609 Code:
Additional Features:
CHS-04TB1 Relays trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.90.65
SB
PCN Packaging - Mult Dev Reel Color Chg 30/Jan/2019
NIDEC COMPONENTS is a professional group that has over 50 years of experience and technical expertise as an electronics component manufacture which covers fields from industrial equipment to consumer electronics. Our business domain extends to each field in electronic & mechanical components, sensors and actuators. We have won praise and top market shares in each category of industrial machinery. Behind our strong track record is our entrepreneurial spirit that we have inherited since our founding as part of our DNA. Our stance of constantly seeking the next point of view, the next technology and the next value, as well as taking up challenges together with our customers, remains unchanged. In the future, we will continue to produce one after another highly value-added products that meet the needs of the times and we will contribute to the manufacturing of our customers, as well as a prosperous future for people and society which is linked to that.
1N4148
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
4554
Jw Miller Magnetics
Other Semiconductors;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
2N2222A
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
EU2B-YS3303C
Idec
ROTARY SWITCH;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
BAV99
Electronic Devices
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM555CMX
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Dc Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
1N4148WT
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SN65HVD230DR
Texas Instruments
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
BD04AV
C & K Components
DIP Switches; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Electrical Life: 10000 Cycle(s); Minimum Operating Temperature: -40 Cel; null: GLASS FILLED NYLON; PCB Hole Count: 8;
1825006-4
TE Connectivity
The TE Connectivity 1825006-4 is a DIP & SIP switch with SPST function. It features POLYPHENYLENE SULPHIDE housing, COPPER ALLOY terminals, and GOLD OVER NICKEL plating. With TAPE SEALED sealing, it has an electrical life of 1000 cycles and operates b/w -30 to 85°C. Ideal for ON-OFF applications in electronics requiring a compact slide design.
A6TN-7104
Omron
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; null: 7; Maximum Operating Temperature: 85 Cel; Maximum DC Contact Voltage: 24 V; Electrical Life: 1000 Cycle(s);
EDSP08SGLFNTR04
TE Connectivity's EDSP08SGLFNTR04 is a 8-section SPST DIP switch with GOLD OVER NICKEL plating. Featuring NYLON housing and COPPER ALLOY contacts, it has a body height of 5mm and operates b/w -20 to 85°C. Ideal for PANEL MOUNT applications, this PIANO DIP SWITCH has a max DC contact voltage of 24V and current of 0.025A.
218-6LPSTF
Cts
The Cts 218-6LPSTF is a slide DIP switch with 6 sections, SPST function, and gold flash terminal finish. It has an electrical life of 1000 cycles and operates b/w -55 to 85°C. Ideal for surface mount applications requiring latched switch action in electronic devices.
A6TR-6104
Omron A6TR-6104 is a 6PST piano DIP switch with gold terminal finish. It has an electrical life of 1000 cycles and can handle a max DC contact voltage of 24V at 0.025A. Ideal for applications requiring through-hole mounting, such as consumer electronics and industrial control systems.
1-5435802-9
TE Connectivity 1-5435802-9 is a PIANO DIP SWITCH with 9 sections, SPST function, and TIN plating. It has GLASS FILLED POLYESTER housing material and COPPER ALLOY end contacts. Ideal for applications requiring momentary switch action in temperatures ranging from -55 to 105°C.
A6HF-8102-P
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: 8; Minimum Operating Temperature: -30 Cel; JESD-609 Code: e4; Body Height: 2.2 mm;
1825057-9
TE Connectivity's 1825057-9 is a SPST slide DIP switch with 10 positions and gold over nickel plating. With a max DC contact current of 1A, it is ideal for applications requiring reliable switching in temperatures ranging from -30 to 85°C. The switch features a polyphenylene sulphide housing material and copper alloy end contacts, making it durable and suitable for various electronic devices.
A6T-1102
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; Maximum Contact DC Rating (R Load): .025A@24VDC; null: 0 deg; PCB Hole Count: 2; null: LATCHED;
A6FR-0104
DIP Switches; null: PIANO DIP SWITCH;
GDH06SA04
TE Connectivity's GDH06SA04 is a 6-section SPST slide DIP switch with white actuator and polyphenylene sulphide housing. It features gold over nickel plating, copper alloy contacts, and can handle 0.1A AC/DC current at 50V. Ideal for panel mounting applications in electronics requiring reliable switching capabilities.
208-8
The Cts 208-8 DIP & SIP Switch offers 2000 cycles of electrical life, SPST switch function, and 8 switch sections. With a body width of 9.78in and height of 7.6mm, it is ideal for applications requiring a latched slide DIP switch with through-hole-straight mounting. Operating b/w -55°C to 85°C, this switch has a max DC contact rating of 0.05A@24VDC in an anti-static tube packing method.
3-1825059-8
TE Connectivity's 3-1825059-8 DIP & SIP Switch features SPST switch function, 1000 cycles electrical life, and 100M ohm insulation resistance. Ideal for panel mounting applications with a max operating temperature of 85°C and DC contact current of 0.1A@24VDC.
A6H-0102-P
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Maximum Contact DC Rating (R Load): .025A@24VDC; Body Height: 1.45 mm; null: LATCHED; null: SLIDE DIP SWITCH;
218-4LPST
218-4LPST by Cts is a DIP & SIP switch with 4 sections, SPST function, and OFF-ON contact. Featuring BERYLLIUM COPPER end contacts and PHOSPHOR BRONZE terminals, it has an electrical life of 1000 cycles. Ideal for applications requiring a latched slide dip switch with a max DC rating of 0.025A@24VDC.
218-8LPSTRF
Cts 218-8LPSTRF is a slide DIP switch with 8 sections, SPST function, and gold flash terminal finish. It has an electrical life of 1000 cycles and operates b/w -55°C to 85°C. Ideal for surface mount applications requiring latched switch action in electronic devices.
2-1825059-4
TE Connectivity's 2-1825059-4 DIP & SIP Switch features POLYPHENYLENE SULPHIDE housing, COPPER ALLOY terminals, and NICKEL plating. With SPST function and 5 switch sections, it is ideal for OFF-ON contact applications. This slide DIP switch has a max DC voltage of 24V and operates b/w -30°C to 85°C, making it suitable for various electronic devices.
A6S-0104
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Body Height: 3 mm; Maximum DC Contact Current: .025 A; null: .028 inch; Terminal Finish: Gold (Au);
219-4LPSTR
219-4LPSTR by Cts is a DIP & SIP switch with POLYETHYLENE housing, GOLD plating, and BERYLLIUM COPPER contacts. It has 4 sections, SPST function, and operates b/w -55 to 85 °C. Ideal for ON-OFF applications with 2000 cycles durability at 0.1A@20VDC rating.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CHS-01TA
Nidec Copal Electronics
The Nidec Copal Electronics CHS-01TA is a waterproof slide DIP switch with SPST function. It has a max DC contact voltage of 6V and electrical life of 2000 cycles. Ideal for applications requiring reflow solderability, such as consumer electronics and industrial control systems.
CHS-01TB
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: SLIDE; Maximum Operating Temperature: 85 Cel; null: 1; null: LATCHED;
CHS-04TA1
CHS-04TA1 by Nidec Copal Electronics is a DIP & SIP switch with POLYPHENYLENE SULPHIDE housing and COPPER ALLOY terminals. It offers 2000 cycles electrical life, 1000000000 ohm insulation resistance, and operates b/w -40 to 85 °C. Ideal for applications requiring a SPST switch function in electronic devices.
CHS-04TA
The Nidec Copal Electronics CHS-04TA is a waterproof slide DIP switch with 4 sections, SPST function, and gold-plated contacts. It has a 2000-cycle electrical life, operates b/w -40°C to 85°C, and offers high insulation resistance of 1Gohm. Ideal for applications requiring reliable switching in harsh environments.
CHS-01TB1
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Insulation Resistance: 1000000000 ohm; null: COPPER ALLOY; Contact Resistance: 50 mohm; Electrical Life: 2000 Cycle(s);
CHS-01TA1
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Body Height: 2.5 mm; null: SLIDE; End Contact Material: COPPER ALLOY; null: SPST;
CHS-01TA2
Nidec Copal Electronics' CHS-01TA2 is a SPST slide DIP switch with gold-plated contacts, suitable for applications requiring a 6VDC max contact voltage and 0.1A max current rating. With POLYPHENYLENE SULPHIDE housing and insulator material, it offers high insulation resistance of 1Gohm and withstands temperatures from -40 to 85°C. Ideal for surface mount-straight mounting, this switch has a compact design with dimensions of 5.6mm x 2.5mm x 2.5mm.
CHS-04TA2
CHS-04TA2 by Nidec Copal Electronics is a 4-section SPST slide DIP switch with gold-plated contacts, suitable for applications requiring a max DC contact voltage of 6V and current of 0.1A. With a reflow solderable copper alloy terminal finish, it offers an electrical life of 2000 cycles and insulation resistance of 1Gohm. Ideal for surface mount straight mounting in electronic devices operating b/w -40°C to 85°C.
CHS-01TB2
Nidec Copal Electronics' CHS-01TB2 is a slide DIP switch with SPST function, 2000 cycle electrical life, and reflow solderability. Made of polyphenylene sulphide, it has gold-plated contacts and operates b/w -40°C to 85°C. Ideal for surface mount applications requiring a compact 2.5mm height and 5.4mm length switch with a max DC rating of 0.1A@6VDC.
CHS-04TB
CHS-04TB by Nidec Copal Electronics is a waterproof slide DIP switch with 4 sections, SPST function, and gold-plated contacts. It has a max DC contact voltage of 6V, electrical life of 2000 cycles, and operates b/w -40°C to 85°C. Ideal for applications requiring reliable switching in harsh environments.
CHS-02TA1
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Body Width: 4.1 inch; null: 2; null: POLYPHENYLENE SULPHIDE; Body Height: 2.5 mm;
CHS-02TA
The Nidec Copal Electronics CHS-02TA is a waterproof slide DIP switch with a max operating temperature of 85°C and a min operating temperature of -40°C. It has a max DC contact current of 0.1A and is commonly used in applications requiring surface mount straight mounting, such as electronic devices and industrial equipment.
CHS-04B
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Body Length/Diameter: 6.6 mm; End Contact Plating: GOLD; null: SLIDE DIP SWITCH; Maximum DC Contact Current: .1 A;
CHS-04TB2
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Maximum DC Contact Current: .1 A; Packing Method: TR, EMBOSSED, 10 INCH; End Contact Material: COPPER ALLOY; null: LATCHED;
CHS-02TA2
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Termination Type: SOLDER; null: 500VAC; null: REFLOW; null: COPPER ALLOY;
CHS-04B1
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: SLIDE DIP SWITCH; Additional Features: LOW PROFILE; null: COPPER ALLOY; null: GOLD;
CHS-06A
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: COPPER ALLOY; null: LATCHED; Contact Resistance: 50 mohm; null: GOLD;
CHS-08TB
The Nidec Copal Electronics CHS-08TB is a waterproof slide DIP switch with 8 positions and SPST switch function. It has a max operating temperature of 85°C and min operating temperature of -40°C. This switch is commonly used in electronic devices requiring reflow solderability and high insulation resistance.
CHS-08TA1
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; End Contact Material: COPPER ALLOY; null: POLYPHENYLENE SULPHIDE; null: SLIDE DIP SWITCH; Maximum DC Contact Current: .1 A;
CHS-04TB13
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: SLIDE; null: POLYAMIDE; Body Width: 5.4 inch; null: LATCHED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved