Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Variable Resistors 25VR100LFTR attributes and parameters. Explore more Variable Resistors devices from Tt Electronics Plc
Orientation (Actuator):
Type (Actuator):
Additional Features:
Construction:
Ganging Number:
JESD-609 Code:
Length (Lead):
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
25VR100LFTR Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
Our primary focus areas for growth and investment are in the end markets of healthcare, aerospace & defence, and automation & electrification which includes products that address resource scarcity, improve energy efficiency, support renewables and drive productivity, connectivity and health.
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
1N4148WS
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
SMBJ18CA
Thinking Electronic Industrial
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Itt Cannon
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Filter Feature: NO;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
General Semiconductor
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
LL4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Shenzhen Socay Electronics
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
M39029/56-351
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
1N4148WT
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS25-32.768KHZ-1-T
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
3362U-1-102LF
Bourns
Bourns 3362U-1-102LF is a linear trimmer resistor with 1000 ohm resistance, rated at 0.5W power dissipation. It operates b/w -55 to 125 °C and has a temperature coefficient of 100 ppm/°C. Ideal for PCB mounting applications due to its rectangular package shape and through-hole mounting type.
RRS250
Ohmite Manufacturing
The Ohmite RRS250 is a 500W wire wound potentiometer with a linear resistance law. It has a horizontal orientation and is panel mountable, making it suitable for chassis mounting applications. With a 325° angle of rotation, it offers precise control over resistance in various electronic systems.
PT10MV10-104A2020-S
Amphenol's PT10MV10-104A2020-S is a 100k ohm linear carbon potentiometer with 3 terminals. It operates b/w -25°C to 70°C, has a tolerance of 20%, and can handle up to 200V. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact package.
PVG5A202C03R00
Murata Manufacturing
PVG5A202C03R00 by Murata is a 2000 ohm linear trimmer resistor with 11 turns, operating voltage of 300V, and rated power dissipation of 0.25W. It has a temperature coefficient of 150 ppm/°C and is suitable for surface mount applications in various electronic circuits requiring precise resistance adjustments.
PT10LV10-103A2020-S
Amphenol's PT10LV10-103A2020-S is a 10000 ohm linear carbon potentiometer with 3 terminals. It has a tolerance of 20%, operates at voltages up to 200V, and can handle temperatures from -25 to 70 °C. Ideal for PCB mounting applications requiring precise resistance adjustments in compact spaces.
23ESB103MMF50NF
TE Connectivity
TE Connectivity's 23ESB103MMF50NF is a 10000 ohm logarithmic potentiometer with a circular package. It features a carbon film technology, 20% tolerance, and 0.4 W power dissipation. Ideal for applications requiring precise resistance adjustment in horizontal orientation.
RT100AS4R70KB
Vishay Intertechnology
Vishay Intertechnology's RT100AS4R70KB is a 4.7 ohm wire wound POTENTIOMETER with 10% tolerance, 100 W power dissipation, and 320°C max operating temp. Ideal for panel mount applications, it offers a wide resistance range and high voltage capability for precise control in various electronic circuits.
22AR10KLFTR
Tt Electronics Plc
22AR10KLFTR by Tt Electronics Plc is a CERMET variable resistor with a resistance of 10000 ohm, rated for temperatures b/w -50 to 125 °C. It features a linear law of resistance and operates at an angle of rotation up to 220°. Ideal for surface mount applications in electronic circuits requiring precise voltage adjustments with a tolerance of 20%.
25SR20KLF
25SR20KLF by Tt Electronics Plc is a CERMET variable resistor with a resistance of 20000 ohm, rated for temperatures b/w -55 to 125 °C. It features a linear law of resistance and is ideal for PCB mounting applications requiring precise voltage adjustments up to 300 V.
3364W-1-503E
Bourns 3364W-1-503E is a CERMET trimmer resistor with 50000 ohm resistance, linear law, and 25% tolerance. It is used in applications requiring precise resistance adjustments due to its screw actuator, SMT package style, and surface mounting type.
89PHR10K
89PHR10K by Tt Electronics Plc is a CERMET trimmer pot with 10000 ohm resistance, 20 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a rated power dissipation of 0.75 W. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
CCU1031-E
The Ohmite Manufacturing CCU1031-E is a 10000 ohm linear potentiometer with 6 lug terminals. It has a rated power dissipation of 2W and operates b/w -55°C to 120°C. Ideal for panel mounting applications, this circular package resistor features a horizontal actuator shaft and is commonly used in electronic circuits requiring precise resistance adjustments.
3386P-1-105LF
Bourns 3386P-1-105LF is a CERMET trimmer resistor with 1000000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It is used in PCB mount applications for temperature-sensitive circuits due to its linear resistance law and wide operating temperature range (-55 to 125 °C).
3299X-1-201LF
Bourns 3299X-1-201LF is a CERMET trimmer pot with 200 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a rated power dissipation of 0.5 W. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
3006P-1-103LF
Bourns 3006P-1-103LF is a linear trimmer pot with 10000 ohm resistance, 15 turns, and 10% tolerance. It operates b/w -55 to 125 °C and has a power dissipation of 0.75 W. Ideal for PCB mounting in applications requiring precise resistance adjustments within a temperature range.
RJS150E
The Ohmite RJS150E is a 150 ohm wire wound potentiometer with linear resistance law. It features a 50W power dissipation, 10% tolerance, and 300° rotation angle. Ideal for panel mount applications requiring precise resistance adjustment in a circular package with lug terminals.
3296Z-1-254LF
Bourns 3296Z-1-254LF is a CERMET multi-turn trimmer resistor with 250k ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a tolerance of 10%. Ideal for applications requiring precise voltage adjustments in electronic circuits.
TSM4ZJ102KR10
Vishay Intertechnology's TSM4ZJ102KR10 is a CERMET variable resistor with 1000 ohm resistance, 10% tolerance, and 3960° rotation angle. Ideal for SMT applications, it operates b/w -55 to 125 °C with a rated power of 0.25 W.
3224W-1-202E
The Bourns 3224W-1-202E is a CERMET trimmer resistor with 12 turns and linear resistance law. It has a resistance of 2000 ohm, rated power dissipation of 0.25 W, and operates b/w -65 to 150 °C. Ideal for applications requiring precise resistance adjustments in compact SMT packages.
T73YU103KT20
Vishay Intertechnology's T73YU103KT20 is a 10000 ohm linear trimmer resistor with 3 terminals. It has a rated power dissipation of 0.5W and operates b/w -55 to 125 °C. Ideal for PCB mounting, it features a screw actuator and is commonly used in applications requiring precise resistance adjustments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved