Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 1825059-7 DIP & SIP Switch features SPST switch function, 1000 cycles electrical life, and 100M ohm insulation resistance. With a max operating temp of 85°C, it is ideal for panel mount applications requiring a slide dip switch with OFF-ON contact function.
Median Price
$1.455
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$1.800
100+ parts
$1.390
1k+ parts
$1.240
10k+ parts
$1.160
Powell Electronics
-
$1.110
$0.780
Nova Conductors
$1.087
VNN
ComSIT Distribution GmbH
Vyrian
Semicontronic
$0.940
$0.916
$0.912
Continental Prestige Electronics
$1.065
Argo Parts USA
Netroflash
Aztec Data Supply Inc.
$3.637
Perfect Parts
Assy Fe
The white actuator color provides a clean and professional appearance, making it easy to distinguish and operate the switches.
Polyphenylene sulphide is known for its high temperature resistance and durability, ensuring the switches can withstand harsh environments.
Copper alloy terminals provide excellent conductivity and corrosion resistance, resulting in reliable electrical connections.
With a high electrical life rating of 1000 cycles, these switches are long-lasting and reliable for multiple uses.
High insulation resistance helps prevent electrical leakage and ensures the safety of the circuit.
The wide body width makes the switches easy to handle and operate, especially for individuals with larger fingers.
Having 3 switch sections allows for more customization and flexibility in the circuit design.
Single Pole Single Throw function is commonly used in many applications, providing a simple ON/OFF control.
Nickel plating on the end contacts enhances durability and corrosion resistance, ensuring long-lasting performance.
The same material as the housing provides consistent insulation properties throughout the switch.
Low body height allows for a compact design, making these switches suitable for space-constrained applications.
With a high maximum operating temperature of 85°C, these switches can handle elevated temperatures without compromising performance.
The high AC contact current rating of 1A allows for switching of moderate electrical loads without overheating.
With a low minimum operating temperature of -30°C, these switches can function reliably even in cold environments.
Consistent with the terminal material, the use of copper alloy on end contacts ensures reliable electrical connections.
Having 3 positions provides multiple settings and options for the user, increasing versatility in circuit configurations.
The flush actuator type provides a sleek and low-profile design, minimizing the risk of accidental activation or damage.
The maximum DC contact voltage of 24V allows for safe and reliable switching of DC circuits within the specified voltage range.
Slide DIP switches are easy to operate and provide a tactile feedback when changing positions, making them user-friendly.
Gold plating on the center contacts enhances conductivity and resistance to tarnishing, ensuring consistent performance over time.
The black body color gives a sleek and professional appearance, suitable for various applications and aesthetics.
With a high dielectric withstand voltage of 300VAC, these switches offer excellent insulation and safety in high voltage applications.
The OFF-ON contact function provides a clear indication of the switch position, making it easy to see whether the circuit is open or closed.
TR packing method ensures safe transportation and storage of the switches, reducing the risk of damage or contamination.
The compact body length/diameter allows for easy integration into various electronic devices and PCBs.
The maximum DC contact rating of 0.1A at 24VDC ensures reliable performance and safety within the specified electrical load limits.
Using copper alloy for the center contacts ensures consistent conductivity and reliability in the switching operation.
The maximum DC contact current rating of 0.1A allows for safe switching of low to moderate DC loads without overheating.
Latched switch action provides a secure and stable connection between the contacts, preventing accidental changes in position.
Solder termination type allows for easy and secure connection to the circuit board or wiring, ensuring reliable electrical connections.
Low contact resistance of 100mΩ ensures efficient electrical conduction and minimal power loss during switching.
Panel mount design allows for easy installation on various surfaces or panels, providing flexibility in mounting configurations.
Polyamide6T actuator material offers durability, impact resistance, and chemical resistance, ensuring long-lasting performance in demanding environments.
DIP & SIP Switches 1825059-7 attributes and parameters. Explore more DIP & SIP Switches devices from TE Connectivity
Insulation Resistance:
Contact Resistance:
Contact Maximum DC Rating (R Load):
Contact Maximum DC Current:
Contact Maximum DC Voltage:
Contact Maximum AC Current:
Mounting Type:
Length/Diameter:
Height:
Width:
Packing Method:
Termination Type:
Contact End Plating:
Contact End Material:
Minimum Operating Temperature:
Maximum Operating Temperature:
Lifespan:
Additional Features:
1825059-7 Relays trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.90.65
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
BAV99
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Digitron Semiconductors
B340A-13-F
Diodes Incorporated
B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
LL4148-GS08
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Taitron Components
SMBJ18CA
Fairchild Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
2N2222A
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
261
Deltrol Controls
Other Relays;
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
1825911-1
TE Connectivity
TE Connectivity 1825911-1 is a SLIDE DIP SWITCH with 8 sections, GOLD/NICKEL plating, and COPPER ALLOY terminals. With electrical life of 1000 cycles, it operates b/w -30 to 85 °C. Ideal for applications requiring surface mount-straight mounting feature and 0.1A@24VDC max contact DC rating.
EDS01SGRSTR04Q
TE Connectivity's EDS01SGRSTR04Q is a SPST slide DIP switch with gold over nickel plating. With 2000 cycles electrical life, it operates at temperatures from -20 to 85°C. Ideal for panel mounting applications, this switch has a max contact DC rating of 0.025A@24VDC.
A6ER-3104
Omron
DIP Switches; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Electrical Life: 1000 Cycle(s); Contact Resistance: 200 mohm; Maximum DC Contact Current: .025 A; Insulation Resistance: 100000000 ohm;
4-5435640-1
TE Connectivity's 4-5435640-1 is a DIP switch with 10 sections, SPST function, and TIN plating. With dimensions of 9.65" x 8.64mm x 27.43mm, it's ideal for applications requiring a max AC contact current of 1A and DC contact voltage of up to 40V in through-hole mounting setups.
2-5435802-9
Tyco Electronics Alcoswitch
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; null: 4; Body Length/Diameter: 12.2 mm; Body Width: 9.65 inch; Body Height: 7.37 mm;
219-4LPSTJRF
Cts
219-4LPSTJRF by Cts is a DIP & SIP switch with a polyethylene housing material and wave solderability. It has a max operating temperature of 85°C and is commonly used for OFF-ON contact function in surface mount applications.
416131160803
Wuerth Elektronik & Kg
416131160803 by Wurth Elektronik is a 3PST slide DIP switch with gold-plated contacts, suitable for reflow soldering. It features a polyphenylene sulphide housing, tape-sealed for protection, and has an electrical life of 1000 cycles. Ideal for applications requiring a compact, surface-mount straight mounting feature and reliable switching performance in temperatures ranging from -40 to 85°C.
219-4MSTJRF
219-4MSTJRF by Cts is a DIP & SIP switch with POLYETHYLENE housing, GOLD plating, and BERYLLIUM COPPER contacts. It has 4 switch sections, SPST function, and operates b/w -55 to 85 °C. Ideal for OFF-ON applications with 2000 cycles electrical life and 1000000000 ohm insulation resistance.
5-2319764-9
TE Connectivity 5-2319764-9 is a PIANO DIP SWITCH with 8 switch sections, SPST function, and GOLD OVER NICKEL plating. Made of NYLON housing material, it has TAPE SEALED sealing for durability. Ideal for PANEL MOUNT applications with operating temperatures from -20 to 85 °C and max voltage of 24 V.
435640-2
Tyco Electronics Amp
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; Body Width: 9.65 inch; Manufacturer Series: 435640; Terminal Finish: Tin/Lead (Sn/Pb); Termination Type: SOLDER;
219-2MST
219-2MST by Cts is a DIP & SIP switch with POLYETHYLENE housing, GOLD plating, and BERYLLIUM COPPER contacts. It has 2000 cycles electrical life, 1000000000 ohm insulation resistance, and operates b/w -55 to 85 °C. Ideal for ON-OFF applications in electronics with a max DC rating of 0.1A@20VDC.
4-1571999-1
TE Connectivity 4-1571999-1 is a SPST Piano DIP switch with 2 sections, gold over nickel plating, and polyphenylene sulfide housing. It has an electrical life of 1000 cycles and operates b/w -30 to 85°C. Ideal for applications requiring momentary switch action in electronics.
A6TR-8104
Omron A6TR-8104 is an 8PST PIANO DIP SWITCH with gold terminal finish. It has a body width of 6in and operates b/w -20 to 70°C. Ideal for applications requiring momentary switch action, it offers a max DC contact voltage of 24V and current rating of 0.025A@24VDC.
A6SN-2101
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Electrical Life: 1000 Cycle(s); null: 300VAC; null: ON-OFF; Packing Method: TUBE;
ADF10ST
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: SPST; Sealing: TAPE SEALED; Manufacturer Series: AD; null: 10;
2-1825059-5
TE Connectivity 2-1825059-5 is a SPST slide DIP switch with 6 positions and 1000 cycles electrical life. Featuring polyphenylene sulfide housing, copper alloy terminals, and gold-plated center contacts, it operates b/w -30°C to 85°C. Ideal for panel mounting applications requiring a compact design and reliable switching performance.
219-4ESJ
The Cts 219-4ESJ is a DIP & SIP switch with POLYETHYLENE housing, GOLD plating, and BERYLLIUM COPPER contacts. It has 4 sections, SPST function, and operates b/w -55 to 85 °C. Ideal for ON-OFF applications in electronics due to its extended actuator type and latched switch action.
A6SN-6102-P
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: 300VAC; Electrical Life: 1000 Cycle(s); null: LATCHED; null: FLAT TYPE;
A6T-3102
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; null: LATCHED; Maximum Contact DC Rating (R Load): .025A@24VDC; Body Length/Diameter: 8.56 mm; Maximum Operating Temperature: 70 Cel;
A6H-6102
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Sealing: TAPE SEALED; null: 6; null: SLIDE DIP SWITCH; Maximum DC Contact Current: .025 A;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1825059-5
TE Connectivity's 1825059-5 is a DIP & SIP switch with SPST function, 1000 cycles electrical life, and 100M ohm insulation resistance. Ideal for applications requiring OFF-ON contact function, it features a slide type design with gold-plated center contacts and solder termination.
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Body Height: 3.5 mm; null: FLUSH TYPE; null: 2; Additional Features: APPROVAL: UL;
1825058-7
TE Connectivity 1825058-7 is a SPST slide DIP switch with 4 positions and extended actuator type. It features gold over nickel plating, copper alloy terminals, and polyphenylene sulfide housing material. Ideal for applications requiring off-on contact function in electronic devices.
1825057-3
TE Connectivity 1825057-3 is a SPST slide DIP switch with 4 positions. It features polyphenylene sulfide housing, copper alloy terminals, and gold over nickel plating. Ideal for applications requiring a latched switch action, such as in PCBs for consumer electronics.
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; Maximum Operating Temperature: 85 Cel; null: LATCHED; null: SPST; Body Width: 7.49 inch;
1825057-4
TE Connectivity's 1825057-4 is a SPST slide DIP switch with 5 positions and gold over nickel plating. Made of polyphenylene sulfide, it has an electrical life of 1000 cycles and operates b/w -30 to 85°C. Ideal for applications requiring through-hole mounting, such as consumer electronics and industrial control systems.
1825058-1
TE Connectivity 1825058-1 is a slide DIP switch with SPST function. It has gold over nickel plating, copper alloy terminals, and polyphenylene sulfide housing. With 1000 cycles electrical life, it's ideal for applications requiring off-on contact functions in electronic devices.
1825057-7
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; null: SLIDE DIP SWITCH; Terminal Finish: GOLD; Electrical Life: 1000 Cycle(s); Termination Type: SOLDER;
TE Connectivity 1825057-7 is a SPST slide DIP switch with 8 positions. It features gold over nickel plating, copper alloy terminals, and polyphenylene sulfide housing material. Ideal for applications requiring latched switch action, OFF-ON contact function, and through hole-right angle mounting.
1825057-5
TE Connectivity 1825057-5 is a SPST slide DIP switch with 6 positions, gold over nickel plating, and polyphenylene sulphide housing. It has a max DC contact current of 1A and is ideal for applications requiring OFF-ON contact function in electronic devices.
1825059-6
TE Connectivity 1825059-6 is a SPST slide DIP switch with 2 sections, white actuator, and polyphenylene sulphide housing. It has copper alloy terminals, nickel plating, and gold center contacts. With a max DC voltage of 24V and current of 0.1A, it is ideal for panel mounting applications requiring OFF-ON contact function.
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: SLIDE DIP SWITCH; null: OFF-ON; Termination Type: SOLDER; null: SOLVENT;
1825057-8
TE Connectivity 1825057-8 is a SPST slide DIP switch with 9 sections, gold over nickel plating, and polyphenylene sulfide housing. It has an electrical life of 1000 cycles and insulation resistance of 1G ohm. Ideal for applications requiring a latched switch action in PCB assemblies.
1825057-9
TE Connectivity's 1825057-9 is a SPST slide DIP switch with 10 positions and gold over nickel plating. With a max DC contact current of 1A, it is ideal for applications requiring reliable switching in temperatures ranging from -30 to 85°C. The switch features a polyphenylene sulphide housing material and copper alloy end contacts, making it durable and suitable for various electronic devices.
1825280-1
TE Connectivity's 1825280-1 is a Slide DIP Switch with SPDT function. It has an extended top actuator, sealed with epoxy for durability. With a max DC contact current of 0.1A@12VDC, it is ideal for panel mounting applications in electronics.
1825057-1
TE Connectivity's 1825057-1 is a SPST slide DIP switch with 2 sections, gold over nickel plating, and polyphenylene sulphide housing. With 1000 cycles electrical life, it operates b/w -30 to 85 °C and handles up to 1A AC/DC current. Ideal for applications requiring reliable switching in compact spaces.
1825059-1
TE Connectivity 1825059-1 is a SPST slide DIP switch with 2 sections, white actuator, and polyphenylene sulphide housing. It has copper alloy terminals, gold center contacts, and nickel plating. With 1000 cycles electrical life and -30 to 85°C operating temperature range, it's ideal for panel mounting applications requiring OFF-ON contact function at 24VDC/1A.
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: SLIDE DIP SWITCH; null: POLYAMIDE6T; End Contact Plating: GOLD; Contact Resistance: 100 mohm;
1825360-3
TE Connectivity 1825360-3 is a SPST slide DIP switch with 4 sections, white actuator, and polyphenylene sulphide housing. It has gold over nickel plating, copper alloy end contacts, and can handle up to 1A AC/DC current at 5V. Ideal for applications requiring reliable through-hole mounting in electronic devices.
1825360-5
TE Connectivity's 1825360-5 is a white DIP & SIP switch with 8 sections and SPST function. It has a body height of 3.5mm, max operating temperature of 85°C, and can handle a max AC contact current of 1A. This slide dip switch is commonly used in through-hole-right angle mounting applications.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved