Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns 3299Y-1-100 is a CERMET trimmer pot with 10 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a rated power dissipation of 0.5 W. Ideal for PCB mount applications requiring precise voltage adjustments in a compact package.
Median Price
$2.277
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
VNN
Electronic Expediters
Prism Electronics
Argo Parts USA
Netroflash
Continental Prestige Electronics
$2.232
AZTECH Wire
$16.663
The small diameter of the leads allows for easy installation and connection in tight spaces.
Having 25 turns allows for precise adjustment of resistance, making it suitable for fine-tuning circuit parameters.
The rated temperature of 70 °C ensures stable performance in most operating conditions.
The vertical orientation of the actuator allows for easy adjustment and control.
Cermet technology provides high stability and reliability in variable resistors, making them ideal for critical applications.
The rectangular package design makes it easy to mount and integrate into various circuit configurations.
The linear law of resistance ensures a consistent and predictable change in resistance with the actuator movement.
Trimmer pot construction allows for precise adjustment of resistance values for optimal circuit performance.
The tube packing method ensures safe transportation and storage of the variable resistors.
The 10 ohm resistance value makes this variable resistor suitable for a wide range of electronic applications.
Having 3 terminals allows for easy connection and integration into circuit designs.
PCB mount package style makes it convenient to install and solder onto circuit boards.
Wire terminal shape provides a reliable connection and easy soldering onto circuit components.
With a maximum operating temperature of 125 °C, this variable resistor can withstand higher temperature environments.
The wide operating temperature range of -55 °C to 125 °C ensures versatility in various temperature conditions.
The temperature coefficient of 100 ppm/°C ensures stable resistance values over a wide temperature range.
The tin lead terminal finish provides good conductivity and solderability for reliable connections.
The length of the leads allows for easy installation and connection in different circuit setups.
The package height of 10.03 mm provides a compact form factor for space-constrained applications.
Trimmer resistor type allows for precise adjustment of resistance values for circuit tuning and calibration.
The screw type actuator enables fine adjustment and control of resistance values with ease.
The high operating voltage of 300 V ensures compatibility with a wide range of electronic systems.
A tolerance of 10 % provides accuracy in resistance values and ensures consistent performance.
The package length of 9.53 mm provides a compact and space-saving design for circuit integration.
Through hole mounting type allows for secure and stable installation on circuit boards.
With a rated power dissipation of 0.5 W, this variable resistor can handle moderate power loads without overheating.
The package width of 6.1 mm provides a compact form factor for easy integration into circuit designs.
The 9000° angle of rotation allows for precise adjustment and control of resistance values within a wide range.
Variable Resistors 3299Y-1-100 attributes and parameters. Explore more Variable Resistors devices from Bourns
Orientation (Actuator):
Type (Actuator):
Construction:
JESD-609 Code:
Diameter (Lead):
Length (Lead):
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
3299Y-1-100 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
SMBJ18CA
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0540T1G
Onsemi
MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.
Taiwan Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
Vishay Sprague
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99WT1G
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
1N4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
Crimson Semiconductor
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
BSS138
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358N
NXP Semiconductors
3203X103P
TE Connectivity
TE Connectivity's 3203X103P is a CERMET variable resistor with 10000 ohm resistance, 0.25% tolerance, and 210° rotation angle. Ideal for surface mount applications in electronic circuits due to its linear law of resistance and compact rectangular package measuring 3.4mm x 3.4mm x 2mm.
89PHR10KLFTB
Tt Electronics Plc
89PHR10KLFTB by Tt Electronics Plc is a CERMET TRIMMER resistor with 10000 ohm resistance, 10% tolerance, and 0.75 W power dissipation. It has a linear law of resistance and operates b/w -55 to 125 °C. Ideal for PCB mounting applications due to its compact size and through-hole mount compatibility.
3303W-3-203E
Bourns
The Bourns 3303W-3-203E is a CERMET trimmer pot with 20 turns and linear resistance law. It has a resistance of 20k ohm, operates b/w -40 to 125 °C, and offers a tolerance of 25%. Ideal for applications requiring precise voltage adjustments in compact SMT designs.
PTA4543-2010CIB104
Bourns PTA4543-2010CIB104 is a linear potentiometer with 100k ohm resistance, 20% tolerance, and 0.25W power dissipation. It has a slide actuator type, vertical orientation, and through-hole mounting style. Ideal for applications requiring precise voltage control in PCB-mounted devices.
23ESB104MMF50NF
TE Connectivity's 23ESB104MMF50NF is a 100k ohm logarithmic potentiometer with carbon film technology. It features a circular package, horizontal actuator, and shaft type actuator. Ideal for through hole mounting applications with a rated power dissipation of 0.4W.
3296W-1-103R
Bourns 3296W-1-103R is a CERMET multi-turn trimmer resistor with 10000 ohm resistance, 25 turns, and linear resistance law. It has a max operating temperature of 125°C and is suitable for applications requiring precise voltage adjustments in circuits with up to 300 V operating voltage.
PTL60-10G1-103B2
The Bourns PTL60-10G1-103B2 is a linear carbon potentiometer with a resistance of 10000 ohm. It has a rated temperature of 70°C and can be mounted through hole. This variable resistor is commonly used in PCB applications for precise voltage control.
RES250E
Ohmite Manufacturing
Ohmite Manufacturing's RES250E is a 250 ohm wire wound potentiometer with linear resistance law. It features a 12.5W power dissipation rating, 300° rotation angle, and panel mount package style. Ideal for applications requiring precise control of resistance in horizontal orientation.
3299P-1-101LF
Bourns 3299P-1-101LF is a CERMET trimmer pot with 100 ohm resistance, 25 turns, and linear resistance law. It has a rated power dissipation of 0.5 W and operates b/w -55 to 125 °C. Ideal for PCB mount applications requiring precise resistance adjustments in electronic circuits.
3266X-1-203LF
Bourns 3266X-1-203LF is a CERMET trimmer resistor with 12 turns, 20000 ohm resistance, and linear law. Ideal for applications requiring precise resistance adjustments in circuits with operating voltage up to 300V. Features multi-turn construction, -55 to 150 °C temperature range, and matte tin terminal finish.
3314J-2-103E
Bourns 3314J-2-103E is a CERMET trimmer resistor with 10000 ohm resistance, 20% tolerance, and 0.25 W power dissipation. It operates b/w -55 to 125 °C and has a linear law of resistance. Ideal for applications requiring precise voltage adjustments in compact SMT designs.
P16NM103KAB15
Vishay Intertechnology
Vishay Intertechnology's P16NM103KAB15 is a 10000 ohm CERMET potentiometer with linear resistance law. Operating voltage of 100 V, rated power dissipation of 1 W, and temperature coefficient of 150 ppm/°C make it ideal for panel mount applications requiring precise resistance control.
91A2A-B28-B15/B15L
Bourns 91A2A-B28-B15/B15L is a single turn potentiometer with 10000 ohm resistance, 20% tolerance, and 1W power dissipation. Constructed with conductive plastic technology, it has a temperature coefficient of 1000 ppm/°C. Ideal for PCB mount applications in environments ranging from -40 to 125 °C.
3362U-1-102LF
Bourns 3362U-1-102LF is a linear trimmer resistor with 1000 ohm resistance, rated at 0.5W power dissipation. It operates b/w -55 to 125 °C and has a temperature coefficient of 100 ppm/°C. Ideal for PCB mounting applications due to its rectangular package shape and through-hole mounting type.
RJS150
The Ohmite RJS150 is a 50W wire wound potentiometer with linear resistance law, 10% tolerance, and 300° rotation angle. Ideal for panel mount applications, it features a circular construction, horizontal actuator orientation, and chassis mounting capability.
3299Y-1-103LF
Bourns 3299Y-1-103LF is a CERMET trimmer pot with 10000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. Ideal for PCB mount applications, it operates b/w -55 to 125 °C with a linear law of resistance. Its screw actuator allows for precise adjustments in various electronic circuits.
3266W-1-104LF
Bourns 3266W-1-104LF is a CERMET trimmer resistor with 12 turns, 100k ohm resistance, and linear law. Ideal for applications requiring precise resistance adjustments in circuits with operating voltage up to 300V. Features include multi-turn construction, through-hole mounting, and temperature coefficient of 100 ppm/°C.
3314G-1-501E
Bourns 3314G-1-501E is a CERMET trimmer resistor with 500 ohm resistance, linear law, and 20% tolerance. It operates b/w -55 to 125 °C and has a power dissipation of 0.25 W. Ideal for applications requiring precise voltage adjustments in compact SMT designs.
6574S-1-502
Bourns 6574S-1-502 is a linear potentiometer with 5000 ohm resistance, 10% tolerance, and 2W power dissipation. It has a circular package, shaft actuator type, and operates b/w -40 to 125 °C. Ideal for servo mount applications requiring precise resistance adjustments in a panel-mount setup.
53C350
Honeywell Sensing And Control
The Honeywell Sensing And Control 53C350 is a circular package potentiometer with a linear resistance of 50 ohm. It has a max operating temperature of 120°C and is suitable for panel mounting applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3299W-1-103LF
Bourns 3299W-1-103LF is a CERMET trimmer pot with 10000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. Ideal for PCB mounting applications, it operates b/w -55 to 125 °C with a linear law of resistance. Its screw actuator allows for precise adjustments in various electronic circuits.
3299Z-1-502LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3299P-1-502LF
3299W-1-253LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 25000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3299W-1-203LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 20000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3299Y-1-200
Bourns 3299Y-1-200 is a CERMET trimmer pot with 25 turns, linear resistance law, and 20 ohm resistance. It operates b/w -55 to 125 °C and has a rated power dissipation of 0.5 W. Ideal for PCB mount applications requiring precise resistance adjustments in a compact package.
3299Y-1-254
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 250000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3299Z-1-503LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 50000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3299Y-1-102
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3299Y-1-201
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 200 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3299Y-1-202
The Bourns 3299Y-1-202 is a variable resistor with a resistance of 2000 ohm and a tolerance of 10%. It is commonly used in PCB mount applications and has a max operating temperature of 125 °C.
3299Y-1-203
3299Y-1-501
Bourns 3299Y-1-501 is a CERMET trimmer pot with 500 ohm resistance, 25 turns, and linear resistance law. It has a rated power dissipation of 0.5 W and operates at temperatures from -55 to 125 °C. Ideal for PCB mount applications requiring precise resistance adjustments.
3299Y-1-503
3299Y-1-504
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 500000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3299X-1-103LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3299X-1-204LF
Bourns 3299X-1-204LF is a CERMET trimmer pot with 200k ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a tolerance of 10%. Ideal for PCB mounting applications requiring precise resistance adjustments.
3299Y-1-101LF
Bourns 3299Y-1-101LF is a CERMET trimmer pot with 100 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a max voltage of 300 V. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
3299Y-1-105
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1000000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved