Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
34822-0013 by Molex is a 4-row combination line connector with GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator. It has 66 contacts, rated at 25A for signal current, and operates b/w -40 to 125°C. Ideal for cable mounting applications requiring female SQ PIN-SKT contacts in a receptacle shell style.
Median Price
$13.120
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Sager
1+ parts
$7.380
100+ parts
-
1k+ parts
10k+ parts
Heilind Electronics
$8.030
$6.547
$6.448
Adafruit Industries
$12.403
Interstate Connecting
$12.616
$10.131
$9.979
Farnell
$12.810
$9.360
$9.240
Verical
$12.640
$8.450
Arrow
$13.486
TTI
$14.450
$7.030
$6.760
Mouser Electronics
$14.900
$11.200
$11.050
Newark
$15.200
$11.420
$11.340
RS (Exports)
$16.080
$12.380
RS Americas
$19.090
$14.700
$13.930
Element14
$21.150
$17.550
$16.110
Chip1Stop
$9.000
$6.870
TTI Europe
$7.810
PSC Electronics
Digiode
$7.011
Nova Conductors
$12.210
VNN
IBS Electronics
$12.459
$10.500
$8.996
Vyrian
Q Components
Andel Nordic
$4.906
$4.709
Semicontronic
$6.270
$6.113
$6.082
Corphita
$6.642
Modulus Dynamics
$9.909
Aztec Data Supply Inc.
$10.338
Netroflash
Advanced Electronics
Continental Prestige Electronics
$15.070
$10.310
Allen Electronics Distributors
$18.810
Authorized Procurement Solutions
Robosynatics
$8.808
$8.628
Lucentia Tech
Perfect Parts
Argo Parts USA
Resion (Excess)
EMSNET (Excess)
The longer body length allows for more room for the 4 rows of contacts, providing a higher contact density and more connectivity options.
The compact width of the body makes it suitable for tight spaces or applications where space is limited.
The depth of the body accommodates the multiple rows of contacts without compromising on the overall size of the connector.
The insulator material is durable, heat-resistant, and provides excellent electrical insulation, ensuring reliable performance in various environmental conditions.
Having 4 rows loaded allows for a high number of contacts and connections, making it versatile and suitable for complex electrical systems.
The high maximum operating temperature ensures that the connector can withstand elevated temperatures without overheating or degradation in performance.
The low minimum operating temperature enables the connector to function reliably in cold environments without risk of malfunction.
The specific design and functionality of a combination line connector allow for multiple types of connections in one unit, providing flexibility and efficiency in wiring setups.
The high rated current makes the connector suitable for handling heavy electrical loads, ensuring stable signal transmission.
With a high number of contacts, the connector offers ample connectivity options for various applications, making it versatile and adaptable.
The cable mounting type simplifies installation and maintenance, offering a secure and reliable connection between the connector and the cable.
The crimp termination type allows for a secure and efficient connection between the wires and contacts, ensuring good conductivity and mechanical strength.
The female contact gender is commonly used for receiving male connectors, providing compatibility with a wide range of devices and equipment.
The receptacle body style is versatile and allows for easy mating with various connector types, making it suitable for a range of applications.
The square pin socket contact style offers a reliable and secure connection with low contact resistance, ensuring efficient signal transmission.
Combination Line Connectors 34822-0013 attributes and parameters. Explore more Combination Line Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Empty Shell:
Filter Feature:
Insulator Material:
Mixed Contacts:
Mounting Type:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Rated Current - Signal:
Termination Type:
Total No. of Contacts:
34822-0013 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Assembly/Origin - Mult Devs Equipment Transfer 19/Dec/2023
PCN Other - Multiple Devices Shipping Location 20/Mar/2020
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
SS14
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
1N4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS123LT1G
Onsemi
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
LM555CMX
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM317LMX/NOPB
Texas Instruments
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
MBRA340T3G
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
Microsemi
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
Yangzhou Yangjie Electronics
ULN2803A
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
BAV99
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
5-2232263-3
TE Connectivity
TE Connectivity 5-2232263-3 is a Combination Line Connector with dimensions 1.083" x 0.687" x 0.589". Rated for 600V, it operates b/w -55°C to 140°C. Ideal for panel mounting applications, it features UL and VDE standards compliance.
194190012
Molex
Molex 194190012 is a COMBINATION LINE CONNECTOR with 6 contacts, MALE gender, and PLUG body. It uses CRIMP termination on CABLE mounting. Ideal for industrial machinery and automotive applications.
0-0350779-1
TE Connectivity 0-0350779-1 is a Combination Line Connector with dimensions of 1.051" x 0.58" x 1.079". It has an Insulation Resistance of 100MΩ, operating b/w -55°C to 105°C. Ideal for commercial applications, it features a male contact gender and crimp termination type for durability in cable mounting setups.
DT06-12SB-P012
TE Connectivity's DT06-12SB-P012 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has a rated voltage of 250V, operating temperature range from -55 to 125°C, and can handle up to 13A current. Ideal for cable mounting applications requiring a polarized, female plug with strain relief option.
2286003-3
TE Connectivity's 2286003-3 is a Combination Line Connector with dimensions of 1.244" x 0.591" x 0.622". It has a rated voltage of 48V, operating temperature range from -55 to 125°C, and UL flammability rating of 94V-0. Ideal for applications requiring a polarized connector with a signal current rating of 13A.
DTM04-12PA-E003
TE Connectivity's DTM04-12PA-E003 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has 12 contacts, rated at 7.5A and 250V, suitable for applications requiring a polarized, UL-rated connector with operating temperatures from -55 to 125°C.
DT04-08PA-E003
TE Connectivity's DT04-08PA-E003 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has a rated voltage of 250V, operating temperature range from -55 to 125 °C, and can handle up to 13A current. Ideal for cable mounting applications requiring a polarized male connector with strain relief option.
2377780-1
TE Connectivity's 2377780-1 is a Combination Line Connector with GLASS FILLED POLYAMIDE insulator. It features 4 loaded rows, operating from -40 to 120 °C, and FEMALE contact gender. Ideal for applications requiring a polarized connector with 115/230VAC mains rating and cable mounting type.
3-1971776-3
TE Connectivity 3-1971776-3 is a Combination Line Connector with dimensions of 0.854" x 0.988" x 0.902". Rated for 600V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator. Suitable for applications requiring a 115/230VAC mains connector rating and female crimp termination.
DF62W-3EP-2.2C
Hirose Electric
COMBINATION LINE CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
1-1718643-1
TE Connectivity 1-1718643-1 is a Combination Line Connector with POLYAMIDE insulator. It has 2 contacts, rated at 25A for signal current. Ideal for applications requiring polarized connectors in temperatures ranging from -40 to 130°C.
ATM06-2S-EC01
Amphenol
Amphenol's ATM06-2S-EC01 is a female plug combination line connector with 2 contacts, rated for 7.5A signal current. Made of polyethylene, it operates b/w -55°C to 125°C and is suitable for cable mounting applications.
1-480702-0
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; UL Flammability Code: 94V-2; Additional Features: MATE-N-LOK; Mounting Type: CABLE AND PANEL;
9-966140-2
TE Connectivity's 9-966140-2 is a Combination Line Connector with 15 contacts, rated at 24V. With a body length of 1.614" and width of 0.791", it operates b/w -40 to 100°C. Ideal for panel mounting applications, this connector features right angle mounting style and solder termination.
DT06-12SD-B016
TE Connectivity's DT06-12SD-B016 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it has a max operating temp of 125°C and -55°C min. Ideal for applications requiring a polarized, crimped female plug with strain relief, this UL-rated connector supports up to 13A signal current across its 12 contacts.
ATP06-4S-RD01BK
The Amphenol ATP06-4S-RD01BK is a 2-row combination line connector with POLYETHYLENE insulator. It has 4 contacts, rated at 25A for signal current, and operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring a female contact gender and plug body style with round pin-socket contact design.
DTM1312PA12PBGR01
TE Connectivity's DTM1312PA12PBGR01 is a Combination Line Connector with 24 contacts, rated voltage of 250V, and signal current of 7.5A. Ideal for board mounting applications, it has a temperature range from -55 to 125°C and UL flammability rating of 94V-0.
34062-0023
Molex 34062-0023 is a Combination Line Connector with 0.866"x.654"x1.268" dimensions, operating from -40 to 125°C. It has 2 contacts, glass-filled polyamide6 shell material, and crimp termination for cable mounting. Ideal for applications requiring female SQ pin-skt contact style in receptacle body design.
33482-4001
Molex 33482-4001 is a Combination Line Connector with dimensions of 0.887" x 0.875" x 2.144". It has 8 contacts, male gender, and blade pin-skt style. Suitable for cable mounting with crimp termination, this connector is used in various applications requiring reliable electrical connections.
SMS36SE3K9
Souriau-sunbank Connection Technologies
SMS36SE3K9 by Souriau-sunbank is a 36-contact combination line connector with UL 94V-0 flammability rating. Featuring glass-filled polyethylene shell, it has female solder contacts for board mounting. Ideal for applications requiring high-performance connectors in demanding environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
348292001
Molex 348292001 is a Combination Line Connector with 20 contacts in 2 loaded rows. Made of GLASS FILLED PBT, it's a male connector for board mounting via solder termination. Ideal for applications requiring reliable electrical connections in compact spaces.
34824-5126
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: POLYBUTYLENE TEREPHTHALATE; No. of Rows Loaded: 2; Mating Contact Finish: NOT APPLICABLE;
34825-0160
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: NOT APPLICABLE; Additional Features: POALRIZED; Contact Style: SQ PIN-SKT;
34825-0200
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Width: .479 inch; Contact Style: SQ PIN-SKT; Contact Material: NOT SPECIFIED;
34825-0125
34825-0125 by Molex is a 2-row combination line connector with 0.89"x.479"x.614" dimensions, 12 contacts, and male SQ pin-skt style. It operates b/w -40°C to 105°C, ideal for board mounting applications requiring solder termination in various industries.
34825-0124
34825-0124 by Molex is a combination line connector with dimensions of 0.89" x 0.479" x 0.614". It has 2 rows and can operate in temperatures ranging from -40°C to 105°C. With 12 contacts, it is suitable for board mounting and solder termination, featuring male SQ PIN-SKT contact style.
34824-0244
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Minimum Operating Temperature: -40 Cel; Mounting Type: CABLE; Body Width: .371 inch;
34824-5124
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Additional Features: POALRIZED; Filter Feature: NO;
34822-0033
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: POLARIZED; Body Width: 1.591 inch; Mating Contact Finish: NOT APPLICABLE;
34822-0043
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: NO; Total No. of Contacts: 66; Maximum Operating Temperature (Cel): 125;
34822-0023
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: NO; Termination Type: CRIMP; Mating Contact Finish: NOT APPLICABLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved