Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PTLV9001IDBVR by Texas Instruments is a CMOS Operational Amplifier with 5 terminals and a supply voltage of 5V. It offers a max input offset voltage of 2000uV, common mode reject ratio of 77dB, and unity gain bandwidth of 1000kHz. Ideal for automotive applications due to its low profile package shape and wide operating temperature range from -40°C to 125°C.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Nova Conductors
One Stop Electronics
$0.410
Semicontronic
$4.410
$4.300
$4.278
Advanced Electronics
$4.531
$4.304
Parana Technologies
$6.085
$6.861
Corohmni
$6.219
Ampacity Inc.
$6.410
ChromeModa Solutions
$6.837
$5.606
IDEA Electronic Components Group
$6.153
AZTECH Wire
$18.031
Argo Parts USA
Continental Prestige Electronics
Corphita
DigiPath Technology Company
$6.164
Bastille Electronics
PLASTIC/EPOXY - Provides durability and protection for the internal components, making it a reliable choice.
2000 uV - Low input offset voltage ensures accuracy and precision in signal amplification.
YES - Easy to mount on circuit boards, saving space and simplifying the assembly process.
RECTANGULAR - Compact design allows for efficient use of space in electronic devices.
77 dB - High rejection ratio minimizes interference from common mode signals, ensuring clean output.
5 - Works well within typical supply voltage ranges, suitable for a wide range of applications.
5 - Simplified connectivity for easy integration into circuits.
SMALL OUTLINE, LOW PROFILE, SHRINK PITCH - Streamlined package design enhances space efficiency and ease of installation.
6 V - Ensures safe operation within specified voltage limits, preventing damage to the device.
125 °C - Can withstand high temperatures, suitable for demanding environments.
40 °C - Can operate in cold temperatures, providing versatility for various applications.
DUAL - Dual terminal design offers flexibility in circuit connection configurations.
1.45 mm - Low profile design allows for compact PCB layout and fitment in tight spaces.
1.6 mm - Slim width enables the op amp to be placed in narrow areas within electronic devices.
2.9 mm - Compact length optimizes space utilization on the circuit board.
AUTOMOTIVE - Suitable for automotive applications, designed to withstand harsh conditions.
1000 kHz - High bandwidth allows for efficient signal amplification across a wide range of frequencies.
CMOS - CMOS technology offers low power consumption and high performance in signal amplification.
GULL WING - Gull wing terminals provide secure solder connections for reliable operation.
OPERATIONAL AMPLIFIER - Ideal for various signal processing applications due to its high gain and input impedance.
2 V/us - Slow rate ensures stable and controlled response in signal amplification.
0.95 mm - Narrow terminal pitch allows for precise placement on the circuit board, reducing the risk of short circuits.
Operational Amplifiers (Op Amps) PTLV9001IDBVR attributes and parameters. Explore more Operational Amplifiers (Op Amps) devices from Texas Instruments
Amplifier Type:
Technology:
Total Functions:
Sub-Category:
Nominal Unity Gain Bandwidth:
Nominal Common Mode Rejection Ratio (CMRR ):
Input Offset Voltage Limit:
Nominal Slew Rate:
Nominal Supply Voltage:
Maximum Supply Voltage:
Lowest Operating Temperature:
Maximum Operating Temperature:
Length:
Width:
Maximum Seated Height:
Total Terminals:
Terminal Pitch:
Terminal Position:
Terminal Form:
Package Body Material:
Surface Mount:
Temperature Grade:
JESD-30 Code:
Package Code:
Package Shape:
Package Style:
PTLV9001IDBVR Amplifiers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
BAV99
MICRODIODE ELECTRONICS SHENZHEN CO LTD
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
SS14
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
1N4148WS
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
EU2B-YS3203F
Idec
ROTARY SWITCH;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
LL4148-GS08
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
LAN8720A-CP-TR
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SBAV99LT1G
Onsemi
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
MCP6002-I/SN
MCP6002-I/SN by Microchip Technology is a CMOS Operational Amplifier with 2 functions, Vsup of 5V, and Unity Gain Bandwidth of 1kHz. It is used in industrial applications for low-bias micropower amplification due to its high Common Mode Reject Ratio and Voltage-Feedback architecture.
LM258DR2G
LM258DR2G by Onsemi is a dual operational amplifier with 5000uV max input offset voltage and 85dB nominal CMRR. Ideal for applications requiring low bias current, it operates at -25 to 85 °C with a supply voltage of +-1.5/+-15/3/30V. The small outline package makes it suitable for compact designs in various electronic systems.
TLV2370IDBVR
Texas Instruments
TLV2370IDBVR by Texas Instruments is a CMOS operational amplifier with a max input offset voltage of 6000 uV and a nominal unity gain bandwidth of 3000 kHz. It is commonly used in automotive applications due to its low-bias and wideband capabilities.
LM324N
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
ADA4084-2ARZ-RL
Analog Devices
ADA4084-2ARZ-RL by Analog Devices is a dual operational amplifier with low offset voltage of 250uV and bias current of 0.45uA. Ideal for automotive applications, it offers high common mode rejection ratio of 124dB and unity gain bandwidth of 15.9MHz in a small outline package.
OPA2188AIDGKR
OPA2188AIDGKR by Texas Instruments is a dual operational amplifier with low-offset and low-bias features. It has a max input offset voltage of 25uV, nominal unity gain bandwidth of 2MHz, and operates in an industrial temperature range. Ideal for precision applications requiring micropower consumption and high common mode rejection ratio.
LM2902D
LM2902D by Texas Instruments is a quad operational amplifier with 4 functions. It has a max input offset voltage of 10000 uV and micropower feature. Widely used in automotive applications due to its low-bias, high common mode rejection ratio, and small outline package style.
OPA2277U
OPA2277U by Texas Instruments is a dual operational amplifier with low-offset voltage of 50uV and micropower consumption of 1.65mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140dB and unity gain bandwidth of 1000kHz in a small outline package.
OPA4277UA/2K5E4
OPA4277UA/2K5E4 by Texas Instruments is a micropower operational amplifier with low-offset and high common mode rejection ratio. It operates on +-15V supplies, has a unity gain bandwidth of 1MHz, and consumes 3.3mA max supply current. Ideal for industrial applications requiring precise signal amplification in compact designs.
Advanced Micro Devices
OPA2237EA/250
OPA2237EA/250 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It offers a max input offset voltage of 950uV, nominal common mode reject ratio of 90dB, and min voltage gain of 10,000. Ideal for industrial applications requiring precise signal amplification in a compact package.
OPA2350UA
OPERATIONAL AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
OP07CSZ-REEL7
Analog Devices' OP07CSZ-REEL7 is a voltage-feedback operational amplifier with low-offset and high common mode rejection ratio. It operates at industrial temperature range, with a max supply voltage of ±22V. Ideal for precision applications requiring high gain and low bias current in compact designs.
MCP602-I/SN
MCP602-I/SN by Microchip Tech is a CMOS Op Amp with 3000uV input offset voltage, 90dB CMRR, and 2800kHz unity gain bandwidth. Ideal for industrial applications requiring low bias current and micropower consumption in a small outline package.
LM7322MMX/NOPB
LM7322MMX/NOPB by Texas Instruments is a dual operational amplifier with 6000uV max input offset voltage and 1.5uA max average bias current. Ideal for automotive applications, it operates at -40 to 125 °C, has a unity gain bandwidth of 16000 kHz, and requires +-1.25/+-16/2.5/32 V power supplies.
LM2904D-T
LM2904D-T by NXP Semiconductors is a dual operational amplifier with 70 dB CMRR, 1000 kHz unity gain bandwidth, and 9000 uV max input offset voltage. Ideal for automotive applications due to its small outline package and wide temperature range from -40°C to 125°C.
OPA2320AIDGKR
OPA2320AIDGKR by Texas Instruments is a CMOS operational amplifier with low-offset and low-bias features. It has a max input offset voltage of 150 uV, nominal voltage of 5V, and nominal unity gain bandwidth of 20 MHz. Ideal for automotive applications due to its temperature grade and small outline package style.
OPA2192QDGKRQ1
OPA2192QDGKRQ1 by Texas Instruments is a dual operational amplifier with low-offset and low-bias features. It operates at a supply voltage of 3V, offers high common mode rejection ratio of 120dB, and has a unity gain bandwidth of 10MHz. Ideal for automotive applications due to AEC-Q100 screening level and small outline package style.
LM2902N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
INA168NA/250
Texas Instruments' INA168NA/250 Op Amp has a 1000uV Max Input Offset Voltage, 10uA Max Average Bias Current, and 120dB Nominal CMRR. Ideal for automotive applications with a Vsup of 5V, it features a compact design with small outline and low profile package style. The op amp operates in temperatures ranging from -40 to 125°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
PTLV9002QDGKRQ1
PTLV9002QDGKRQ1 by Texas Instruments is a CMOS operational amplifier with 2 functions, suitable for automotive applications. It features a max input offset voltage of 1500 uV, nominal voltage of 5V, and a unity gain bandwidth of 1000 kHz. With micropower capabilities and AEC-Q100 screening level, it offers high performance in a small outline package.
PTLV9004IPWR
PTLV9004IPWR by Texas Instruments is a CMOS operational amplifier with 4 functions, 77 dB CMRR, and 1000 kHz unity gain bandwidth. It operates in automotive temperature grade range (-40 to 125 °C) and has a max supply voltage of 6 V. Ideal for applications requiring high precision amplification in compact spaces.
PTLV9002IDR
PTLV9002IDR by Texas Instruments is a dual operational amplifier with 2000uV max input offset voltage and 77dB nominal CMRR. Ideal for automotive applications, it operates b/w -40 to 125°C, has a unity gain bandwidth of 1MHz, and consumes only 0.85mA at a supply voltage of 5V.
PTLV9061IDBVR
OPERATIONAL AMPLIFIER;
PTLV9154QPWRQ1
PTLV9154QPWRQ1 by Texas Instruments is an Operational Amplifier with 4 functions, 125 dB CMRR, and 4500 kHz unity gain bandwidth. Ideal for automotive applications due to AEC-Q100 screening level, low-offset voltage of 675 uV, and micropower consumption. Package style is small outline with thin profile and shrink pitch.
PTLV9001QDCKRQ1
PTLV9001QDCKRQ1 by Texas Instruments is an Operational Amplifier with a max supply voltage of 6V and nominal unity gain bandwidth of 1000 kHz. It is designed for automotive applications, featuring AEC-Q100 screening level and a compact package style. With a low supply current of 0.085 mA, it offers high performance in a small outline form factor.
PTLV9051IDBVR
PTLV9051IDBVR by Texas Instruments is a CMOS Operational Amplifier with 5 terminals and a supply voltage of 5V. It offers a max input offset voltage of 2000uV, common mode reject ratio of 79dB, and unity gain bandwidth of 5000kHz. Ideal for automotive applications due to its low profile package style and wide operating temperature range from -40°C to 125°C.
PTLV9061SIDBVR
PTLV9061IDCKR
PTLV9001IDCKR
PTLV9001IDCKR by Texas Instruments is a CMOS Operational Amplifier with 2000uV Max Input Offset Voltage, 77dB Nominal CMRR, and 1000kHz Unity Gain Bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and small form factor (1.25mm W x 2mm L).
PTLV9101IDBVR
PTLV9101IDBVR by Texas Instruments is a 5-terminal operational amplifier with a max supply voltage of 20V and operating temperature range from -40 to 125°C. It offers a nominal unity gain bandwidth of 1100 kHz, common mode reject ratio of 90 dB, and low supply current at 0.15 mA. Ideal for automotive applications due to its small outline package style and high common mode rejection ratio.
PTLV9102IDR
PTLV9102IDR by Texas Instruments is a micropower operational amplifier with low bias current and high common mode rejection ratio. With a voltage feedback architecture, it offers a nominal unity gain bandwidth of 1250 kHz, making it suitable for automotive applications requiring precise signal amplification in compact designs. The surface-mount package style and small outline make it ideal for space-constrained environments while ensuring reliable performance at temperatures ranging from -40 to 125°C.
PTLV9002IDDFR
The Texas Instruments PTLV9002IDDFR is a dual operational amplifier with 2000uV max input offset voltage and 95dB CMRR. Ideal for automotive applications, it operates b/w -40 to 125 °C with a supply voltage of 5V. With a small outline package style, it offers a unity gain bandwidth of 1MHz and slow rate of 2V/us.
PTLV9301IDBVR
PTLV9301IDBVR by Texas Instruments is a small outline, low profile operational amplifier with 5 terminals. It features a max input offset voltage of 2500 uV and nominal voltage of 4.5 V, making it ideal for automotive applications requiring high common mode rejection ratio and low power consumption. With a unity gain bandwidth of 1000 kHz, this op amp is suitable for precision signal conditioning in compact electronic systems.
PTLV9064QPWRQ1
PTLV9064QPWRQ1 by Texas Instruments is a CMOS Operational Amplifier with 4 functions, 103 dB CMRR, and 1600 uV max input offset voltage. Ideal for automotive applications due to AEC-Q100 screening level, Vsup of 5V, and micropower consumption. Package style: small outline, thin profile, shrink pitch.
PTLV9152QDGKRQ1
PTLV9152QDGKRQ1 by Texas Instruments is an operational amplifier with 2 functions, low-offset, and micropower features. It has a max input offset voltage of 750 uV, nominal voltage of 4 V, and nominal unity gain bandwidth of 4500 kHz. Ideal for automotive applications due to AEC-Q100 screening level and small outline package style.
PTLV9061IDPWR
PTLV9151QDBVRQ1
PTLV9151QDBVRQ1 by Texas Instruments is an Operational Amplifier with a max input offset voltage of 895uV, low bias current of 0.001uA, and micropower feature. Ideal for automotive applications due to AEC-Q100 screening level, it offers high common mode rejection ratio and operates in wide temperature range from -40 to 125 °C.
PTLV9064IDR
PTLV9064IDR by Texas Instruments is a CMOS operational amplifier with 4 functions. It has a max input offset voltage of 2000 uV and a nominal common mode reject ratio of 103 dB. This amplifier is commonly used in automotive applications due to its temperature grade and small package size.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved