Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Toshiba's 2SK2865 is a N-CHANNEL FET with 600V DS Breakdown Voltage, ideal for SWITCHING applications. It features 8A IDM and 93mJ EAS, suitable for ENHANCEMENT MODE operation. The transistor has a max ID of 2A, 5 ohm RDS(on), and DRAIN case connection in RECTANGULAR package style.
Median Price
-
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
ComSIT Distribution GmbH
1+ parts
100+ parts
1k+ parts
10k+ parts
Zilex Electronics Inc.
Chip Stock
VNN
EMSNET
ACDS - Activité Composants Distribution Service
Nova Conductors
LittleDiode
Ampacity Inc.
$29.050
Kepictronics
Argo Parts USA
Continental Prestige Electronics
Aranea Global
Provides good insulation and protection for the transistor, ensuring reliability and longevity.
Offers efficient conduction and switching capabilities, making it suitable for a wide range of applications.
Simplifies circuit design by integrating a diode, saving space and reducing component count.
Designed for fast switching operations, ideal for applications that require quick response times.
Can handle high voltages, making it suitable for high-power applications.
Compact design allows for easy mounting and integration into circuit boards.
Provides secure connections and ease of soldering during assembly.
Allows for precise control of the transistor's conductivity, enhancing overall performance.
Capable of handling high current pulses, suitable for demanding applications.
Can withstand energy spikes, offering reliability in harsh operating conditions.
Simplified connection setup, reducing complexity in circuit layout.
Facilitates easy mounting and connection in a linear arrangement for organized circuit layouts.
Offers good performance and reliability in various applications, making it a versatile choice.
Provides good thermal properties and efficiency, ensuring stable performance over a wide temperature range.
Ensures good conductivity and solderability, improving the overall reliability of connections.
Suitable for moderate power applications, offering a balance between performance and efficiency.
Low on-resistance allows for efficient current flow, minimizing power losses and improving overall efficiency.
Simplified layout and connectivity, reducing complexity in circuit design.
Provides a secure connection point for the drain terminal, ensuring stable operation.
Power Field Effect Transistors (FET) 2SK2865 attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Toshiba
Avalanche Energy Rating (EAS):
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JESD-30 Code:
JESD-609 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Maximum Pulsed Drain Current (IDM):
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
2SK2865 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
TOSHIBA, is a Japanese multinational conglomerate corporation headquartered in Minato, Tokyo, Japan. Its diversified products and services include power, industrial and social infrastructure systems, elevators and escalators, electronic components, semiconductors, hard disk drives (HDD), printers, batteries, lighting, as well as IT solutions such as quantum cryptography which has been in development at Cambridge Research Laboratory, Toshiba Europe, located in the United Kingdom, now being commercialised.It was one of the biggest manufacturers of personal computers, consumer electronics, home appliances, and medical equipment. As a semiconductor company and the inventor of flash memory, Toshiba had been one of the top 10 in the chip industry until its flash memory unit was spun off as Toshiba Memory, later Kioxia, in the late 2010s.
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
1N4148
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
General Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
M39029/58360
Esterline Technologies
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
Texas Instruments
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
EU2B-YS303C
Idec
ROTARY SWITCH;
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
FDC5614P
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
IRF7759L2TRPBF
International Rectifier
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 125 W; Package Shape: RECTANGULAR; No. of Elements: 1;
IRF640
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Minimum DS Breakdown Voltage: 200 V; JESD-30 Code: R-PSFM-T3; Package Body Material: PLASTIC/EPOXY;
MSC035SMA170B
Microchip Technology
Power Field-Effect Transistors;
2N7002BKW,115
NXP Semiconductors
2N7002BKW,115 by NXP Semiconductors is an N-CHANNEL FET with a max drain current of 0.31A and power dissipation of 0.88W. It operates in enhancement mode, suitable for applications requiring a single configuration such as power management systems or voltage regulators.
BSC011N03LSTATMA1
Infineon Technologies
Infineon's BSC011N03LSTATMA1 is a N-CHANNEL FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 400A IDM, 0.0014 ohm RDS(on), and 190mJ EAS. Its small outline package and DUAL terminals make it suitable for high-power ENHANCEMENT MODE operations.
IRFZ44NSTRL
International Rectifier Hirel Products
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-263AB; Qualification: Not Qualified; Package Shape: RECTANGULAR;
FDML7610S
Fairchild Semiconductor
N-CHANNEL; Configuration: SERIES, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.2 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
IRFZ44NS
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 55 V; Terminal Form: GULL WING; No. of Terminals: 2;
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
DN3535N8-G
DN3535N8-G by Microchip Technology is a N-CHANNEL FET with 0.5A IDM, 1.6W Abs Pd, and 10ohm RDS(on). Ideal for switching applications in small outline packages, operating from -55 to 150°C.
IRLML6401TRPBF
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
IXTA96P085T
Littelfuse
The Littelfuse IXTA96P085T is a P-CHANNEL FET with 85V DS breakdown voltage and 96A max drain current. Ideal for switching applications, it features a built-in diode, 300A pulsed drain current, and 0.013 ohm max on resistance. Suitable for enhancement mode operation in high-power systems with an operating temperature range of -55 to 150°C.
SQ2318AES-T1_GE3
Vishay Intertechnology
Vishay Intertechnology's SQ2318AES-T1_GE3 is a N-CHANNEL Power FET with 40V DS Breakdown Voltage and 32A IDM. Ideal for applications requiring high current handling capabilities, such as power supplies and motor control systems. Features include 8A ID, 0.031ohm RDS(on), and 46pF Crss for efficient performance in various electronic devices.
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
FDB52N20TM
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 357 W; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Position: SINGLE;
IRF640STRLPBF
Vishay Intertechnology's IRF640STRLPBF is a N-CHANNEL Power FET with 200V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 72A IDM, 580mJ EAS, and 0.18 ohm RDS(on). With a max power dissipation of 130W and operating temperature up to 175°C, it suits various high-power electronic designs.
IRFH5004TRPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 250 W; Package Body Material: PLASTIC/EPOXY; Terminal Position: DUAL;
CSD19534Q5AT
CSD19534Q5AT by Texas Instruments is a N-CHANNEL Power FET with 100V DS Breakdown Voltage. It is used for switching applications, has a max IDM of 137A and an EAS rating of 55mJ.
FDS8949_F085
FDS8949_F085 by Fairchild Semiconductor is a N-CHANNEL Power FET for SWITCHING applications. Features include 40V DS Breakdown Voltage, 20A IDM, and 0.029 ohm RDS(on). With a max power dissipation of 2W and operating temperature up to 150°C, it's ideal for high-performance electronic devices requiring efficient power management in compact designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
2SK2586
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 125 W; Maximum Operating Temperature: 150 Cel; Maximum Drain Current (Abs) (ID): 60 A;
Hitachi
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 125 W; JESD-30 Code: R-PSFM-T3; Package Shape: RECTANGULAR;
Renesas Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Maximum Drain Current (ID): 60 A;
2SK2225-E
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 50 W; Maximum Drain Current (Abs) (ID): 2 A; Package Body Material: PLASTIC/EPOXY;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 50 W; JESD-609 Code: e2; Terminal Form: THROUGH-HOLE;
2SK2564
Shindengen Electric Manufacturing
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 50 W; Package Body Material: PLASTIC/EPOXY; JESD-609 Code: e0;
2SK2586-E
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 125 W; JESD-30 Code: R-PSFM-T3; Package Shape: RECTANGULAR;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 125 W; Case Connection: DRAIN; JESD-609 Code: e2;
2SK2225-80-E#T2
The Renesas Electronics 2SK2225-80-E#T2 is a N-channel Power FET with a min DS breakdown voltage of 1500V. It has a max pulsed drain current of 7A and max drain current of 2A, making it suitable for switching applications. The transistor features a single configuration with built-in diode in a rectangular package style for flange mount installation.
2SK2613
Toshiba
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 150 W; JESD-609 Code: e0; Transistor Application: SWITCHING;
2SK2613(F)
2SK2613(F) by Toshiba is an N-CHANNEL power FET with a max drain current of 8A and a max power dissipation of 150W. It operates in enhancement mode and uses metal-oxide semiconductor technology. It is suitable for applications requiring high current and power handling capabilities.
2SK2223-01R
Fuji Electric
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 80 W; Terminal Form: THROUGH-HOLE; Package Body Material: PLASTIC/EPOXY;
Collmer Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; No. of Elements: 1; Terminal Position: SINGLE; Maximum Drain Current (ID): 10 A;
2SK2009(TE85L,F)
Toshiba's 2SK2009(TE85L,F) is an N-CHANNEL FET with a max drain current of 0.2A and power dissipation of 0.2W. Ideal for applications requiring low power consumption, such as in portable electronic devices or battery-operated equipment due to its single configuration and surface mount capability. Operating at a max temperature of 150°C, it utilizes metal-oxide semiconductor technology for enhanced performance.
2SK2313(F)
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 150 W; Maximum Operating Temperature: 150 Cel; Maximum Drain Current (ID): 60 A;
2SK2700
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Package Style (Meter): FLANGE MOUNT; Maximum Pulsed Drain Current (IDM): 9 A; Minimum DS Breakdown Voltage: 900 V;
2SK2718
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 40 W; Avalanche Energy Rating (EAS): 216 mJ; Minimum DS Breakdown Voltage: 900 V;
2SK2013
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 25 W; Maximum Operating Temperature: 150 Cel; Maximum Power Dissipation Ambient: 25 W;
2SK2601
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 125 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Terminal Form: THROUGH-HOLE;
2SK2874-01L
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Terminal Position: SINGLE; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved