Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LP2950CZ-3.3/LFT1 by Texas Instruments is a fixed positive single output standard regulator with 3.3V nominal output voltage and 0.1A max output current. It has a max input voltage of 30V, operating temperature range from -40 to 125°C, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
Median Price
$0.291
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
1k+ parts
$0.242
10k+ parts
$0.216
Digiode
$0.226
Vyrian
Ampacity Inc.
$0.202
Corphita
$0.214
Vigor
$0.230
Corohmni
$0.238
Semicontronic
$0.440
$0.429
$0.427
Parana Technologies
$5.265
$5.888
DigiPath Technology Company
$5.798
$5.334
ChromeModa Solutions
$5.916
$4.851
IDEA Electronic Components Group
$5.324
Microchip USA
This material provides good durability and protection for the internal components of the regulator, making it reliable for long-term use.
With a high operating temperature limit, this regulator can handle a wide range of environmental conditions without the risk of overheating.
Bipolar technology ensures stable and accurate voltage regulation, making this regulator suitable for precision applications.
The fixed output voltage of 3.3V makes this regulator ideal for applications that require a consistent voltage supply.
With a maximum output current of 0.1A, this regulator can effectively power low to medium power devices.
The high maximum input voltage rating allows for flexibility in power source selection, making this regulator versatile for various applications.
Fixed Regulators - Positive Single Output Standard LP2950CZ-3.3/LFT1 attributes and parameters. Explore more Fixed Regulators - Positive Single Output Standard devices from Texas Instruments
Adjustability:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
JESD-609 Code:
Maximum Line Regulation:
Maximum Load Regulation:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Nominal Output Voltage-1:
Package Body Material:
Package Equivalence Code:
Packing Method:
Qualification Status:
Regulator Type:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Pitch:
Terminal Position:
Maximum Voltage Tolerance:
LP2950CZ-3.3/LFT1 Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
BSS138
Vishay Intertechnology
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
2N2222A
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
Semitron
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Semtech
LM555CMX
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM340S-5.0/NOPB
Texas Instruments
LM340S-5.0/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
LM340SX-5.0/NOPB
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
MC78L12ACPG
MC78L12ACPG by Onsemi is a fixed positive single output standard regulator with 12V nominal output voltage. It has a max load regulation of 0.1% and can handle up to 0.1A output current. Ideal for applications requiring stable voltage supply in the range of 14.5V to 27V, such as power management circuits in electronic devices.
MC7808BDTG
MC7808BDTG by Onsemi is a fixed positive single output standard regulator with 1A max output current. It has an operating temperature range of -40 to 125°C and a package style of small outline, heat sink/slug. Ideal for applications requiring stable 8V output voltage with low line and load regulation.
MC7815BDTRKG
MC7815BDTRKG by Onsemi is a fixed positive single output standard regulator with an output voltage of 15V and max current of 1A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits. The package style is small outline with gull wing terminals, ideal for surface mount assembly.
MC78M12CDTRKG
MC78M12CDTRKG by Onsemi is a fixed positive single output standard regulator with an output voltage of 12V and max current of 0.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in a compact package. The device features a small outline package with gull wing terminals for surface mount assembly.
L78L06ACD13TR
STMicroelectronics
STMicroelectronics L78L06ACD13TR is a fixed positive single output standard regulator with 6V nominal output voltage and 0.07A max output current. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
KA7805ERTF
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Packing Method: TR;
ZXTR2005Z-13
Diodes Incorporated
ZXTR2005Z-13 by Diodes Inc. is a fixed positive LDO regulator with 5V output voltage, 0.1A max current, and 10% voltage tolerance. It operates b/w -40 to 125°C, suitable for applications requiring stable low power supply in compact designs with SMD packaging.
UA7806CKC
UA7806CKC by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 6V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in a through-hole package.
S-1335G18-A4T2U3
Ablic
Ablic's S-1335G18-A4T2U3 is a CMOS technology fixed positive single output standard regulator with 1.8V nominal output voltage and 1% voltage tolerance. With a small outline package style, it is ideal for applications requiring precise voltage regulation in compact electronic devices.
LM340T-15/NOPB
LM340T-15/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 15V and max current of 1.5A. It operates b/w 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits. With a package style of flange mount and through-hole terminal form, it offers reliable performance in a compact design.
LM78M05CT
LM78M05CT by Texas Instruments is a fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a max output current of 0.5A, voltage tolerance of 5%, and dropout voltage of 1.8V. Ideal for applications requiring stable 5V power supply in various electronic devices.
LP5900TL-4.5/NOPB
LP5900TL-4.5/NOPB by Texas Instruments is a CMOS fixed positive single output standard regulator with an output voltage of 4.5 V and max current of 0.15 A. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring precise voltage regulation in compact electronic devices.
NCV78M05BTG
NCV78M05BTG by Onsemi is a fixed positive single output standard regulator with a nominal output voltage of 5V and max output current of 0.5A. It operates in temperatures ranging from -40 to 125°C, making it suitable for automotive applications requiring stable voltage regulation. The device comes in a through-hole package style with matte tin terminal finish, ideal for use in harsh environments where reliability is crucial.
LM340MPX-5.0
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
1906
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: WIRE; Surface Mount: NO; Package Shape: ROUND; JESD-30 Code: O-PBCY-W3;
MC7812ACD2TR4G
MC7812ACD2TR4G by Onsemi is a fixed positive single output standard regulator with an output voltage of 12V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits. This surface-mount device has a compact rectangular package style with gull wing terminals, ideal for space-constrained designs.
L78L18CD13TR
L78L18CD13TR by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 18V and max current of 0.07A. It operates within a temperature range of 0-125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
MC7812CD2TG
MC7812CD2TG by Onsemi is a fixed positive single output standard regulator with an output voltage of 12V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation. The package style is small outline with gull wing terminals, ideal for surface mount assembly.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
LP2951ACSDX-3.3/NOPB
LP2951ACSDX-3.3/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 3.3V and max current of 0.1A. It operates within a temperature range of -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
LP2951CSD-3.3/NOPB
LP2951CSD-3.3/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 3.3V and max current of 0.1A. It operates in a temperature range from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With a small outline package style and surface-mount capability, it offers precise regulation with minimal load and line variations.
LP2951CSDX-3.3/NOPB
Texas Instruments LP2951CSDX-3.3/NOPB is a fixed positive single output standard regulator with 3.3V nominal output voltage and 0.1A max output current. Operating temperature range from -40 to 125 °C makes it suitable for various applications requiring stable voltage regulation in compact designs. Package style includes small outline, heat sink/slug, and very thin profile for space-constrained PCB layouts.
LP2951CSD-3.0/NOPB
LP2951CSD-3.0/NOPB by Texas Instruments is a fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 3V, max load regulation of 0.009%, and max output current of 0.1A. Ideal for applications requiring precise voltage regulation in compact spaces.
LP2951CSDX-3.0/NOPB
LP2951CSDX-3.0/NOPB by Texas Instruments is a fixed positive single output standard regulator with 3V nominal output voltage, 29V max output voltage, and 0.1A max output current. It is ideal for applications requiring precise voltage regulation in a compact package, such as portable electronics and automotive systems.
LP2950CZ-5.0/LFT7
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-92; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 2.4 %;
LP2950CZ-5.0/LFT1
LP2983AIM5-1.0/NOPB
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 3.5 %;
LP2983AIM5-1.2
LP2983AIM5-1.2/NOPB
LP2950CZ-5.0/LFT8
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 2.4 %; Package Body Material: PLASTIC/EPOXY; Terminal Pitch: 1.27 mm;
LP2983AIM5X-1.0
LP2983AIM5-1.0
LP2950CZ-5.0/LFT3
LP2950CZ-5.0/LFT3 by Texas Instruments is a fixed positive single output standard regulator with a nominal output voltage of 5V and max output current of 0.1A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in a compact cylindrical package.
LP2950CZ-3.0/LFT3
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 2.4 %; Terminal Position: SINGLE; Surface Mount: NO;
LP2950ACZ-5.0/LFT3
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-92; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 1.5 %;
LP2950ACZ-5.0/LFT1
LP2950ACZ-5.0/LFT7
LP2950CZ-3.3/LFT3
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved