Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LM337D2TG by Onsemi is an adjustable negative single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. The package style is small outline, and it features a bipolar technology with gull wing terminals for surface mount assembly.
Median Price
$0.620
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Future Electronics
1+ parts
$0.595
100+ parts
$0.570
1k+ parts
$0.530
10k+ parts
$0.490
Adafruit Industries
$4.146
$3.938
-
Verical
$0.645
$0.575
Rochester
$0.594
$0.493
$0.439
Digiode
$0.484
Nova Conductors
$0.532
Chip Stock
Vyrian
Flip Electronics
Prism Electronics
Semi Source
First Choice Components Inc.
ComSIT Distribution GmbH
SPM Sales
GES GmbH
Lantek
Semicontronic
$0.433
$0.422
$0.420
Ampacity Inc.
Corphita
$0.459
Corohmni
$0.510
Continental Prestige Electronics
$0.521
Argo Parts USA
$0.516
Netroflash
Modulus Dynamics
$0.591
$0.585
$0.567
Advanced Electronics
Aztec Data Supply Inc.
$9.425
AZTECH Wire
$18.240
Perfect Parts
Kepictronics
SupplyDigital Components
TANS Electronics
Kulean Microsystems
Authorized Procurement Solutions
Problanco Electronics
UHIMA Technologies
Microchip USA
Robosynatics
Lucentia Tech
GreenTree Electronics
Lixinc
iodParts Technologies Inc.
This material provides durability and reliability to the product, making it suitable for various applications.
Ease of installation and space-saving design for efficient PCB layout.
Wide operating temperature range allows for use in different environmental conditions.
Can handle a significant voltage difference for stability and protection.
Bipolar technology offers high precision and low noise output.
Rectangular shape for easy integration into circuit designs.
Can operate in low-temperature conditions without performance issues.
Rail packing method facilitates automated assembly processes.
Ability to provide low output voltages for specific applications.
Simple 2-terminal design for easy installation and connectivity.
Low line regulation ensures stable output voltage regardless of input fluctuations.
Compact small outline package for space-constrained applications.
Adjustable output voltage to meet various requirements.
Precise load regulation for stable voltage output under different load conditions.
Standard terminal pitch for compatibility with industry-standard connectors.
Low minimum voltage differential for efficient voltage conversion.
Specific regulator type for reliable negative voltage regulation in standard applications.
Matte tin finish for improved solderability and conductivity.
Single terminal position for easy connection and installation.
High maximum output voltage for various power supply requirements.
Low profile design for space-limited applications.
Compact width for flexibility in PCB layout and integration.
High output current capability for powering various loads.
Allows for efficient soldering process with controlled reflow temperature.
High peak reflow temperature for reliable solder joints.
Low dropout voltage to minimize power dissipation in the regulator.
Optimal length for compact design and easy integration into circuits.
Adjustable Regulators - Negative Single Output Standard LM337D2TG attributes and parameters. Explore more Adjustable Regulators - Negative Single Output Standard devices from Onsemi
Adjustability:
Nominal Dropout Voltage-1:
Maximum Input-Output Voltage Differential:
Minimum Input-Output Voltage Differential:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation (%/V):
Maximum Load Regulation (%):
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
LM337D2TG Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Dev EOL 08/Jul/2021
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
1N4148
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
1N4148WS
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N2222A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
Meritek Electronics
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
SS14
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
MBR0520LT1
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
Tak Cheong Electronics Holdings
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
LL4148
Kec
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Bharat Electronics
Rfe International
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
ICL7664CSA-T
Maxim Integrated
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Width: 3.9 mm; Package Body Material: PLASTIC/EPOXY;
LM337KC
LM337KC by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and max load regulation of 1.5%. It operates in temperatures ranging from 0°C to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with a rectangular shape and through-hole terminal form.
LM337H/NOPB
National Semiconductor
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-39; Terminal Form: WIRE; Maximum Output Current-1: .5 A; Maximum Line Regulation (%/V): .07;
LM137H/NOPB
LM137H/NOPB by Texas Instruments is an adjustable negative single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from -55°C to 150°C, making it suitable for various applications requiring precise voltage regulation in harsh environments. With a package body material made of metal and a bipolar technology, this regulator offers high performance and reliability in compact cylindrical packaging.
LM337LZ
LM337LZ by Texas Instruments is an adjustable negative single output standard regulator with a max input-output voltage differential of 40V. Operating temperature ranges from -25 to 125°C, making it suitable for various applications requiring precise voltage regulation. With a max output current of 0.1A and load regulation of 1.5%, it is ideal for electronic devices needing stable power supply.
LM137KPQML
LM137KPQML by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and a max load regulation of 1%. Operating temperature ranges from -55 to 150°C, making it suitable for military applications requiring high reliability. With a package body material of metal and MIL-PRF-38535 screening level, it ensures robust performance in harsh environments.
LM237KTER
LM237KTER by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and max load regulation of 1%. Operating temperature ranges from -25 to 150°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
ICL7664CPA
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: DIP; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: .025 A; Terminal Pitch: 2.54 mm;
LM337D2T
Motorola
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Package Code: TO-263; Terminal Form: GULL WING; Adjustability: ADJUSTABLE; Package Equivalence Code: SMSIP3H,.55TB;
JL137BXA
The Texas Instruments JL137BXA is an adjustable negative single output standard regulator with a max output current of 1.5 A and min input voltage of 40 V. Featuring a package body material made of metal, it operates in temperatures ranging from -55 to 150 °C, making it suitable for various industrial applications requiring precise voltage regulation.
LM337KTTRG3
LM337KTTRG3 by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and max output current of 1.5A. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices. Its small outline package and surface mount capability enhance its versatility in space-constrained designs.
LT337AM
Analog Devices
LT337AM by Analog Devices is an adjustable negative single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125 °C, making it suitable for various applications requiring precise voltage regulation in electronic circuits.
LM337LM/NOPB
LM337LM/NOPB by Texas Instruments is an adjustable negative single output standard regulator with a max input-output voltage differential of 40V. Operating temperature ranges from -25°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. With a max output current of 0.1A and small outline package style, it is ideal for use in electronic devices where space and power efficiency are crucial.
LT1033CT
Linear Technology
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Minimum Operating Temperature: 0 Cel;
ICL7664CSA
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Adjustability: ADJUSTABLE; Surface Mount: YES;
M38510/11803BXA
M38510/11803BXA by Texas Instruments is an adjustable negative single output standard regulator with a max output current of 1.5 A and operating temperature range from -55 to 150°C. It features a package body made of metal, suitable for applications requiring a min input-output voltage differential of 3 V and max input-output voltage differential of 40 V in MIL-M-38510 Class B screening level environments.
LM137
STMicroelectronics
LM137 by STMicroelectronics is an adjustable negative single output regulator with a voltage range of 1.2V to 37V. It features a metal round package and flange mount style, making it ideal for various electronic applications. With 2 terminals positioned at the bottom, it's perfect for compact designs.
RH137KDWF
Analog Devices' RH137KDWF is an adjustable negative single output standard regulator with a max output current of 1.5A and max output voltage of 22V. It features a surface-mount package shape, making it suitable for applications requiring precise voltage regulation in compact spaces. With a min input-output voltage differential of 3V, this regulator offers efficient power management solutions.
LM337HVH/NOPB
LM337HVH/NOPB by National Semiconductor is an adjustable negative single output standard regulator with a max output current of 1.5A and a max load regulation of 1.5%. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in challenging environments.
JL137SYA
The Texas Instruments JL137SYA is an adjustable negative single output standard regulator with a max output current of 1.5 A and a min input voltage of 40 V. It features a package body material made of metal, operates in temperatures ranging from -55 to 150 °C, and has a regulator type of ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR. Ideal for applications requiring precise voltage regulation in electronic circuits.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LM337IMPX/NOPB
LM337IMPX/NOPB by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and max load regulation of 1.5%. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs. The package style is small outline (SO) with gull wing terminals for surface mount assembly.
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Peak Reflow Temperature (C): 260; Maximum Output Voltage-1: 37 V;
LM337T
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Body Material: PLASTIC/EPOXY; Terminal Finish: Tin/Lead (Sn/Pb);
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Adjustability: ADJUSTABLE; Surface Mount: NO;
LM337T by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation such as power supplies and battery chargers.
Tt Electronics Plc
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Max): 125 Cel; Package Body Material: PLASTIC/EPOXY;
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Max): 125 Cel; No. of Outputs: 1;
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; JESD-609 Code: e3; Package Shape: RECTANGULAR;
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Maximum Output Voltage-1: 37 V;
LM337D2TR4G
LM337D2TR4G by Onsemi is an adjustable negative single output standard regulator with a max output voltage of 37V and a max load regulation of 1.5%. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
LM337IMP/NOPB
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Technology: BIPOLAR; Terminal Position: DUAL;
LM337IMP/NOPB by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. The package style is small outline, with surface mount capability for easy integration into electronic devices.
LM337TG
LM337TG by Onsemi is an adjustable negative single output standard regulator with a max output voltage of 37V and current of 1.5A. It operates at temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a min input-output voltage differential of 3V, this bipolar technology-based regulator offers reliable performance in diverse projects.
LM337IMPX
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Package Equivalence Code: SOT-223; Qualification Status: Not Qualified;
LM337IMPX by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. The package style is small outline, ideal for surface mount designs where space is limited.
LM337IMP
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input-Output Voltage Differential: 40 V; Maximum Load Regulation (%): 1.5 %;
LM337IMP by Texas Instruments is an adjustable negative single output standard regulator with a max output voltage of 37V and max load regulation of 1.5%. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LM337BD2TR4G
LM337BD2TR4G by Onsemi is an adjustable negative single output standard regulator with a max output current of 1.5 A and a max output voltage of 37 V. It operates in temperatures ranging from -40 to 125 °C and has a min input-output voltage differential of 3 V, making it suitable for various applications requiring precise voltage regulation.
ADJUSTABLE NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; JESD-609 Code: e3; Adjustability: ADJUSTABLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved