Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CHS-04TB by Nidec Copal Electronics is a waterproof slide DIP switch with 4 sections, SPST function, and gold-plated contacts. It has a max DC contact voltage of 6V, electrical life of 2000 cycles, and operates b/w -40°C to 85°C. Ideal for applications requiring reliable switching in harsh environments.
Median Price
$1.980
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Farnell
1+ parts
$1.650
100+ parts
$1.220
1k+ parts
-
10k+ parts
Chip1Stop
$2.310
$1.590
$1.280
$1.140
Newark
$2.500
$1.790
$1.680
DigiKey
$1.426
$1.279
Verical
Nova Conductors
$1.734
TME
$2.170
$1.520
$1.360
$1.300
IBS Electronics
$0.923
$0.808
Chip Stock
Vyrian
NAC Semi
$1.450
$1.340
LIBRA Elektronik GmbH
QIE Inc.
J2 Sourcing AB
Tectiva GmbH
Euro-Tech
Prism Electronics
Semtec, LLC
NexGen Digital
Aranea Global
$1.699
$1.631
Argo Parts USA
Continental Prestige Electronics
$2.410
$1.990
Aztec Data Supply Inc.
$2.690
Advanced Electronics
$3.641
$3.313
$2.986
Neutron USA
$46.680
RC Electronics
Authorized Procurement Solutions
Eastek
$1.000
Kepictronics
Assy Fe
Formix International (Excess)
This material provides excellent durability and heat resistance, making the switch suitable for a wide range of environments.
Reflow soldering process ensures strong and reliable connections, improving the overall performance of the switch.
With a high electrical life cycle, this switch offers long-lasting performance and reliability.
High insulation resistance ensures minimal electrical leakage and interference, maintaining signal integrity.
Waterproof sealing makes this switch ideal for applications where exposure to moisture or liquids is a concern.
Single Pole Single Throw design provides simplicity and reliability for basic switching applications.
Slide actuator design offers easy and convenient switching action, adding user-friendly functionality to the switch.
With a maximum DC rating of 0.1A at 6VDC, this switch is suitable for low-power applications.
Solder termination ensures secure electrical connections, preventing issues such as intermittent contact or signal loss.
Surface mount straight mounting feature allows for easy and secure installation on PCBs, saving space and improving overall board layout.
DIP & SIP Switches CHS-04TB attributes and parameters. Explore more DIP & SIP Switches devices from Nidec Copal Electronics
Insulation Resistance:
Contact Resistance:
Contact Maximum DC Rating (R Load):
Contact Maximum DC Current:
Contact Maximum DC Voltage:
Mounting Type:
Length/Diameter:
Height:
Width:
Packing Method:
Termination Type:
Terminal Finish:
Contact End Plating:
Contact End Material:
Minimum Operating Temperature:
Maximum Operating Temperature:
Sealing Type:
Lifespan:
JESD-609 Code:
Additional Features:
CHS-04TB Relays trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.90.65
SB
PCN Packaging - Mult Dev Reel Color Chg 30/Jan/2019
NIDEC COMPONENTS is a professional group that has over 50 years of experience and technical expertise as an electronics component manufacture which covers fields from industrial equipment to consumer electronics. Our business domain extends to each field in electronic & mechanical components, sensors and actuators. We have won praise and top market shares in each category of industrial machinery. Behind our strong track record is our entrepreneurial spirit that we have inherited since our founding as part of our DNA. Our stance of constantly seeking the next point of view, the next technology and the next value, as well as taking up challenges together with our customers, remains unchanged. In the future, we will continue to produce one after another highly value-added products that meet the needs of the times and we will contribute to the manufacturing of our customers, as well as a prosperous future for people and society which is linked to that.
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
SMMBT2222ALT1G
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
2N2222A
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
1N4148
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
MBRA160T3G
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
9-435626-2
Tyco Electronics Alcoswitch
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; null: SPST; Sealing: TAPE SEALED; Body Width: 9.65 inch; Manufacturer Series: 435626;
76SB04T
Grayhill
Grayhill's 76SB04T is a SLIDE DIP SWITCH with 4 sections, SPST function, and 2000 cycles electrical life. Ideal for applications requiring a max DC contact voltage of 30V, such as through-hole mounting in electronic devices. Operating temperatures range from -40°C to 85°C for reliable performance.
1825057-7
TE Connectivity
TE Connectivity 1825057-7 is a SPST slide DIP switch with 8 positions. It features gold over nickel plating, copper alloy terminals, and polyphenylene sulfide housing material. Ideal for applications requiring latched switch action, OFF-ON contact function, and through hole-right angle mounting.
A6FR-0101
Omron
DIP Switches; null: PIANO DIP SWITCH;
219-2LPSTF
Cts
The Cts 219-2LPSTF is a DIP & SIP switch with POLYETHYLENE housing, GOLD plating, and BERYLLIUM COPPER contacts. It has 2000 cycles electrical life, 1000000000 ohm insulation resistance, and operates b/w -55 to 85 °C. Ideal for OFF-ON applications with 0.1A@20VDC rating in TUBE packaging.
SBS1002
Knitter-switch
The Knitter-switch SBS1002 is a waterproof slide DIP switch with 2000 cycles electrical life. Featuring gold over nickel plating, it has 2 switch sections and SPST function. Ideal for applications requiring OFF-ON contact function, this switch operates b/w -40°C to 85°C temperature range.
1-1825002-4
TE Connectivity 1-1825002-4 is a SPST slide DIP switch with 8 sections, gold over nickel plating, and copper alloy contacts. It has an electrical life of 1000 cycles and operates b/w -30 to 85°C. Ideal for applications requiring a latched switch action in through-hole mounting configurations.
2-1825059-5
Tyco Electronics Amp
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Maximum Contact DC Rating (R Load): 0.1A@24VDC; Additional Features: APPROVAL: UL; null: POLYAMIDE6T; Contact Resistance: 100 mohm;
A6S-4102
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: FLAT TYPE; null: YELLOW; null: LATCHED; Body Length/Diameter: 11.1 mm;
2319764-4
TE Connectivity's 2319764-4 is a PIANO DIP SWITCH with 8 switch sections, SPST function, and GOLD OVER NICKEL plating. Ideal for PANEL MOUNT applications, it has a body height of 5mm, operates b/w -20 to 85°C temperatures, and supports up to 0.025A AC/DC current.
1825057-3
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; Maximum Operating Temperature: 85 Cel; null: LATCHED; null: SPST; Body Width: 7.49 inch;
GDH08S04
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Maximum Operating Temperature: 85 Cel; null: SLIDE DIP SWITCH; JESD-609 Code: e4; Maximum Contact DC Rating (R Load): .025A@24VDC;
ADF04STTR
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Sealing: TAPE SEALED; null: LATCHED; null: SPST; Packing Method: TAPE AND REEL;
A6H-4101-PM
Omron A6H-4101-PM is a 4-section SPST slide DIP switch with 1000 cycles electrical life. It operates b/w -20°C to 70°C, handling up to 0.025A@24VDC. Ideal for surface mount applications, it features solder termination and comes in tape and reel packing.
A6S-7101-PH
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: LATCHED; JESD-609 Code: e4; Maximum DC Contact Voltage: 24 V; null: 7;
ADF10STTR
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Packing Method: TAPE AND REEL; Manufacturer Series: AD; null: SPST; Sealing: TAPE SEALED;
A6S-3101-PMH
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Minimum Operating Temperature: -20 Cel; Packing Method: TR, EMBOSSED; null: FLAT TYPE; Maximum DC Contact Current: .025 A;
A6S-5101-H
Omron A6S-5101-H DIP switch has 5 sections, SPST function, and gold-plated contacts. With IP40 sealing, it offers 1000 cycles electrical life and operates b/w -20°C to 70°C. Ideal for applications requiring ON-OFF contact function in compact spaces.
A6TR-6104
Omron A6TR-6104 is a 6PST piano DIP switch with gold terminal finish. It has an electrical life of 1000 cycles and can handle a max DC contact voltage of 24V at 0.025A. Ideal for applications requiring through-hole mounting, such as consumer electronics and industrial control systems.
A6S-6104-PMH
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Body Height: 3 mm; null: LATCHED; null: .028 inch; null: ON-OFF;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CHS-01TA
Nidec Copal Electronics
The Nidec Copal Electronics CHS-01TA is a waterproof slide DIP switch with SPST function. It has a max DC contact voltage of 6V and electrical life of 2000 cycles. Ideal for applications requiring reflow solderability, such as consumer electronics and industrial control systems.
CHS-01TB
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: SLIDE; Maximum Operating Temperature: 85 Cel; null: 1; null: LATCHED;
CHS-04TA1
CHS-04TA1 by Nidec Copal Electronics is a DIP & SIP switch with POLYPHENYLENE SULPHIDE housing and COPPER ALLOY terminals. It offers 2000 cycles electrical life, 1000000000 ohm insulation resistance, and operates b/w -40 to 85 °C. Ideal for applications requiring a SPST switch function in electronic devices.
CHS-04TA
The Nidec Copal Electronics CHS-04TA is a waterproof slide DIP switch with 4 sections, SPST function, and gold-plated contacts. It has a 2000-cycle electrical life, operates b/w -40°C to 85°C, and offers high insulation resistance of 1Gohm. Ideal for applications requiring reliable switching in harsh environments.
CHS-01TB1
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Insulation Resistance: 1000000000 ohm; null: COPPER ALLOY; Contact Resistance: 50 mohm; Electrical Life: 2000 Cycle(s);
CHS-01TA1
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Body Height: 2.5 mm; null: SLIDE; End Contact Material: COPPER ALLOY; null: SPST;
CHS-01TA2
Nidec Copal Electronics' CHS-01TA2 is a SPST slide DIP switch with gold-plated contacts, suitable for applications requiring a 6VDC max contact voltage and 0.1A max current rating. With POLYPHENYLENE SULPHIDE housing and insulator material, it offers high insulation resistance of 1Gohm and withstands temperatures from -40 to 85°C. Ideal for surface mount-straight mounting, this switch has a compact design with dimensions of 5.6mm x 2.5mm x 2.5mm.
CHS-04TA2
CHS-04TA2 by Nidec Copal Electronics is a 4-section SPST slide DIP switch with gold-plated contacts, suitable for applications requiring a max DC contact voltage of 6V and current of 0.1A. With a reflow solderable copper alloy terminal finish, it offers an electrical life of 2000 cycles and insulation resistance of 1Gohm. Ideal for surface mount straight mounting in electronic devices operating b/w -40°C to 85°C.
CHS-01TB2
Nidec Copal Electronics' CHS-01TB2 is a slide DIP switch with SPST function, 2000 cycle electrical life, and reflow solderability. Made of polyphenylene sulphide, it has gold-plated contacts and operates b/w -40°C to 85°C. Ideal for surface mount applications requiring a compact 2.5mm height and 5.4mm length switch with a max DC rating of 0.1A@6VDC.
CHS-02TA1
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Body Width: 4.1 inch; null: 2; null: POLYPHENYLENE SULPHIDE; Body Height: 2.5 mm;
CHS-04TB1
Nidec Copal Electronics' CHS-04TB1 is a 4-section SPST slide DIP switch with gold-plated contacts, suitable for applications requiring a max DC contact voltage of 6V and current of 0.1A. With a reflow solderable housing made of polyphenylene sulphide, it offers an electrical life of 2000 cycles and insulation resistance of 1G ohm, making it ideal for surface mount straight mounting in various electronic devices.
CHS-02TA
The Nidec Copal Electronics CHS-02TA is a waterproof slide DIP switch with a max operating temperature of 85°C and a min operating temperature of -40°C. It has a max DC contact current of 0.1A and is commonly used in applications requiring surface mount straight mounting, such as electronic devices and industrial equipment.
CHS-04B
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Body Length/Diameter: 6.6 mm; End Contact Plating: GOLD; null: SLIDE DIP SWITCH; Maximum DC Contact Current: .1 A;
CHS-04TB2
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Maximum DC Contact Current: .1 A; Packing Method: TR, EMBOSSED, 10 INCH; End Contact Material: COPPER ALLOY; null: LATCHED;
CHS-02TA2
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Termination Type: SOLDER; null: 500VAC; null: REFLOW; null: COPPER ALLOY;
CHS-04B1
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: SLIDE DIP SWITCH; Additional Features: LOW PROFILE; null: COPPER ALLOY; null: GOLD;
CHS-06A
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: COPPER ALLOY; null: LATCHED; Contact Resistance: 50 mohm; null: GOLD;
CHS-08TB
The Nidec Copal Electronics CHS-08TB is a waterproof slide DIP switch with 8 positions and SPST switch function. It has a max operating temperature of 85°C and min operating temperature of -40°C. This switch is commonly used in electronic devices requiring reflow solderability and high insulation resistance.
CHS-08TA1
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; End Contact Material: COPPER ALLOY; null: POLYPHENYLENE SULPHIDE; null: SLIDE DIP SWITCH; Maximum DC Contact Current: .1 A;
CHS-04TB13
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: SLIDE; null: POLYAMIDE; Body Width: 5.4 inch; null: LATCHED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved