Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
COMBINATION LINE CONNECTOR; Contact Gender: MALE; Termination Type: SOLDER; MIL Conformity: NO; Insulator Material: POLYAMIDE; IEC Conformity: NO;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Combination Line Connectors 2-172037-4 attributes and parameters. Explore more Combination Line Connectors devices from Tyco Electronics Amp
Additional Features:
Connector Type:
Contact Gender:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Manufacturer Series:
Mating Info.:
Mixed Contacts:
Mounting Type:
Termination Type:
Total No. of Contacts:
2-172037-4 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
SMBJ18CA
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
LL4148
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
BAV99
Infineon Technologies
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
2N2222A
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
MBR130T1G
Onsemi
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148WS
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Silicon Standard
International Semiconductor
NC7WZ17P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
DT04-3P
TE Connectivity
TE Connectivity's DT04-3P is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has a rated voltage of 250V, operating temperature range from -55 to 125 °C. Ideal for applications requiring a polarized, male contact style connector with crimp termination and strain relief mounting option.
12065425
Aptiv
The Aptiv 12065425 is a Combination Line Connector with dimensions of 1.661" x 1.118" x 1.024". It features POLYAMIDE66 insulator material, 10 contacts, and female contact gender. This connector is used for cable mounting applications requiring crimp termination.
DTP04-4P-P052
TE Connectivity's DTP04-4P-P052 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 200V and 25A, it operates b/w -55 to 125 °C. Ideal for panel mounting applications requiring a polarized male connector with UL certification.
DT04-6P-EP14
TE Connectivity's DT04-6P-EP14 is a 3-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring male contact gender and receptacle body style with strain relief option.
DT06-12SA-CE12
The TE Connectivity DT06-12SA-CE12 is a combination line connector with 12 contacts, rated for 250V and 13A. It features a body size of 1.701" x 0.82" x 1.597", suitable for applications requiring a max operating temperature of 125°C and min of -55°C. Ideal for cable mounting with UL certification and polarization key for secure connections.
DT04-12PA-CE03
TE Connectivity's DT04-12PA-CE03 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has 12 contacts, rated at 250V and 13A for signal current. With a temperature range of -55 to 125 °C, it is ideal for cable mounting applications requiring a polarized, UL-certified connector.
ATP04-4P-BLK
Amphenol
The Amphenol ATP04-4P-BLK is a 2-row combination line connector with polyethylene insulator, rated for 25A signal current. Operating from -55°C to 125°C, it has 4 contacts and uses crimp termination on cables. Ideal for applications requiring reliable male receptacle connectors with round pin sockets.
5055650201
Molex
Molex 5055650201 is a Combination Line Connector with Polyester insulator. Operating temp: -40 to 105°C. Features crimp termination, UL standard, ideal for cable mounting applications.
282764-1
TE Connectivity's 282764-1 is a Combination Line Connector with dimensions of 1.394" x 0.965" x 1.504". Rated for 24V, it has a max temp of 125°C and min of -30°C. With a rated current of 20A, it features polarized housing and is ideal for cable mounting applications.
UPCR012ALS1
UPCR012ALS1 by Amphenol is a Combination Line Connector with dimensions 3.02"x2.6"x1.34". It has a rated current of 400A, UL Flammability Code 94V-0, and operates b/w -40°C to 125°C. Ideal for applications requiring waterproof female connectors with screw termination on cable and panel mounting.
ATM04-08PA
The Amphenol ATM04-08PA is a male combination line connector with 8 contacts, rated for 7.5A signal current. It has a body size of 1.252" x 0.795" x 1.72", made of polyethylene, suitable for cable mounting applications in temperatures ranging from -55°C to 125°C.
DTM06-4S
DTM06-4S by TE Connectivity is a combination line connector with 4 contacts, rated at 250V and 7.5A. It features a glass-filled polyamide insulator material, operates b/w -55 to 125°C, and has a UL flammability code of 94V-0. Ideal for applications requiring a polarized housing and crimp termination in cable mounting setups.
DT06-4S-CE13
TE Connectivity's DT06-4S-CE13 is a 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, female contact style with strain relief option.
DTM04-2P-EP10
TE Connectivity's DTM04-2P-EP10 is a 1.68"x.651"x.638" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It features UL 94V-0 flammability code, polarized key, and supports 7.5A signal current. Ideal for cable mounting applications requiring a male receptacle contact style with strain relief option.
12015793
Aptiv's 12015793 is a POLYAMIDE COMBINATION LINE CONNECTOR with 3 FEMALE contacts for CABLE AND PANEL mounting. It mates with 12010717 and uses CRIMP termination. Ideal for automotive wiring harnesses due to its compact design and secure connections.
DTM04-2P-P007
TE Connectivity's DTM04-2P-P007 is a 2" x 0.651" x 1.473" combination line connector with GLASS FILLED POLYAMIDE insulator for -55 to 125 °C operation. Rated at 250V, it has UL 94V-0 flammability code and supports up to 7.5A signal current. Ideal for panel mounting applications requiring a polarized male receptacle connector with strain relief option.
776163-1
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: BRASS; IEC Conformity: NO; Mounting Type: BOARD AND PANEL;
DTP06-2S-E004
TE Connectivity's DTP06-2S-E004 is a 1.364" x 0.732" x 0.711" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 200V and -55 to 125°C. Featuring UL 94V-0 flammability code, it has a polarization key, female contact gender, and supports up to 25A signal current. Ideal for cable mounting applications requiring a polarized housing with strain relief.
68503-1602
68503-1602 by Molex is a Combination Line Connector with 16 contacts, 2 rows loaded. It has dimensions of 1.589" x 0.855" x 1.303" and uses polyester insulator material for commercial applications in cable mounting with crimp termination.
DTP04-4P
TE Connectivity's DTP04-4P is a 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 200V and 25A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, this male connector features UL certification and polarization key.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved