Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 34824-5124 is a Combination Line Connector with 12 contacts in 2 rows. It features POLYBUTYLENE TEREPHTHALATE insulator material, CRIMP termination type, and FEMALE contact gender. Ideal for cable mounting applications, this connector has a RECEPTACLE body style and SQ PIN-SKT contact style.
Median Price
$0.560
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Newark
1+ parts
$0.161
100+ parts
1k+ parts
10k+ parts
-
Mouser Electronics
$1.070
$0.771
$0.687
$0.564
DigiKey
$1.160
$0.803
$0.642
Verical
$0.691
$0.527
Master Electronics
$0.457
Farnell
$0.467
$0.416
$0.399
Element14
$0.797
$0.710
$0.703
Powell Electronics
TTI
$0.538
$0.515
$0.495
Interstate Connecting
$0.486
Vyrian
Digiode
$0.630
VNN
IBS Electronics
$0.631
$0.603
Nova Conductors
NAC Semi
$0.721
Corphita
$0.597
Continental Prestige Electronics
$0.742
$0.511
$0.459
Andel Nordic
$7.370
$7.075
Perfect Parts
EMSNET (Excess)
Authorized Procurement Solutions
Argo Parts USA
Aranea Global
Glotronic Ltd.
This material provides excellent durability and resistance to heat, making the connector suitable for various environments.
Having 2 rows loaded allows for more connections to be made in a single connector, increasing efficiency and reducing the need for additional connectors.
Being a combination line connector means it can handle multiple types of connections, providing versatility and flexibility in application.
With 12 contacts available, this connector can accommodate multiple connections in one unit, reducing the need for separate connectors and streamlining installations.
Designed for cable mounting, this connector is easy to install and can be quickly integrated into existing cable setups.
Crimp termination offers a secure and reliable connection method, ensuring stable performance over time.
The female gender allows for easy and secure mating with male connectors, providing a reliable and stable connection.
The receptacle design makes it easy to insert and remove plugs, enhancing usability and convenience.
The square pin socket contact style ensures a secure and stable connection, reducing the risk of signal loss or interference.
Combination Line Connectors 34824-5124 attributes and parameters. Explore more Combination Line Connectors devices from Molex
Additional Features:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Empty Shell:
Filter Feature:
Insulator Material:
Mixed Contacts:
Mounting Type:
No. of Rows Loaded:
Option:
Termination Type:
Total No. of Contacts:
34824-5124 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - 34824y12y Design 09/Jun/2020
PCN Assembly/Origin - Mult Devs Cancel Location Change 11/Jul/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Electronic Transistors
BAV99
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
LL4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
BAV99WT1G
Fairchild Semiconductor
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
Ksl Microdevices
FDLL4148
National Semiconductor
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
1N4148
Nexperia
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
1600280013
Molex
Molex 1600280013 is a Combination Line Connector with 32 contacts, SYNDIOTACTIC POLYSTYRENE insulator. It has dimensions of 1.293" x 0.775" x 1.079", suitable for cable mounting applications. Operating temperature range from -40°C to 85°C, making it ideal for various industrial uses.
776538-1
TE Connectivity
TE Connectivity's 776538-1 is a Combination Line Connector with dimensions of 1.126" x 1.872" x 1.049". Rated for 250V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator and operates b/w -40 to 125°C. With UL certification, it features 8 contacts, polarized keying, and male RND PIN-SKT contact style for cable mounting applications.
ATM06-2S-KIT01
Amphenol
Amphenol's ATM06-2S-KIT01 is a Combination Line Connector with POLYETHYLENE insulator. It has 2 contacts, rated at 7.5A for signal current, and operates b/w -55 to 125°C. Ideal for cable mounting applications requiring crimp termination with female contact gender.
DT04-12PA-BE03
TE Connectivity's DT04-12PA-BE03 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it has a max operating temp of 125°C and -55°C min. Ideal for applications requiring a polarized, crimped male connector with 12 contacts and UL94V-0 flammability rating.
12010975
Aptiv
Aptiv's 12010975 is a Combination Line Connector with dimensions of 2.173" x 0.685" x 1.87". It features POLYAMIDE insulator material, 6 contacts, and FEMALE contact gender. Ideal for cable mounting applications requiring CRIMP termination with RND PIN-SKT contact style.
172496-1
TE Connectivity's 172496-1 is a Combination Line Connector with dimensions of 0.945" x 1.181" x 0.74". Rated for 12V, it has UL Flammability Code 94V-2 and operates b/w -30 to 105 °C. Ideal for cable mounting applications, it features POLYAMIDE insulator material and a total of 9 contacts in a polarized housing.
ATM15-2P-BM03
The Amphenol ATM15-2P-BM03 is a combination line connector with 2 contacts, rated at 7.5A signal current. It features a POLYETHYLENE insulator and operates b/w -55°C to 125°C. Ideal for board mounting applications requiring reliable female connectors with SQ PIN-SKT contact style.
12010105
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 2; Empty Shell: NO; Mixed Contacts: NO;
33482-8601
The Molex 33482-8601 is a combination line connector with dimensions of 1.439" x 0.875" x 2.144". It has an insulator made of glass-filled polyamide/syndiotactic polystyrene and features 12 contacts in a male blade pin-skt style. This connector is commonly used for cable mounting applications requiring crimp termination.
DT06-2S-EP06
TE Connectivity's DT06-2S-EP06 is a 1.228" x 0.591" x 0.621" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring UL 94V-0 flammability code, it has a polarized design, supports 13A signal current, and uses crimp termination for cable mounting applications.
15476346
COMBINATION LINE CONNECTOR;
DTP06-2S-C015
TE Connectivity's DTP06-2S-C015 is a 1.364" x 0.732" x 0.711" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 200V and 25A. It features polarized housing, UL flammability code 94V-0, and operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring a female plug with round pin sockets and strain relief option.
AT04-4P-BLK
The Amphenol AT04-4P-BLK is a combination line connector with 2 rows, rated for 13A signal current. With a temperature range of -55 to 125°C, it features male contact gender and round pin/socket style. Ideal for cable mounting applications, mating with AT04-4S-BLK connectors.
1-770166-0
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; MIL Conformity: NO; Empty Shell: NO;
12047662
Aptiv's 12047662 Combination Line Connector features NYLON insulator, operating temp range -40 to 125 °C, and FEMALE contact gender. With a body size of 0.325" x 0.343" x 0.669", it is ideal for commercial applications requiring a reliable CRIMP termination type in cable mounting setups.
12065685
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; Empty Shell: NO; Termination Contact Finish: NOT APPLICABLE;
DT06-08SA
TE Connectivity's DT06-08SA is a 2-row, 8-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized, UL-rated connector with strain relief option.
AT06-6S-SR01BLK
Amphenol's AT06-6S-SR01BLK is a 2-row combination line connector with 6 contacts, rated for 13A signal current. Made of polyethylene, it operates b/w -55°C to 125°C. Ideal for cable mounting applications due to its compact body size of 1.028" x 0.815" x 1.724".
34797-0202
Molex 34797-0202 is a Combination Line Connector with 0.598" x 0.555" x 1.417" dimensions, made of POLYBUTYLENE TEREPHTHALATE. It has 2 contacts, male gender, blade pin-skt style, and is used for cable mounting with crimp termination.
54200206
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; No. of Rows Loaded: 1; Filter Feature: NO;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
348292001
Molex 348292001 is a Combination Line Connector with 20 contacts in 2 loaded rows. Made of GLASS FILLED PBT, it's a male connector for board mounting via solder termination. Ideal for applications requiring reliable electrical connections in compact spaces.
34822-0013
34822-0013 by Molex is a 4-row combination line connector with GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator. It has 66 contacts, rated at 25A for signal current, and operates b/w -40 to 125°C. Ideal for cable mounting applications requiring female SQ PIN-SKT contacts in a receptacle shell style.
34824-5126
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: POLYBUTYLENE TEREPHTHALATE; No. of Rows Loaded: 2; Mating Contact Finish: NOT APPLICABLE;
34825-0160
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: NOT APPLICABLE; Additional Features: POALRIZED; Contact Style: SQ PIN-SKT;
34825-0200
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Width: .479 inch; Contact Style: SQ PIN-SKT; Contact Material: NOT SPECIFIED;
34825-0125
34825-0125 by Molex is a 2-row combination line connector with 0.89"x.479"x.614" dimensions, 12 contacts, and male SQ pin-skt style. It operates b/w -40°C to 105°C, ideal for board mounting applications requiring solder termination in various industries.
34825-0124
34825-0124 by Molex is a combination line connector with dimensions of 0.89" x 0.479" x 0.614". It has 2 rows and can operate in temperatures ranging from -40°C to 105°C. With 12 contacts, it is suitable for board mounting and solder termination, featuring male SQ PIN-SKT contact style.
34824-0244
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Minimum Operating Temperature: -40 Cel; Mounting Type: CABLE; Body Width: .371 inch;
34824-2244
Molex 34824-2244 is a 24-contact combination line connector with glass-filled polyamide insulator. It features 2 loaded rows, female contact gender, and SQ pin-skt style. Ideal for cable mounting applications requiring crimp termination.
34824-2245
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT APPLICABLE; Total No. of Contacts: 24; Termination Type: CRIMP;
34824-2162
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Total No. of Contacts: 16; Body Length: .949 inch;
34824-1244
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Minimum Operating Temperature: -40 Cel; Mating Contact Finish: NOT APPLICABLE; Contact Style: SQ PIN-SKT;
34824-1246
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Maximum Operating Temperature (Cel): 105; Insulator Material: POLYAMIDE; Body Depth: .561 inch;
34824-0246
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Insulator Material: POLYAMIDE410; Minimum Operating Temperature: -40 Cel;
34824-2160
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: YES; Mixed Contacts: NO; Body Width: .367 inch;
34824-2200
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT APPLICABLE; Total No. of Contacts: 20; Filter Feature: NO;
34824-2246
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT APPLICABLE; Additional Features: POALRIZED; Termination Type: CRIMP;
34824-5125
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 12; Mixed Contacts: NO; Termination Type: CRIMP;
34824-0245
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: YES; No. of Rows Loaded: 2; Body or Shell Style: RECEPTACLE;
34822-0043
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: NO; Total No. of Contacts: 66; Maximum Operating Temperature (Cel): 125;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved