Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SNC54LS326J by Texas Instruments is a TTL technology oscillator with 16 terminals, operating at 5V. It has MIL-STD-883 Class B screening and can function in temperatures ranging from -55°C to 125°C. Ideal for applications requiring reliable oscillation in harsh environments.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
One Stop Electronics
$0.010
Semicontronic
$1.010
$0.985
$0.980
Parana Technologies
$2.342
$217.452
$2.107
DigiPath Technology Company
$2.578
$2.372
IDEA Electronic Components Group
$2.631
$2.368
ChromeModa Solutions
$2.157
Ampacity Inc.
$5.010
AZTECH Wire
$6.259
Corphita
Corohmni
Ceramic material provides excellent thermal properties, making this oscillator suitable for applications where temperature fluctuations may occur.
This screening level ensures high reliability and quality standards, making this oscillator ideal for critical and demanding environments.
TTL technology offers fast switching speeds and low power consumption, making this oscillator efficient and reliable for various electronic applications.
Operating at a standard 5 V supply voltage, this oscillator is compatible with many existing systems and designs.
With 16 terminals, this oscillator allows for versatile connectivity options, enabling easy integration into different circuit configurations.
Capable of operating at high temperatures up to 125°C, this oscillator is suitable for use in industrial and automotive applications.
With a minimum operating temperature of -55°C, this oscillator can withstand extremely low temperatures, enhancing its versatility for various environments.
The through-hole mounting feature provides secure and reliable installation, making this oscillator easy to integrate into PCBs and electronic assemblies.
Other Function Oscillators SNC54LS326J attributes and parameters. Explore more Other Function Oscillators devices from Texas Instruments
Mounting Feature:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
Qualification:
Screening Level:
Sub-Category:
Nominal Supply Voltage:
Technology:
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
BAV99
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Weitronic Enterprise
MBRA340T3G
Onsemi
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Transistor & Electronic
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
TM4C1294NCPDTI3
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
SS14
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
1N4148WS
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
510KCA25M0000BAGR
Silicon Labs
Silicon Labs' 510KCA25M0000BAGR is a ceramic package oscillator with a nominal operating frequency of 25 MHz. It operates at a supply voltage of 1.8V and has a max operating temperature of 85°C. This oscillator is suitable for surface mount applications requiring precise timing.
SCR050TFTC3-065.5360/000.0500
Diodes Incorporated
Other Oscillators;
ST1300BMAS-28.6363(T)
Other Oscillators; Mounting Feature: SURFACE MOUNT; No. of Terminals: 14; Qualification: Not Qualified; Maximum Operating Frequency: 28.6363 MHz; Minimum Operating Frequency: 1.5 MHz;
S1903H-66.0000
Other Oscillators; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Maximum Operating Frequency: 125 MHz; Maximum Supply Current: 35 mA; Nominal Supply Voltage: 3.3 V;
PCF2120TK/1
PCF2120TK/1 by NXP Semiconductors is a CMOS oscillator designed for precision timing applications. It operates at a nominal frequency of 0.032 MHz, with a supply voltage range of 2-5V and an ultra-low current draw of just 1.7 µA. This surface-mount device functions effectively in extreme temperatures from -40 °C to 85 °C.
S6CC7SSVC-30.0000
SM5520TEV-80.0M
Pletronics
HMC512LP5ERTR
Analog Devices
HMC512LP5ERTR by Analog Devices is a GAAS technology oscillator with 32 terminals, operating at frequencies b/w 9600-10800 MHz. It has a supply voltage of 5V and max current draw of 370mA. Ideal for applications requiring precise frequency generation in temperature ranges from -40 to 85°C.
SCR050SEACA-065.5360/032.7680
S1562GABL-155.5200
Other Oscillators; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 6; Maximum Operating Frequency: 155.52 MHz; Technology: HYBRID; Package Body Material: METAL;
510KBA33M3300BAG
The Silicon Labs 510KBA33M3300BAG is a ceramic oscillator with a nominal operating frequency of 33.33 MHz and a max of 212.5 MHz. It operates at a supply voltage of 1.8V, suitable for applications requiring precise timing such as communication systems and industrial automation due to its wide temperature range from -40°C to 85°C.
T625_VC02_W
Infineon Technologies
Other Oscillators; No. of Terminals: 9; Nominal Operating Frequency: 77000 MHz; Maximum Supply Current: 16 mA; Nominal Supply Voltage: 3.5 V; Minimum Operating Frequency: 76000 MHz;
KD3270031
Diodes Incorporated KD3270031 is a ceramic package oscillator with 4 terminals, operating at 3.3V and 0.5mA supply current. It has a frequency of 0.032768 MHz, suitable for surface mount applications in temperatures ranging from -40°C to 85°C.
SN74LS326NP1
SN74LS326NP1 by Texas Instruments is a TTL technology oscillator with 16 terminals and a 5V supply voltage. It operates b/w 0°C to 70°C, featuring a plastic/epoxy body suitable for through-hole mounting. Ideal for applications requiring precise timing functions in various electronic circuits.
SMO1077N
SMO1077N by Onsemi is a metal-packaged oscillator with 10750 MHz frequency, 5V supply voltage, and 50mA max current. Ideal for applications requiring high-frequency oscillation in electronic circuits.
SN74LS627JP4
SN74LS627JP4 by Texas Instruments is a TTL technology oscillator with 14 terminals and a 5V supply voltage. It operates b/w 0°C to 70°C, housed in a ceramic package for through-hole mounting. Ideal for applications requiring precise timing functions in various electronic circuits.
S7C78SSVA-10.0000
SN74LS326JP4
SN74LS326JP4 by Texas Instruments is a TTL technology oscillator with 16 terminals and a 5V supply voltage. It operates b/w 0°C to 70°C, housed in a ceramic package for through-hole mounting. Ideal for applications requiring precise timing functions in various electronic circuits.
SN74LS320J4
S6CA1SS-30.0000
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
SNC54LS124W
Other Oscillators; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: CERAMIC; Package Equivalence Code: FL16,.3; Qualification: Not Qualified;
SNC54LS124J
Other Oscillators; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 16; Technology: TTL; Qualification: Not Qualified; Nominal Supply Voltage: 5 V;
SNC54LS627J
Other Oscillators; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 14; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 125 Cel; Technology: TTL;
SNC54LS321J
SNC54LS327J
Other Oscillators; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 14; Screening Level: MIL-STD-883 Class B (Modified); Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel;
SNC54LS626J
SNC54LS627W
Other Oscillators; Mounting Feature: SURFACE MOUNT; No. of Terminals: 14; Qualification: Not Qualified; Screening Level: MIL-STD-883 Class B (Modified); Maximum Operating Temperature: 125 Cel;
SNC54LS321W
Other Oscillators; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Equivalence Code: FL16,.3; Power Supplies (V): 5; Package Body Material: CERAMIC;
SNC54LS327W
Other Oscillators; Mounting Feature: SURFACE MOUNT; No. of Terminals: 14; Qualification: Not Qualified; Nominal Supply Voltage: 5 V; Power Supplies (V): 5;
SNC54LS624J
Other Oscillators; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 14; Maximum Operating Temperature: 125 Cel; Qualification: Not Qualified; Nominal Supply Voltage: 5 V;
SNC54LS625W
SNC54LS325W
SNC54LS626W
Other Oscillators; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel; Nominal Supply Voltage: 5 V;
SNC54LS320W
Other Oscillators; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Power Supplies (V): 5; Maximum Operating Temperature: 125 Cel; Nominal Supply Voltage: 5 V;
SNC54LS326W
SNC54LS624W
Other Oscillators; Mounting Feature: SURFACE MOUNT; No. of Terminals: 14; Power Supplies (V): 5; Nominal Supply Voltage: 5 V; Technology: TTL;
SNC54LS320J
Other Oscillators; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 16; Screening Level: MIL-STD-883 Class B (Modified); Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
SNC54LS325J
Other Oscillators; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 16; Power Supplies (V): 5; Package Body Material: CERAMIC; Maximum Operating Temperature: 125 Cel;
SNC54LS625J
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved