Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LM337TG by Onsemi is an adjustable negative single output standard regulator with a max output voltage of 37V and current of 1.5A. It operates at temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a min input-output voltage differential of 3V, this bipolar technology-based regulator offers reliable performance in diverse projects.
Median Price
$0.596
Lifecycle Status
Suppliers In-Stock
40
In-Stock Inventory
1k+
Newark
1+ parts
$0.314
100+ parts
1k+ parts
10k+ parts
Rochester
$0.420
$0.410
$0.400
-
Arrow
$0.658
$0.357
Farnell
$0.770
$0.435
$0.362
$0.348
Mouser Electronics
$0.860
$0.486
DigiKey
$0.419
$0.392
Element14
$1.230
$0.643
$0.574
$0.552
Chip1Stop
$0.489
$0.394
$0.349
Future Electronics
$0.270
$0.260
$0.245
Verical
$0.311
Master Electronics
$0.843
$0.700
$0.645
RS (Exports)
$0.533
$0.386
$0.384
EBV Elektronik
Flip Electronics (Authorized)
Digiode
$0.375
Maritex
$0.606
$0.341
$0.292
TME
$0.790
$0.470
$0.377
$0.340
Nova Conductors
$1.000
IBS Electronics
$0.379
$0.365
NAC Semi
$0.540
Flip Electronics
Chip Stock
Schukat
$0.494
$0.327
Vyrian
Micros
$0.539
Partservice
$0.803
$0.521
Micros sp.j. W. Kędra i J. Lic
$0.558
Bristol Electronics
Atlantic Semiconductor
Connector Distribution Corp
Cyclops Electronics Ltd
Right Parts Inc.
M&R Communications
Diverse Electronics
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
ComSIT Distribution GmbH
ComSIT USA
Sensible Micro Corp
North Shore Components
Semicontronic
$0.225
$0.219
$0.218
Corphita
$0.356
Corohmni
$0.395
Argo Parts USA
$0.421
Advanced Electronics
$0.462
$0.439
Modulus Dynamics
$0.495
$0.490
$0.475
Continental Prestige Electronics
$0.576
$0.313
$0.250
Ampacity Inc.
$0.730
Netroflash
Aztec Data Supply Inc.
$4.911
Microchip USA
$6.435
RC Electronics
$0.460
Perfect Parts
Glotronic Ltd.
Kepictronics
Lixinc
Problanco Electronics
SupplyDigital Components
TANS Electronics
Robosynatics
$0.440
$0.431
Lucentia Tech
Futuretech Components
Kulean Microsystems
Infinite Electronics LLP (Excess)
Eastek
Authorized Procurement Solutions
UHIMA Technologies
Assy Fe
GreenTree Electronics
Computer Components Inc. - USA
PLASTIC/EPOXY - This material provides durability and protection for the regulator, making it suitable for various applications.
125 °C - With a high maximum operating temperature, this regulator can withstand extreme conditions without compromising performance.
40 V - This wide differential voltage range allows for flexibility in input voltage options.
BIPOLAR - The bipolar technology used in this regulator ensures stable and efficient performance.
RECTANGULAR - The compact rectangular shape of the package makes it easy to install and integrate into different systems.
THROUGH-HOLE - The through-hole terminals offer secure connections and easy soldering during installation.
0 °C - With a low minimum operating temperature, this regulator can operate effectively in various environments.
RAIL - The rail packing method allows for convenient storage and transportation of multiple regulators.
1.2 V - The low minimum output voltage makes this regulator suitable for applications that require low voltage levels.
3 - The three terminals provide simple connectivity and ease of installation.
0.07 - The low maximum line regulation ensures stable output voltage even with fluctuations in input voltage.
FLANGE MOUNT - The flange mount package style offers secure mounting options for added stability.
ADJUSTABLE - The adjustable feature allows for precise voltage regulation according to specific application requirements.
1.5% - With a low load regulation percentage, this regulator maintains stable output voltage under varying load conditions.
2.54 mm - The standard terminal pitch enables compatibility with various PCB designs and layouts.
3 V - The minimum input-output voltage differential ensures efficient voltage regulation for different input levels.
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR - This regulator type offers reliable performance and flexibility for voltage regulation applications.
MATTE TIN - The matte tin terminal finish provides corrosion resistance and ensures long-term durability.
SINGLE - The single terminal position simplifies installation and connection processes.
37 V - The high maximum output voltage makes this regulator suitable for applications that require higher voltage levels.
1.5 A - With a maximum output current of 1.5 A, this regulator can power a variety of components effectively.
3 V - The nominal dropout voltage ensures efficient regulation even with a minimal voltage drop between input and output.
Adjustable Regulators - Negative Single Output Standard LM337TG attributes and parameters. Explore more Adjustable Regulators - Negative Single Output Standard devices from Onsemi
Adjustability:
Nominal Dropout Voltage-1:
Maximum Input-Output Voltage Differential:
Minimum Input-Output Voltage Differential:
JESD-30 Code:
JESD-609 Code:
Maximum Line Regulation (%/V):
Maximum Load Regulation (%):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Package Body Material:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Qualification Status:
Regulator Type:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
LM337TG Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Alt Mfg Site 26/Oct/2016
PCN Packaging - Tube Shipping Chgs 26/Nov/2020
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
2N2222A
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Weitron Technology
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Diotec Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
Micropac Industries
SMBJ18CA
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Brightking
Vishay Telefunken
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
Multicomp Pro
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
Yangzhou Yangjie Electronics
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Rugao Dachang Electronic
LM337IMPX
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Package Equivalence Code: SOT-223; Qualification Status: Not Qualified;
LM137H
Linear Technology
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: WIRE; No. of Functions: 1; Nominal Dropout Voltage-1: 3 V; Maximum Output Current-1: 1.5 A;
LM137H/883
Texas Instruments
LM137H/883 by Texas Instruments is a MIL-STD-883 screened adjustable negative single output standard regulator with a max input-output voltage differential of 40V. Operating temperature ranges from -55°C to 150°C, making it suitable for harsh environments. With a min output voltage of 1.2V and max output voltage of 37V, it is ideal for applications requiring precise voltage regulation in aerospace and military systems.
LT337AM#PBF
Analog Devices
Analog Devices' LT337AM#PBF is a bipolar adjustable negative single output standard regulator with max input-output voltage differential of 40V. Operating temperature range from 0 to 125 °C makes it suitable for various applications requiring a min output voltage of 1.2V, max output current of 1.5A, and package style in-line with through-hole terminals.
LT337AM#TR
Analog Devices' LT337AM#TR is a BIPOLAR adjustable negative single output standard regulator with 1.5A max output current and 37V max output voltage. It operates in temperatures ranging from 0 to 125 °C, making it suitable for various applications requiring precise voltage regulation in electronic circuits.
LM333KSTEEL/NOPB
LM333KSTEEL/NOPB by Texas Instruments is an adjustable negative single output standard regulator with a max input-output voltage differential of 35V and operating temperature range from -40 to 125°C. It has a min output voltage of 1.2V, making it suitable for applications requiring precise voltage regulation in harsh environments. The package style is flange mount with a round shape and pin/peg terminal form, ideal for industrial and automotive electronics.
LM137KG-MW8
LM137KG-MW8 by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and max output current of 1.5A. Operating temperature ranges from -55°C to 150°C, making it suitable for various applications requiring precise voltage regulation in challenging environments. This surface-mount device has a technology of bipolar and a min input-output voltage differential of 3V, ideal for compact designs where space is limited.
LT1033CT#PBF
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR;
RH137HDICE
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: DIE; Terminal Form: NO LEAD; Terminal Position: UPPER; JESD-30 Code: R-XUUC-N3;
KA337TU
Onsemi
KA337TU by Onsemi is an adjustable negative single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates b/w 0-125 °C, making it suitable for various applications requiring precise voltage regulation in a compact package. The device features through-hole terminals and offers a nominal dropout voltage of 3V for efficient power management.
LM137H/883QS
LM137H/883QS by Texas Instruments is a MIL-STD-883 screened adjustable negative single output standard regulator with a max input-output voltage differential of 40V. Operating temperature ranges from -55 to 150°C, making it suitable for harsh environments. With a max output current of 0.5A and max output voltage of 37V, it is ideal for applications requiring precise voltage regulation in military and industrial settings.
LT337AM
LT337AM by Analog Devices is an adjustable negative single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125 °C, making it suitable for various applications requiring precise voltage regulation in electronic circuits.
LM137HPQMLV
LM137HPQMLV by Texas Instruments is a MIL-PRF-38535 Class V rated adjustable negative single output standard regulator with a max output voltage of 37V and total dose of 30k Rad(Si). Operating in temperatures ranging from -55 to 150 °C, it offers a load regulation of 2% making it suitable for applications requiring precise voltage control in harsh environments.
M38510/11804SYX
M38510/11804SYX by Texas Instruments is an adjustable negative single output standard regulator with a max output current of 1.5A and a max input-output voltage differential of 40V. It operates in temperatures ranging from -55°C to 150°C, making it suitable for military applications requiring high reliability and performance in harsh environments. The package style is flange mount with a round shape, ideal for secure mounting in rugged conditions.
RH137HDWF
Analog Devices' RH137HDWF is an adjustable negative single output standard regulator with a max output voltage of 22V and max load regulation of 0.5%. Suitable for surface mount applications, it has a max input-output voltage differential of 30V, making it ideal for precision power management in various electronic devices.
ICL7664CPA
Maxim Integrated
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: DIP; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: .025 A; Terminal Pitch: 2.54 mm;
ADP7182ACPZ-R7
Analog Devices' ADP7182ACPZ-R7 is an adjustable negative single output standard regulator with a max output voltage of 28.36V and max output current of 0.2A. Operating temperature ranges from -40 to 125°C, making it suitable for various applications in electronics requiring precise voltage regulation. The compact square package with no lead terminals and matte tin finish enhances its versatility for surface mount designs.
LM337LZ/NOPB
LM337LZ/NOPB by Texas Instruments is an adjustable negative single output standard regulator with a max input-output voltage differential of 40V. Operating temperature ranges from -25°C to 125°C, making it suitable for various applications requiring precise voltage regulation. With a max output current of 0.1A and adjustable features, it is commonly used in electronic circuits that demand stable power supplies.
JL137SXA
The Texas Instruments JL137SXA is an adjustable negative single output standard regulator with a max output voltage of -37V and max output current of 1.5A. It operates in temperatures ranging from -55°C to 150°C, making it suitable for various industrial applications requiring precise voltage regulation. The package body material is metal, ensuring durability and reliability in harsh environments.
LM337KC
LM337KC by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and max load regulation of 1.5%. It operates in temperatures ranging from 0°C to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with a rectangular shape and through-hole terminal form.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LM337IMPX/NOPB
LM337IMPX/NOPB by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and max load regulation of 1.5%. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs. The package style is small outline (SO) with gull wing terminals for surface mount assembly.
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Peak Reflow Temperature (C): 260; Maximum Output Voltage-1: 37 V;
LM337T
Motorola
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Body Material: PLASTIC/EPOXY; Terminal Finish: Tin/Lead (Sn/Pb);
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Adjustability: ADJUSTABLE; Surface Mount: NO;
LM337T by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation such as power supplies and battery chargers.
Tt Electronics Plc
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Max): 125 Cel; Package Body Material: PLASTIC/EPOXY;
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Max): 125 Cel; No. of Outputs: 1;
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; JESD-609 Code: e3; Package Shape: RECTANGULAR;
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Maximum Output Voltage-1: 37 V;
LM337D2TR4G
LM337D2TR4G by Onsemi is an adjustable negative single output standard regulator with a max output voltage of 37V and a max load regulation of 1.5%. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
LM337IMP/NOPB
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Technology: BIPOLAR; Terminal Position: DUAL;
LM337IMP/NOPB by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. The package style is small outline, with surface mount capability for easy integration into electronic devices.
LM337IMPX by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. The package style is small outline, ideal for surface mount designs where space is limited.
LM337IMP
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input-Output Voltage Differential: 40 V; Maximum Load Regulation (%): 1.5 %;
LM337IMP by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and max load regulation of 1.5%. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LM337BD2TR4G
LM337BD2TR4G by Onsemi is an adjustable negative single output standard regulator with a max output current of 1.5 A and a max output voltage of 37 V. It operates in temperatures ranging from -40 to 125 °C and has a min input-output voltage differential of 3 V, making it suitable for various applications requiring precise voltage regulation.
LM337LM/NOPB
LM337LM/NOPB by Texas Instruments is an adjustable negative single output standard regulator with a max input-output voltage differential of 40V. Operating temperature ranges from -25°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. With a max output current of 0.1A and small outline package style, it is ideal for use in electronic devices where space and power efficiency are crucial.
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; JESD-609 Code: e3; Adjustability: ADJUSTABLE;
LM337MT
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Terminal Finish: Tin/Lead (Sn/Pb); Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved