Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 34791-5180 is a COMBINATION LINE CONNECTOR with POLYBUTYLENE TEREPHTHALATE insulator. It has 8 contacts, FEMALE gender, and SQ PIN-SKT style. Ideal for cable mounting with crimp termination, commonly used in receptacle applications.
Median Price
$0.684
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$0.490
100+ parts
-
1k+ parts
10k+ parts
Chip1Stop
RS Americas
$0.740
Newark
$0.784
$0.768
Mouser Electronics
$0.890
$0.702
$0.668
$0.619
DigiKey
$1.240
$0.855
Verical
$0.750
$0.554
TTI
$0.564
$0.527
Master Electronics
$0.537
$0.528
Powell Electronics
$0.600
$0.560
TTI Europe
$0.523
Interstate Connecting
$0.641
Element14
$1.310
$0.970
$0.835
Digiode
$0.397
Vyrian
$0.418
TestEquity
$0.650
IBS Electronics
$0.438
TME
$0.717
$0.610
VNN
NAC Semi
$1.160
$1.070
Nova Conductors
Corphita
$0.376
Continental Prestige Electronics
$0.748
$0.543
Allen Electronics Distributors
Andel Nordic
$3.823
$3.670
Modulus Dynamics
$7.897
Perfect Parts
EMSNET (Excess)
Argo Parts USA
RC Electronics
$0.670
$0.630
$0.620
Aranea Global
Resion (Excess)
Polybutylene Terephthalate is known for its excellent mechanical properties, making it a durable and long-lasting insulator material for connectors.
A combination line connector allows for multiple connections in a single compact unit, reducing the need for multiple individual connectors.
With 8 contacts, this connector provides ample connectivity options for various applications that require multiple connections.
The cable mounting type offers a secure and reliable connection, suitable for applications where the connector needs to be attached to a cable.
Crimp termination ensures a strong bond between the connector and the cable, providing a reliable electrical connection.
Female contacts are commonly used in connectors and are known for their superior contact stability and reliability.
A receptacle shell style is easy to use and provides a secure fit for the connector, ensuring a stable connection.
The square pin socket contact style offers a secure and stable connection, suitable for various applications where reliable connectivity is essential.
Combination Line Connectors 34791-5180 attributes and parameters. Explore more Combination Line Connectors devices from Molex
Additional Features:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Empty Shell:
Filter Feature:
Insulator Material:
Mixed Contacts:
Mounting Type:
No. of Rows Loaded:
Option:
Termination Type:
Total No. of Contacts:
34791-5180 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Assembly/Origin - Mult Devs Assembly 06/Sep/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
SMBJ18CA
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Baneasa S A
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
2N2222A
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
1554216004
Molex
WIRE AND CABLE;
SS14
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
1N4148WT
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Yangzhou Yangjie Electronics
Sangdest Microelectronics (Nanjing)
Taitron Components
LM555CMX
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM555CM
LM107H
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Mde Semiconductor
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
DT04-12PA-L012
TE Connectivity
TE Connectivity's DT04-12PA-L012 is a 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for applications requiring a polarized male receptacle with strain relief mounting on panels.
DRC13-40PA-G002
TE Connectivity's DRC13-40PA-G002 is a 40-contact combination line connector with GLASS FILLED POLYAMIDE insulator. It has dimensions of 2.908" x 1.699" x 1.202" and operates b/w -55°C to 125°C. Ideal for board mounting, this male connector with receptacle body style suits various applications requiring reliable connections in demanding environments.
1-350780-1
TE Connectivity 1-350780-1 is a POLYAMIDE COMBINATION LINE CONNECTOR with 4 FEMALE contacts. It has UL 94V-0 flammability rating and mounts on PANEL. Ideal for automotive and industrial applications requiring reliable electrical connections.
12162197
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: SHROUDED; MIL Conformity: NO; Total No. of Contacts: 2;
ATP06-4S-RD01BK
Amphenol
The Amphenol ATP06-4S-RD01BK is a 2-row combination line connector with POLYETHYLENE insulator. It has 4 contacts, rated at 25A for signal current, and operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring a female contact gender and plug body style with round pin-socket contact design.
PL082X-301-10M8
AMPHENOL ICC
Combination Line Connectors;
DT04-2P-E005
TE Connectivity's DT04-2P-E005 is a 1.818" x 0.675" x 0.67" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It features UL 94V-0 flammability code, polarized key, and supports 13A signal current. Ideal for cable mounting applications requiring male contact gender and crimp termination with strain relief.
DT04-12PC-BE02
TE Connectivity's DT04-12PC-BE02 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring a male contact gender and receptacle body style with strain relief option.
194190011
Molex 194190011 is a COMBINATION LINE CONNECTOR with 6 contacts, MALE gender, and PLUG body style. It uses CRIMP termination on CABLE mounting. Ideal for automotive and industrial applications requiring reliable connectivity.
DT06-2S-EP06
TE Connectivity's DT06-2S-EP06 is a 1.228" x 0.591" x 0.621" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring UL 94V-0 flammability code, it has a polarized design, supports 13A signal current, and uses crimp termination for cable mounting applications.
AT04-12PA-SRGRY
The Amphenol AT04-12PA-SRGRY is a 2-row combination line connector with 12 contacts, rated for 13A signal current. Made of polyethylene, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this male receptacle connector features round pin sockets and compact dimensions of 1.598" x 0.874" x 2.476".
DRC22-40PA
TE Connectivity's DRC22-40PA is a 1.5"x2"x3.7" combination line connector with 40 contacts, rated at 250V and 7.5A for signal current. Made of POLYAMIDE, it operates b/w -55°C to 125°C and is ideal for cable mounting applications requiring polarization key and strain relief option.
DT15-6P-GP01
TE Connectivity's DT15-6P-GP01 is a 2-row combination line connector with dimensions of 1.555" x 1.685". Rated for 250V and 13A, it operates b/w -55°C to 125°C. Ideal for panel mounting applications, featuring solder termination and UL certification.
AT04-6P-PM11
The Amphenol AT04-6P-PM11 is a 2-row combination line connector with polyethylene insulator. It has 6 contacts, rated at 13A for signal current. Operating temperatures range from -55°C to 125°C, suitable for cable and panel mounting applications.
282105-1
TE Connectivity 282105-1 is a Combination Line Connector with dimensions of 1.016" x 0.543" x 1.654". Rated for 24V, it has GLASS FILLED POLYAMIDE insulator and operates b/w -40 to 125°C. Ideal for applications requiring a polarized connector with 3 contacts and a rated current of 14A.
15300027
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: COMPATIBLE CABLE: 12077413; 12129493; 12077939; 12103360; Manufacturer Series: 280; Mounting Type: CABLE;
AT04-12PA-RD01
The Amphenol AT04-12PA-RD01 is a Combination Line Connector with 12 contacts, rated at 13A. Featuring POLYETHYLENE insulator material, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a body size of 1.598" x 0.882" x 1.996".
1-1823640-1
TE Connectivity's 1-1823640-1 is a Combination Line Connector with GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator. It operates b/w -40 to 85°C, suitable for mains applications up to 115/230VAC. This polarized connector has a terminal pitch of 3.1mm and features an empty shell design.
HVSL800062A135
Amphenol's HVSL800062A135 is a 3.185" x 1.953" x 3.169" combination line connector with polyethylene insulator, rated for -40 to 125°C. It has UL94V-0 flammability code, supports 180A signal current, and features crimp termination for male contacts. Ideal for cable mounting applications per EN and UL standards.
282090-1
TE Connectivity's 282090-1 is a combination line connector with dimensions of 1.449" x 1.449" x 1.268". It has a rated voltage of 24V and can operate in temperatures ranging from -40°C to 125°C. This connector, made of glass-filled polyamide, is suitable for applications requiring a polarized housing and crimp termination.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
34797-0401
Molex 34797-0401 is a 0.874" Combination Line Connector with 4 contacts, made of POLYBUTYLENE TEREPHTHALATE. It features CRIMP termination and BLADE PIN-SKT contact style, suitable for CABLE mounting applications.
34797-0202
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Depth: 1.417 inch; Body Width: .555 inch; Mating Contact Finish: NOT SPECIFIED;
34791-0040
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: NOT SPECIFIED; Filter Feature: NO; MIL Conformity: NO;
34791-5141
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Additional Features: POALRIZED; Mating Contact Finish: NOT APPLICABLE;
34791-5140
Molex 34791-5140 is a COMBINATION LINE CONNECTOR with POLYBUTYLENE TEREPHTHALATE insulator. Featuring 4 contacts, it has FEMALE SQ PIN-SKT style for CABLE mounting via CRIMP termination. Ideal for various applications requiring reliable and secure electrical connections.
34791-5143
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: POLYBUTYLENE TEREPHTHALATE; Additional Features: POALRIZED; Termination Type: CRIMP;
34791-0041
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Body Width: .367 inch; No. of Rows Loaded: 1;
34791-5181
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: CRIMP; Mixed Contacts: NO; No. of Rows Loaded: 1;
34797-0402
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Empty Shell: NO; Mounting Type: CABLE; Body Length: .874 inch;
34791-0042
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Contact Finish: NOT APPLICABLE; MIL Conformity: NO; No. of Rows Loaded: 1;
34791-0140
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Depth: .561 inch; Termination Contact Finish: NOT APPLICABLE; Total No. of Contacts: 4;
34791-0142
The Molex 34791-0142 is a Combination Line Connector with 0.476" x 0.3" x 0.561" dimensions. It features POLYBUTYLENE TEREPHTHALATE insulator material, 4 contacts, and FEMALE contact gender. Ideal for cable mounting applications requiring CRIMP termination with SQ PIN-SKT contact style.
34791-0181
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: NO; No. of Rows Loaded: 1; Contact Material: NOT SPECIFIED;
34791-0182
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE; Contact Material: NOT SPECIFIED; No. of Rows Loaded: 1;
34791-0141
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; Termination Type: CRIMP; Termination Contact Finish: NOT APPLICABLE;
34791-5142
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: NOT APPLICABLE; Filter Feature: NO; Contact Style: SQ PIN-SKT;
34791-5182
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: NO; Body or Shell Style: RECEPTACLE; Mixed Contacts: NO;
34791-0020
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: CRIMP; Mixed Contacts: NO; Additional Features: MINI50, POLARIZED;
34791-0021
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Depth: .561 inch; Filter Feature: NO; Mixed Contacts: NO;
34791-0022
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: NOT APPLICABLE; Mixed Contacts: NO; Insulator Material: POLYBUTYLENE TEREPHTHALATE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved