Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CHS-02TA1 by Nidec Copal Electronics is a 2-position SPST slide DIP switch with gold-plated contacts, suitable for applications requiring a max DC contact voltage of 6V and current of 0.1A. With a body width of 4.1mm and height of 2.5mm, it features POLYPHENYLENE SULPHIDE housing material and copper alloy terminals, making it ideal for surface mount-straight mounting in electronic devices.
Median Price
$2.381
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$2.350
100+ parts
$0.850
1k+ parts
$0.704
10k+ parts
$0.640
Element14
$1.823
$1.421
$1.295
Newark
$2.450
$1.870
$1.430
-
Farnell
$2.711
$1.984
Verical
$1.977
$1.207
Nova Conductors
$1.470
Vyrian
Advanced Electronics
$1.137
$1.080
Aranea Global
$1.441
$1.383
Continental Prestige Electronics
Argo Parts USA
Aztec Data Supply Inc.
$4.510
Neutron USA
$46.040
Assy Fe
Kepictronics
Futuretech Components
Highly durable material that can withstand various environmental conditions, ensuring the longevity of the switch.
Allows for easy and reliable soldering during installation, ensuring a secure connection.
With a high electrical life cycle, this switch is reliable and long-lasting for repeated use.
High insulation resistance ensures minimal leakage current and reliable performance.
Can operate in high-temperature environments without a decrease in performance.
Can operate in low-temperature environments without any issues, making it versatile for various applications.
DIP & SIP Switches CHS-02TA1 attributes and parameters. Explore more DIP & SIP Switches devices from Nidec Copal Electronics
Insulation Resistance:
Contact Resistance:
Contact Maximum DC Rating (R Load):
Contact Maximum DC Current:
Contact Maximum DC Voltage:
Mounting Type:
Length/Diameter:
Height:
Width:
Packing Method:
Termination Type:
Terminal Finish:
Contact End Plating:
Contact End Material:
Minimum Operating Temperature:
Maximum Operating Temperature:
Lifespan:
JESD-609 Code:
Additional Features:
CHS-02TA1 Relays trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.90.65
SB
PCN Packaging - Mult Dev Reel Color Chg 30/Jan/2019
NIDEC COMPONENTS is a professional group that has over 50 years of experience and technical expertise as an electronics component manufacture which covers fields from industrial equipment to consumer electronics. Our business domain extends to each field in electronic & mechanical components, sensors and actuators. We have won praise and top market shares in each category of industrial machinery. Behind our strong track record is our entrepreneurial spirit that we have inherited since our founding as part of our DNA. Our stance of constantly seeking the next point of view, the next technology and the next value, as well as taking up challenges together with our customers, remains unchanged. In the future, we will continue to produce one after another highly value-added products that meet the needs of the times and we will contribute to the manufacturing of our customers, as well as a prosperous future for people and society which is linked to that.
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
SN6505BDBVR
Texas Instruments
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
SMBJ18CA
Lite-on Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358M
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
DS18B20+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
NDT2955
Onsemi
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
BAV99
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Semtech Electronics
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WS
Taiwan Semiconductor
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
A6HF-4102
Omron
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Body Height: 2.2 mm; Maximum DC Contact Current: .025 A; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -30 Cel;
TDA02H0SB1R
C & K Components
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: SLIDE; Terminal Finish: GOLD OVER NICKEL; Body Height: 2.2 mm; End Contact Plating: GOLD OVER NICKEL;
DS04-254-2-01BK-SMT-TR
Cui
Cui DS04-254-2-01BK-SMT-TR is a SPST slide DIP switch with 2000 cycles electrical life. Featuring gold-plated contacts, it operates b/w -40 to 85°C. Ideal for applications requiring a latched switch action and surface mount-straight mounting, offering reliable performance in various electronic devices.
219-4MSTR
Cts
219-4MSTR by Cts is a DIP & SIP switch with POLYETHYLENE housing, GOLD plating, and BERYLLIUM COPPER contacts. It has 4 switch sections, SPST function, and operates b/w -55 to 85 °C. Ideal for ON-OFF applications in electronics requiring a compact slide dip switch with high insulation resistance and wave solderability.
219-2MSTJR
219-2MSTJR by Cts is a DIP & SIP switch with POLYETHYLENE housing, GOLD plating, and BERYLLIUM COPPER contacts. It has 2000 cycles electrical life, operates b/w -55 to 85 °C, and features ON-OFF function. Ideal for applications requiring SPST switches with 2 sections and medium actuator type.
A6D-9103
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; JESD-609 Code: e4; Maximum Contact DC Rating (R Load): .03A@30VDC; Maximum DC Contact Voltage: 30 V; Terminal Length: .181 inch;
CHS-01A
Nidec Copal Electronics
The Nidec Copal Electronics CHS-01A is a waterproof SPST slide DIP switch with gold-plated contacts. Featuring a 2000-cycle electrical life, it has a max DC contact voltage of 6V and operates b/w -40°C to 85°C. Ideal for surface mount applications, this switch offers reliable performance in various electronic devices.
A6SN-4101
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: ON-OFF; null: FLAT TYPE; Maximum Contact DC Rating (R Load): 0.025A@24VDC; null: 4;
1-1825059-4
TE Connectivity
TE Connectivity 1-1825059-4 is a SPST slide DIP switch with 4 positions, 1000 cycles electrical life, and 100M ohm insulation resistance. It has a polyphenylene sulfide housing material and copper alloy terminals. Ideal for panel mounting applications requiring a compact design and reliable switching performance in temperatures ranging from -30 to 85°C.
A6D-5103
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; Maximum Contact DC Rating (R Load): .03A@30VDC; null: SLIDE; null: 0 deg; Electrical Life: 2000 Cycle(s);
A6T-7101
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; null: SLIDE DIP SWITCH; Maximum Operating Temperature: 70 Cel; Maximum DC Contact Current: .025 A; null: SPST;
BD05
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; End Contact Material: PHOSPHOR BRONZE; JESD-609 Code: e3; null: 5; Body Height: 6.72 mm;
218-6LPSTJR
The Cts 218-6LPSTJR is a slide DIP switch with SPST function, gold terminal finish, and latched switch action. With 6 switch sections and 1000 cycles electrical life, it's ideal for surface mount applications requiring a max DC contact voltage of 24V. The switch operates b/w -55°C to 85°C temperatures in tape and reel packing method.
418121270802
Wuerth Elektronik & Kg
418121270802 by Wurth Elektronik is a Slide DIP Switch with SPST function. It has 2 switch sections, gold-plated end contacts, and copper alloy terminals. With a max DC contact voltage of 24V and operating temperatures from -40 to 85°C, it is ideal for ON-OFF applications in electronic devices requiring surface mount straight mounting.
A6HR-0104
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Maximum Operating Temperature: 85 Cel; Electrical Life: 1000 Cycle(s); Body Length/Diameter: 13.83 mm; Packing Method: TUBE;
A6HR-4104-P
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Terminal Finish: Gold (Au); JESD-609 Code: e4; Electrical Life: 1000 Cycle(s); null: 4PST;
TDA02H0SB1
Itt Cannon
TDA02H0SB1 by ITT Cannon is a DIP switch with 1000 cycles electrical life, SPST switch function, and gold flash terminal finish. It is ideal for applications requiring a slide DIP switch with latched switch action, such as in surface mount straight mounting features.
A6E-4104
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; PCB Hole Count: 8; null: MAKE-BEFORE-BREAK; Sealing: BOTTOM SEALED; JESD-609 Code: e4;
A6S-8102
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: 8; Termination Type: SOLDER; Maximum Contact DC Rating (R Load): 0.025A@24VDC; Maximum DC Contact Voltage: 24 V;
219-4ESJ
The Cts 219-4ESJ is a DIP & SIP switch with POLYETHYLENE housing, GOLD plating, and BERYLLIUM COPPER contacts. It has 4 sections, SPST function, and operates b/w -55 to 85 °C. Ideal for ON-OFF applications in electronics due to its extended actuator type and latched switch action.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CHS-01TA
The Nidec Copal Electronics CHS-01TA is a waterproof slide DIP switch with SPST function. It has a max DC contact voltage of 6V and electrical life of 2000 cycles. Ideal for applications requiring reflow solderability, such as consumer electronics and industrial control systems.
CHS-01TB
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: SLIDE; Maximum Operating Temperature: 85 Cel; null: 1; null: LATCHED;
CHS-04TA1
CHS-04TA1 by Nidec Copal Electronics is a DIP & SIP switch with POLYPHENYLENE SULPHIDE housing and COPPER ALLOY terminals. It offers 2000 cycles electrical life, 1000000000 ohm insulation resistance, and operates b/w -40 to 85 °C. Ideal for applications requiring a SPST switch function in electronic devices.
CHS-04TA
The Nidec Copal Electronics CHS-04TA is a waterproof slide DIP switch with 4 sections, SPST function, and gold-plated contacts. It has a 2000-cycle electrical life, operates b/w -40°C to 85°C, and offers high insulation resistance of 1Gohm. Ideal for applications requiring reliable switching in harsh environments.
CHS-01TB1
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Insulation Resistance: 1000000000 ohm; null: COPPER ALLOY; Contact Resistance: 50 mohm; Electrical Life: 2000 Cycle(s);
CHS-01TA1
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Body Height: 2.5 mm; null: SLIDE; End Contact Material: COPPER ALLOY; null: SPST;
CHS-01TA2
Nidec Copal Electronics' CHS-01TA2 is a SPST slide DIP switch with gold-plated contacts, suitable for applications requiring a 6VDC max contact voltage and 0.1A max current rating. With POLYPHENYLENE SULPHIDE housing and insulator material, it offers high insulation resistance of 1Gohm and withstands temperatures from -40 to 85°C. Ideal for surface mount-straight mounting, this switch has a compact design with dimensions of 5.6mm x 2.5mm x 2.5mm.
CHS-04TA2
CHS-04TA2 by Nidec Copal Electronics is a 4-section SPST slide DIP switch with gold-plated contacts, suitable for applications requiring a max DC contact voltage of 6V and current of 0.1A. With a reflow solderable copper alloy terminal finish, it offers an electrical life of 2000 cycles and insulation resistance of 1Gohm. Ideal for surface mount straight mounting in electronic devices operating b/w -40°C to 85°C.
CHS-01TB2
Nidec Copal Electronics' CHS-01TB2 is a slide DIP switch with SPST function, 2000 cycle electrical life, and reflow solderability. Made of polyphenylene sulphide, it has gold-plated contacts and operates b/w -40°C to 85°C. Ideal for surface mount applications requiring a compact 2.5mm height and 5.4mm length switch with a max DC rating of 0.1A@6VDC.
CHS-04TB
CHS-04TB by Nidec Copal Electronics is a waterproof slide DIP switch with 4 sections, SPST function, and gold-plated contacts. It has a max DC contact voltage of 6V, electrical life of 2000 cycles, and operates b/w -40°C to 85°C. Ideal for applications requiring reliable switching in harsh environments.
CHS-04TB1
Nidec Copal Electronics' CHS-04TB1 is a 4-section SPST slide DIP switch with gold-plated contacts, suitable for applications requiring a max DC contact voltage of 6V and current of 0.1A. With a reflow solderable housing made of polyphenylene sulphide, it offers an electrical life of 2000 cycles and insulation resistance of 1G ohm, making it ideal for surface mount straight mounting in various electronic devices.
CHS-02TA
The Nidec Copal Electronics CHS-02TA is a waterproof slide DIP switch with a max operating temperature of 85°C and a min operating temperature of -40°C. It has a max DC contact current of 0.1A and is commonly used in applications requiring surface mount straight mounting, such as electronic devices and industrial equipment.
CHS-04B
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Body Length/Diameter: 6.6 mm; End Contact Plating: GOLD; null: SLIDE DIP SWITCH; Maximum DC Contact Current: .1 A;
CHS-04TB2
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Maximum DC Contact Current: .1 A; Packing Method: TR, EMBOSSED, 10 INCH; End Contact Material: COPPER ALLOY; null: LATCHED;
CHS-02TA2
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Termination Type: SOLDER; null: 500VAC; null: REFLOW; null: COPPER ALLOY;
CHS-04B1
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: SLIDE DIP SWITCH; Additional Features: LOW PROFILE; null: COPPER ALLOY; null: GOLD;
CHS-06A
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: COPPER ALLOY; null: LATCHED; Contact Resistance: 50 mohm; null: GOLD;
CHS-08TB
The Nidec Copal Electronics CHS-08TB is a waterproof slide DIP switch with 8 positions and SPST switch function. It has a max operating temperature of 85°C and min operating temperature of -40°C. This switch is commonly used in electronic devices requiring reflow solderability and high insulation resistance.
CHS-08TA1
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; End Contact Material: COPPER ALLOY; null: POLYPHENYLENE SULPHIDE; null: SLIDE DIP SWITCH; Maximum DC Contact Current: .1 A;
CHS-02TB2
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Body Length/Diameter: 5.4 mm; Insulation Resistance: 1000000000 ohm; null: 500VAC; null: POLYPHENYLENE SULPHIDE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved