Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 34791-0040 is a Combination Line Connector with dimensions of 0.476" x 0.367" x 0.743". It has 4 contacts, made of POLYBUTYLENE TEREPHTHALATE. Ideal for cable mounting applications requiring crimp termination, featuring female contact gender in receptacle body style.
Median Price
$0.443
Lifecycle Status
Suppliers In-Stock
27
In-Stock Inventory
1k+
Heilind Electronics
1+ parts
$0.406
100+ parts
-
1k+ parts
$0.341
10k+ parts
$0.326
Interstate Connecting
$0.420
$0.368
$0.333
RS (Exports)
$0.440
Adafruit Industries
Verical
$0.460
Mouser Electronics
$0.870
$0.559
$0.483
$0.461
DigiKey
$0.603
$0.482
RS Americas
$0.880
$0.670
$0.540
Newark
$0.924
$0.652
$0.561
$0.542
Element14
$0.954
$0.720
$0.525
$0.465
Distrelec
$1.048
$0.699
$0.546
TTI
$0.330
TTI Europe
$0.313
Powell Electronics
$0.413
Master Electronics
$0.448
$0.438
Power & Signal
Chip1Stop
$0.249
Farnell
$0.377
PSC Electronics
Digiode
$0.273
Nova Conductors
$0.450
Q Components
IBS Electronics
$0.522
$0.493
Sensible Micro Corp
Vyrian
Cyclops Electronics Ltd
VNN
Semicontronic
$0.173
$0.169
$0.168
Corphita
$0.258
Advanced Electronics
Argo Parts USA
$0.447
$0.434
Netroflash
Continental Prestige Electronics
$0.812
$0.487
$0.391
Allen Electronics Distributors
$0.680
Andel Nordic
$2.187
$2.100
Aztec Data Supply Inc.
$6.542
Modulus Dynamics
$8.520
Perfect Parts
EMSNET (Excess)
Assy Fe
Kepictronics
S.R.D Solutions
Futuretech Components
Infinite Electronics LLP (Excess)
Robosynatics
$9.760
$9.561
Lucentia Tech
The compact body length allows for a snug fit in tight spaces, making this connector suitable for various applications with limited space.
The slim body width helps in reducing the overall size of the connector, making it ideal for applications where space is a constraint.
The moderate body depth provides enough room for secure contact connections while still maintaining a sleek and streamlined design.
Polybutylene terephthalate offers excellent electrical insulation properties, ensuring reliable and safe performance of the connector in various conditions.
Being a combination line connector, this product can accommodate multiple connections in a single unit, reducing the need for additional components and simplifying installation.
With four contacts available, this connector can support multiple communication or power connections, enhancing versatility and functionality.
The cable mounting type allows for easy and secure installation on various cable types, providing flexibility and convenience in connecting different devices.
Crimp termination offers a reliable and durable connection between the connector and wires, ensuring stable signal or power transmission.
The female contact gender enables compatibility with male connectors, facilitating seamless and secure connections in a wide range of applications.
The receptacle body style allows for easy insertion and removal of male connectors, enhancing usability and convenience during maintenance or upgrades.
Combination Line Connectors 34791-0040 attributes and parameters. Explore more Combination Line Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Type:
No. of Rows Loaded:
Option:
Termination Type:
Total No. of Contacts:
34791-0040 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Multiple Devices Design 31/Oct/2012 Mini50,4,8,12 Update 31/Oct/2012
PCN Assembly/Origin - Mult Devs Cancel Location Change 11/Jul/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
2N7002
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
LL4148
Rfe International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Motorola
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Panjit International
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
2N2222A
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
DT04-3P-CE03
TE Connectivity
TE Connectivity's DT04-3P-CE03 is a 3-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it operates b/w -55 to 125 °C and handles up to 13A signal current. Ideal for cable mounting applications requiring a polarized, UL-certified connector with strain relief option.
DT04-12PA-LE01
TE Connectivity's DT04-12PA-LE01 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it has 12 contacts and operates b/w -55 to 125 °C. Ideal for applications requiring a polarized, crimped male connector with strain relief on panel mounting.
SMS36SE4K9
Souriau
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Shell Material: GLASS FILLED POLYETHYLENE; Empty Shell: NO;
AT06-2S-GRN
Amphenol
The Amphenol AT06-2S-GRN is a combination line connector with 2 contacts, rated for 13A signal current. Featuring a body size of 0.713" x 0.591" x 1.126", it uses polyethylene insulator and operates b/w -55°C to 125°C. Ideal for cable mounting, this female plug connector with round pin sockets is suitable for various applications requiring reliable signal connections.
194320002
Molex
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Mating Contact Finish: NOT SPECIFIED; Filter Feature: NO;
DT06-6S-EP11
TE Connectivity's DT06-6S-EP11 is a 2-row, 6-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized, female plug with crimp termination and strain relief option.
2324808-3
TE Connectivity 2324808-3 is a Combination Line Connector with dimensions of 1.306" x 0.649" x 0.621". Rated for 12V, it operates b/w -40 to 125°C. Ideal for applications requiring a female connector with UL certification and signal current up to 14A.
9-966140-1
TE Connectivity's 9-966140-1 is a Combination Line Connector with 18 contacts, rated at 24V and UL flammability code of 94-HB. With a body length of 1.811" and width of 0.791", it operates b/w -40 to 100°C, suitable for panel mounting applications.
350778-1
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; IEC Conformity: NO; Empty Shell: YES;
12065287
Aptiv
Aptiv's 12065287 is a Combination Line Connector with TIN finish, POLYBUTYLENE TEREPHTHALATE insulator. Featuring 3 contacts, FEMALE gender, it is used for cable mounting applications in automotive industry.
DT04-08PA-E003
TE Connectivity's DT04-08PA-E003 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has a rated voltage of 250V, operating temperature range from -55 to 125 °C, and can handle up to 13A current. Ideal for cable mounting applications requiring a polarized male connector with strain relief option.
350715-1
TE Connectivity 350715-1 is a Combination Line Connector with dimensions 1.08"x0.55"x1.075". It has an insulation resistance of 1000000000 ohm, rated voltage of 600V, and operating temperature range from -55 to 105 °C. Ideal for cable mounting applications in commercial settings due to its durability and reliability certifications from CSA, UL, V standards.
282089-1
TE Connectivity's 282089-1 is a Combination Line Connector with 0.236" pitch, rated for 24V and 14A signal current. Featuring glass-filled polyamide construction, it offers high durability with 10 cycles and operates b/w -40 to 125°C. Ideal for cable mounting applications, this connector has a total of 5 contacts and female contact gender.
AT06-08SA
The Amphenol AT06-08SA is a 2-row combination line connector with 8 contacts, rated for 13A signal current. Its dimensions are 1.449" x 0.776" x 1.229", made of polyethylene, suitable for cable mounting applications. Operating temperature ranges from -55°C to 125°C, ideal for various electronic connections.
7282-1091
Yazaki
The Yazaki 7282-1091 is a Combination Line Connector with 49 contacts, made of POLYBUTYLENE TEREPHTHALATE. It features a male contact gender and mating info with 7283-1091. This connector is used in cable mounting applications for electrical connections.
929505-7
TE Connectivity's 929505-7 is a Combination Line Connector with dimensions of 2.51"x0.881"x1.02". It has 22 contacts, rated at 29A for signal current, and operates b/w -40°C to 130°C. Ideal for applications requiring a polarized male connector with panel mounting capabilities.
08T-JWPF-VSLE-D
J S T Mfg
08T-JWPF-VSLE-D by J S T Mfg is a waterproof combination line connector with 8 contacts. Made of POLYBUTYLENE TEREPHTHALATE, it has a UL Flammability Code of 94V-0. Ideal for cable mounting, this male crimp connector is suitable for various applications requiring secure and reliable connections.
3-1418469-1
TE Connectivity's 3-1418469-1 is a Combination Line Connector with dimensions of 1.693"x1.012"x1.23". Rated for 60V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator and operates b/w -40 to 140°C. With UL certification, it features 6 contacts at 0.118" spacing, ideal for cable mounting applications at up to 20A signal current.
DTM04-4P-E003
TE Connectivity's DTM04-4P-E003, a Combination Line Connector, features GLASS FILLED POLYAMIDE insulator material. With 4 contacts and rated voltage of 250V, it operates b/w -55 to 125 °C. Ideal for applications requiring a polarized connector with male contact gender and receptacle body style.
DT06-12SC-B016
TE Connectivity's DT06-12SC-B016 is a 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it has a max operating temp of 125°C and -55°C min. Ideal for applications requiring a polarized, UL-rated connector with 13A signal current capacity.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
34797-0401
Molex 34797-0401 is a 0.874" Combination Line Connector with 4 contacts, made of POLYBUTYLENE TEREPHTHALATE. It features CRIMP termination and BLADE PIN-SKT contact style, suitable for CABLE mounting applications.
34797-0202
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Depth: 1.417 inch; Body Width: .555 inch; Mating Contact Finish: NOT SPECIFIED;
34791-5141
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Additional Features: POALRIZED; Mating Contact Finish: NOT APPLICABLE;
34791-5140
Molex 34791-5140 is a COMBINATION LINE CONNECTOR with POLYBUTYLENE TEREPHTHALATE insulator. Featuring 4 contacts, it has FEMALE SQ PIN-SKT style for CABLE mounting via CRIMP termination. Ideal for various applications requiring reliable and secure electrical connections.
34791-5143
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: POLYBUTYLENE TEREPHTHALATE; Additional Features: POALRIZED; Termination Type: CRIMP;
34791-0041
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Body Width: .367 inch; No. of Rows Loaded: 1;
34791-5180
Molex 34791-5180 is a COMBINATION LINE CONNECTOR with POLYBUTYLENE TEREPHTHALATE insulator. It has 8 contacts, FEMALE gender, and SQ PIN-SKT style. Ideal for cable mounting with crimp termination, commonly used in receptacle applications.
34791-5181
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: CRIMP; Mixed Contacts: NO; No. of Rows Loaded: 1;
34797-0402
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Empty Shell: NO; Mounting Type: CABLE; Body Length: .874 inch;
34791-0042
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Contact Finish: NOT APPLICABLE; MIL Conformity: NO; No. of Rows Loaded: 1;
34791-0140
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Depth: .561 inch; Termination Contact Finish: NOT APPLICABLE; Total No. of Contacts: 4;
34791-0142
The Molex 34791-0142 is a Combination Line Connector with 0.476" x 0.3" x 0.561" dimensions. It features POLYBUTYLENE TEREPHTHALATE insulator material, 4 contacts, and FEMALE contact gender. Ideal for cable mounting applications requiring CRIMP termination with SQ PIN-SKT contact style.
34791-0143
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 1; Minimum Operating Temperature: -40 Cel; Contact Material: NOT SPECIFIED;
34791-0180
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 8; Body Depth: .743 inch; No. of Rows Loaded: 1;
34791-0181
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: NO; No. of Rows Loaded: 1; Contact Material: NOT SPECIFIED;
34791-0182
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE; Contact Material: NOT SPECIFIED; No. of Rows Loaded: 1;
34791-0141
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; Termination Type: CRIMP; Termination Contact Finish: NOT APPLICABLE;
34797-0405
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Style: BLADE PIN-SKT; Mounting Type: CABLE; Body Length: .874 inch;
34797-0407
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: RECEPTACLE; Mounting Type: CABLE; Total No. of Contacts: 4;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved