Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LM337LMWC by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and max output current of 0.1A. Operating temperature ranges from -25°C to 125°C, making it suitable for various applications requiring precise voltage regulation in challenging environments. This surface-mount device comes in an uncased chip package style, ideal for compact designs where space is limited.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Anansix
Parana Technologies
$3.145
$3.665
ChromeModa Solutions
$3.534
$2.898
IDEA Electronic Components Group
$3.181
AZTECH Wire
$7.520
$7.220
$7.080
$6.940
One Stop Electronics
$15.500
DigiPath Technology Company
$3.186
Corphita
Surface mount capability makes it easier to integrate into electronic circuits and saves space on the PCB.
Can operate reliably at high temperatures, making it suitable for various environmental conditions.
No lead terminals provide a more secure and reliable connection, reducing the risk of disconnection or failure.
Can operate at low temperatures, making it versatile for use in different climates.
Provides a stable and adjustable negative voltage output starting from 1.2V, suitable for various applications.
The uncased chip design offers flexibility in mounting options and provides compactness for space-constrained applications.
An adjustable negative single output standard regulator offers precise voltage control and regulation capabilities for different electronic systems.
Upper terminal position provides ease of connection in circuit layouts and minimizes interference with other components.
Capable of providing a maximum output voltage of 37V, allowing for a wide range of voltage requirements in applications.
Can deliver a maximum output current of 0.1A, suitable for low-power applications and circuits.
Adjustable Regulators - Negative Single Output Standard LM337LMWC attributes and parameters. Explore more Adjustable Regulators - Negative Single Output Standard devices from Texas Instruments
JESD-30 Code:
No. of Functions:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Qualification Status:
Regulator Type:
Surface Mount:
Terminal Form:
Terminal Position:
LM337LMWC Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
1N4148
Unitrode
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
2N2222A
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
SS14
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT2222ALT1G
Onsemi
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
SMBJ18CA
Goodwork Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
BAV99
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Won-top Electronics
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
ICL7664C/D
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: DIE; Terminal Form: NO LEAD; Minimum Output Voltage-1: 1.3 V; Qualification Status: Not Qualified;
M38510/11804SYA
M38510/11804SYA by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and max output current of 1.5A. Operating temperature ranges from -55°C to 150°C, making it suitable for various industrial applications requiring precise voltage regulation in harsh environments. Built with bipolar technology, this regulator comes in a round package style with flange mount and pin/peg terminal form for easy installation and reliable performance.
ICL7664CJA
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: DIP; Terminal Form: THROUGH-HOLE; Maximum Seated Height: 5.08 mm; Maximum Operating Temperature: 70 Cel;
LM337LZ/NOPB
National Semiconductor
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-92; Terminal Form: WIRE; Package Body Material: PLASTIC/EPOXY; Maximum Output Current-1: .1 A;
LM137KMDS
LM137KMDS by Texas Instruments is an adjustable negative single output standard regulator with a max input-output voltage differential of 40V and operating temperature range from -55°C to 150°C. This BIPOLAR technology chip has no lead terminal form, suitable for surface mount applications. It offers an adjustable output voltage range from 1.2V to 37V, making it ideal for various electronic devices requiring precise voltage regulation.
KA337
Samsung
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; No. of Functions: 1; Nominal Dropout Voltage-1: 3 V;
LM337KMDC
LM337KMDC by Texas Instruments is a BIPOLAR adjustable negative single output standard regulator with an operating temperature range of 0 to 125°C. It offers a min output voltage of 1.2V and a max output voltage of 37V, making it suitable for various applications requiring precise voltage regulation in surface mount configurations.
M38510/11804SYX
M38510/11804SYX by Texas Instruments is an adjustable negative single output standard regulator with a max output current of 1.5A and a max input-output voltage differential of 40V. It operates in temperatures ranging from -55°C to 150°C, making it suitable for military applications requiring high reliability and performance in harsh environments. The package style is flange mount with a round shape, ideal for secure mounting in rugged conditions.
LM337T
Fairchild Semiconductor
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; JESD-609 Code: e3; Package Shape: RECTANGULAR;
LM137HMD8
LM137HMD8 by Texas Instruments is a BIPOLAR adjustable negative single output standard regulator with a max output voltage of 37V and max output current of 0.5A. It operates in temperatures ranging from -55°C to 150°C, making it suitable for various applications requiring precise voltage regulation in challenging environments.
KA337LZ
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: WIRE; Minimum Output Voltage-1: 1.2 V; Package Shape: ROUND; Surface Mount: NO;
M38510/11803BXA
M38510/11803BXA by Texas Instruments is an adjustable negative single output standard regulator with a max output current of 1.5 A and operating temperature range from -55 to 150°C. It features a package body made of metal, suitable for applications requiring a min input-output voltage differential of 3 V and max input-output voltage differential of 40 V in MIL-M-38510 Class B screening level environments.
LM137H
STMicroelectronics
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: WIRE; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Maximum Output Voltage-1: 37 V;
LM337LM
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; No. of Outputs: 1; Peak Reflow Temperature (C): 235;
LM337IMPX/NOPB
LM337IMPX/NOPB by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and max load regulation of 1.5%. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs. The package style is small outline (SO) with gull wing terminals for surface mount assembly.
LM337LMX/NOPB
LM337LMX/NOPB by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from -25°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs. With surface mount capability and small outline package style, it offers flexibility and reliability in electronic circuits.
LM333T
LM333T by National Semiconductor is an adjustable negative single output standard regulator with a max output current of 3A and a max operating temperature of 125°C. It has a min input-output voltage differential of 3V, making it suitable for applications requiring precise voltage regulation in various electronic devices. With its bipolar technology and through-hole terminal form, LM333T offers reliable performance in a wide range of environments.
LM337IMP/NOPB
LM337IMP/NOPB by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. The package style is small outline, with surface mount capability for easy integration into electronic devices.
LM237KCSE3
LM237KCSE3 by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and max output current of 1.5A. Operating temperature ranges from -25°C to 150°C, making it suitable for various applications requiring precise voltage regulation in a compact package. With a technology of bipolar and terminal pitch of 2.54mm, this regulator is ideal for designs where space and efficiency are critical factors.
Analog Devices
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Package Code: TO-3; Terminal Form: PIN/PEG; Operating Temperature (TJ-Min): -55 Cel; Terminal Position: BOTTOM;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Peak Reflow Temperature (C): 260; Maximum Output Voltage-1: 37 V;
Motorola
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Body Material: PLASTIC/EPOXY; Terminal Finish: Tin/Lead (Sn/Pb);
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Adjustability: ADJUSTABLE; Surface Mount: NO;
LM337T by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation such as power supplies and battery chargers.
Tt Electronics Plc
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Max): 125 Cel; Package Body Material: PLASTIC/EPOXY;
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Max): 125 Cel; No. of Outputs: 1;
Linear Technology
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Maximum Output Voltage-1: 37 V;
LM337D2TR4G
LM337D2TR4G by Onsemi is an adjustable negative single output standard regulator with a max output voltage of 37V and a max load regulation of 1.5%. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Technology: BIPOLAR; Terminal Position: DUAL;
LM337TG
LM337TG by Onsemi is an adjustable negative single output standard regulator with a max output voltage of 37V and current of 1.5A. It operates at temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a min input-output voltage differential of 3V, this bipolar technology-based regulator offers reliable performance in diverse projects.
LM337IMPX
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Package Equivalence Code: SOT-223; Qualification Status: Not Qualified;
LM337IMPX by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. The package style is small outline, ideal for surface mount designs where space is limited.
LM337IMP
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input-Output Voltage Differential: 40 V; Maximum Load Regulation (%): 1.5 %;
LM337IMP by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and max load regulation of 1.5%. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LM337BD2TR4G
LM337BD2TR4G by Onsemi is an adjustable negative single output standard regulator with a max output current of 1.5 A and a max output voltage of 37 V. It operates in temperatures ranging from -40 to 125 °C and has a min input-output voltage differential of 3 V, making it suitable for various applications requiring precise voltage regulation.
LM337LM/NOPB
LM337LM/NOPB by Texas Instruments is an adjustable negative single output standard regulator with a max input-output voltage differential of 40V. Operating temperature ranges from -25°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. With a max output current of 0.1A and small outline package style, it is ideal for use in electronic devices where space and power efficiency are crucial.
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; JESD-609 Code: e3; Adjustability: ADJUSTABLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved