Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LP8900TLE-AAEB/NOPB by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2.8V and 2.7V output voltages, suitable for applications requiring low dropout voltage and precise voltage regulation. It operates in temperatures ranging from -40 to 125°C, making it ideal for various electronic devices needing stable power supply. The package style is a grid array with very thin profile and fine pitch, providing compact design options for space-constrained projects.
Median Price
$0.490
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
1k+ parts
$0.407
10k+ parts
$0.363
Digiode
$0.381
Anansix
Vyrian
Corphita
$0.361
Component Stockers USA
$0.410
$0.390
Parana Technologies
$6.910
$7.513
ChromeModa Solutions
$7.764
$6.366
IDEA Electronic Components Group
$6.988
Metaverse IC Inc.
QUARKTWIN TECHNOLOGY LTD
Microchip USA
Perfect Parts
DigiPath Technology Company
$7.000
The use of plastic/epoxy for the package body material makes the regulator lightweight and durable, suitable for various applications.
With a low maximum dropout voltage, this regulator is highly efficient and ensures minimal power loss during operation.
The surface mount capability makes it easy to integrate this regulator into circuit boards, saving space and simplifying the assembly process.
The high operating temperature range allows this regulator to be used in a wide range of environments without compromising performance.
With a stable minimum output voltage, this regulator provides consistent power output for connected devices.
The CMOS technology used in this regulator ensures low power consumption and high efficiency, making it suitable for battery-operated devices.
The nominal output voltage of 2.7 V meets common voltage requirements for many electronic devices, making this regulator a versatile choice.
The rectangular package shape allows for easy placement on circuit boards and efficient use of space in cramped electronic devices.
The ball terminal form provides a secure and reliable connection, ensuring stable power delivery to connected devices.
Fixed Regulators - Positive Multiple Output LDO LP8900TLE-AAEB/NOPB attributes and parameters. Explore more Fixed Regulators - Positive Multiple Output LDO devices from Texas Instruments
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Load Regulation:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current-1:
Maximum Output Current-2:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Maximum Output Voltage-2:
Minimum Output Voltage-2:
Nominal Output Voltage-2:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
LP8900TLE-AAEB/NOPB Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
1N4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Taitron Components
BAV99
Kec
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
2N2222A
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Rfe International
LL4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBR1560CT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Maximum Repetitive Peak Reverse Voltage: 60 V; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 150 A;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
TCA6424ARGJR
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
CRCW080510K0FKEA
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
1N4148WT
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Microsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
DS18B20+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
L4937NL
STMicroelectronics
L4937NL by STMicroelectronics is a fixed positive multiple output LDO regulator with a max dropout voltage of 0.6V and operates b/w -40 °C to 125°C. It delivers dual outputs at 5V, supporting applications requiring stable power supply. Ideal for compact designs, it features a through-hole package with 7 terminals.
TPS70348PWP
TPS70348PWP by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 3.3V and 1.5V outputs, ideal for applications requiring low dropout voltage of 0.25V, operating in temperatures from -40°C to 125°C. It features a small outline package with gull wing terminals and dual terminal position, suitable for surface mount assembly.
NCP151CCMX280180TCG
Onsemi
NCP151CCMX280180TCG by Onsemi is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It has a Max Dropout Voltage of 0.56V and 0.37V, suitable for applications requiring stable voltage regulation in compact spaces. Operating temperature range from -40 to 85 °C makes it ideal for various electronic devices.
TPS71830-30DRVR
TPS71830-30DRVR by Texas Instruments is a BICMOS technology-based LDO regulator with 3% voltage tolerance. It offers dual outputs at 3V and 2.91V, each with a max output current of 0.2A. This small outline package is ideal for applications requiring precise voltage regulation in limited space.
MCP1722-3312H/S7X
Microchip Technology
MCP1722-3312H/S7X by Microchip Technology is a CMOS technology-based LDO regulator with 3.3V and 12V output voltages. It has a max input voltage of 55V, suitable for applications requiring stable power supply in automotive electronics and industrial control systems. The compact package style with gull wing terminals makes it ideal for surface mount PCB designs.
MAX8559ETA11
Analog Devices
Analog Devices' MAX8559ETA11 is a BICMOS technology-based LDO regulator with 2 outputs. It offers a max dropout voltage of 0.12 V, operating temperature up to 150 °C, and a package style of small outline with very thin profile. Ideal for applications requiring fixed positive multiple output regulators in compact spaces.
LD3986J3133R-E
LD3986J3133R-E by STMicroelectronics is a fixed positive multiple output LDO regulator with a max dropout voltage of 0.1V and operates from -40 °C to 125°C. It delivers two outputs at 3.1V and 3.3V, each supporting up to 150mA. Ideal for compact electronic applications requiring stable voltage regulation.
LP2966MM3333EP
LP2966MM3333EP by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It offers a Nominal Output Voltage of 3.3V and Max Dropout Voltage of 0.27V, suitable for applications requiring stable power supply in compact electronic devices. The package style is Small Outline, Thin Profile, Shrink Pitch making it ideal for space-constrained designs.
TPS73HD325PWPR
TPS73HD325PWPR by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2.5V and 3.3V outputs, ideal for applications requiring stable voltage regulation. It features a max dropout voltage of 0.8V, operating temperature range from -40°C to 125°C, and can handle a max output current of 0.75A per channel.
TPS70451PWP
TPS70451PWP by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It offers a Max Dropout Voltage of 0.25 V, operating temperature range from -40 to 125°C, and supports up to 2 A output current. Ideal for applications requiring stable voltage regulation in compact spaces.
TPS71818-33DRVR
TPS71818-33DRVR by Texas Instruments is a fixed positive multiple output LDO regulator with 2 outputs. It has a max dropout voltage of 0.4 V and can operate in temperatures ranging from -40 to 125°C. Ideal for applications requiring stable voltage regulation in compact spaces.
LP5996SDX-3308
LP5996SDX-3308 by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 3.3V and 0.8V nominal output voltages, suitable for applications requiring low dropout voltages of 0.22V and 0.55V. This CMOS technology regulator has a max input voltage of 6V, making it ideal for compact electronic devices needing precise power regulation in a small outline package style.
LP2967ITP-1825
LP2967ITP-1825 by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It has a Max Dropout Voltage of 0.425 V, operating temperature range from -40 to 125 °C, and package style of Grid Array. Ideal for applications requiring precise voltage regulation in compact electronic devices.
LP2966IMM-1828
Texas Instruments LP2966IMM-1828 is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It has a max dropout voltage of 0.27V and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring precise voltage regulation in compact spaces.
L5956PDTR
L5956PDTR by STMicroelectronics is a fixed positive multiple output LDO regulator with a max dropout voltage of 1.5V and operates from -55 °C to 150°C. It provides four outputs, delivering 8.5V at 0.5A and 5V at 0.3A, ideal for compact electronic applications. Its surface mount design ensures efficient space utilization in modern circuits.
LP5996SD-3333/NOPB
LP5996SD-3333/NOPB by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 3.3V nominal output voltage, 0.15A max output current, and 0.22V dropout voltage. Ideal for applications requiring stable power supply in compact spaces with dual terminals and small outline package style.
LP2966IMMX-1833
LP2966IMMX-1833 by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It offers a Nominal Output Voltage of 1.8V and 3.3V, with Max Dropout Voltage of 0.27V each. Ideal for applications requiring stable voltage regulation in compact spaces.
TLV7111533DDSET
TLV7111533DDSET by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2% voltage tolerance. It offers dual outputs at 1.5V and 3.3V, suitable for applications requiring precise voltage regulation in compact spaces. Operating temperature ranges from -40°C to 125°C, making it ideal for various electronic devices.
TPS71247DRCR
TPS71247DRCR by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2.7V min input voltage, 0.25A max output current for each of its 2 outputs, and 3% max voltage tolerance. It is ideal for applications requiring stable power supply with tight voltage regulation in compact electronic devices.
TPS71933-28DRVT
TPS71933-28DRVT by Texas Instruments is a fixed positive multiple output LDO regulator with 3.3V and 2.8V nominal output voltages, ideal for applications requiring low dropout voltage of 0.4V, such as portable electronic devices. It features a small outline package style with very thin profile and operates in temperatures ranging from -40°C to 125°C, making it suitable for various compact designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
LP8900TLE-3333
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: VFBGA; Terminal Form: BALL; Maximum Voltage Tolerance: 2.2 %; Operating Temperature (TJ-Max): 125 Cel;
LP8900TLE-3333/NOPB
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: VFBGA; Terminal Form: BALL; Maximum Input Voltage Absolute: 6.5 V; Maximum Voltage Tolerance: 1 %;
LP8900TLE-AAAH
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: VFBGA; Terminal Form: BALL; Maximum Voltage Tolerance: 2.3 %; Minimum Input Voltage: 3.2 V;
LP8900TLE-AAAH/NOPB
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: VFBGA; Terminal Form: BALL; Maximum Input Voltage Absolute: 6.5 V; Maximum Voltage Tolerance: 2.25 %;
LP8900TLE-AACB
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: VFBGA; Terminal Form: BALL; Maximum Voltage Tolerance: 2.2 %; Maximum Output Voltage-2: 1.8405 V;
LP8900TLE-AAEB
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: VFBGA; Terminal Form: BALL; Maximum Voltage Tolerance: 2.2 %; Maximum Input Voltage: 5.5 V;
LP8900TLE-AAEC
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: VFBGA; Terminal Form: BALL; Maximum Voltage Tolerance: 2.2 %; Maximum Output Voltage-2: 1.227 V;
LP8900TLE-AAEC/NOPB
LP8900TLX-3333
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: VFBGA; Terminal Form: BALL; Maximum Voltage Tolerance: 2.2 %; Maximum Output Voltage-1: 2.863 V;
LP8900TLX-3333/NOPB
LP8900TLX-AAAH
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: VFBGA; Terminal Form: BALL; Maximum Voltage Tolerance: 2.3 %; Minimum Output Voltage-1: 2.639 V;
LP8900TLX-AAAH/NOPB
LP8900TLX-AACB
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: VFBGA; Terminal Form: BALL; Maximum Voltage Tolerance: 2.2 %; Maximum Seated Height: .675 mm;
LP8900TLX-AAEB
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: VFBGA; Terminal Form: BALL; Maximum Voltage Tolerance: 2.2 %; No. of Functions: 1;
LP8900TLX-AAEB/NOPB
LP8900TLX-AAEC
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: VFBGA; Terminal Form: BALL; Maximum Voltage Tolerance: 2.2 %; Terminal Pitch: .5 mm;
LP8900TLX-AAEC/NOPB
LP8900TLE-AAEB/NOPB
National Semiconductor
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved