Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LM1117T-ADJ/NOPB by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 0.8A and a max dropout voltage of 1.3V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits.
Median Price
$1.522
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$0.841
100+ parts
$0.601
1k+ parts
-
10k+ parts
Texas Instruments
$1.268
$1.047
$0.566
Arrow
$1.454
$0.945
$0.864
$0.805
Mouser Electronics
$1.590
$1.080
$0.976
$0.891
DigiKey
$1.810
$1.146
$0.971
$0.890
Farnell
$2.530
$1.520
$1.290
Element14
$4.590
$2.760
$2.340
Adafruit Industries
$6.705
$6.370
Rochester
$0.980
$0.813
$0.725
Avnet
$0.793
$0.732
Verical
Freelance Electronics
$0.597
$0.627
$0.591
Digiode
$0.747
Nova Conductors
$1.191
TME
$1.470
$0.920
$0.840
Vyrian
Anansix
Goldney Electronics S.L.
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
LIBRA Elektronik GmbH
North Shore Components
Prism Electronics
Ampacity Inc.
$0.580
Semicontronic
$0.563
Corphita
$0.707
Component Stockers USA
$0.800
$0.750
$0.720
Argo Parts USA
$0.857
Netroflash
$1.167
Continental Prestige Electronics
$1.430
$1.320
Corohmni
$6.062
Advanced Electronics
Parana Technologies
$7.799
$8.348
ChromeModa Solutions
$8.763
$7.186
IDEA Electronic Components Group
$8.325
$7.887
Microchip USA
$68.172
Perfect Parts
Authorized Procurement Solutions
DigiPath Technology Company
$7.901
Robosynatics
$3.060
Lucentia Tech
Allen Electronics Distributors
$1.234
Low dropout voltage ensures a stable output voltage even when the input voltage decreases slightly, enhancing the reliability of the product.
Bipolar technology offers high accuracy and low noise performance, making this regulator suitable for applications requiring precise voltage regulation.
With a high maximum output voltage, this regulator can support a wide range of applications that require higher voltage levels.
The high output current capability allows this regulator to power devices with higher current requirements, increasing its versatility.
Adjustable Regulators - Positive Single Output LDO LM1117T-ADJ/NOPB attributes and parameters. Explore more Adjustable Regulators - Positive Single Output LDO devices from Texas Instruments
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Input Voltage:
Minimum Input Voltage:
Maximum Input-Output Voltage Differential:
Minimum Input-Output Voltage Differential:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation (%/V):
Maximum Load Regulation (%):
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
LM1117T-ADJ/NOPB Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
2N2222A
Boca Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
SS14
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
Rochester Electronics
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
2N7002-T1-E3
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
BSS138
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
BAV99
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
AZ1117CH-ADJTRG1
Diodes Incorporated's AZ1117CH-ADJTRG1 is an adjustable positive single output LDO regulator with a max output current of 0.8A and a dropout voltage as low as 1.2V. This bipolar technology regulator operates in temperatures ranging from -20°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LM2931CMX/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; No. of Outputs: 1; Operating Temperature (TJ-Max): 125 Cel;
TPS71701DCKTG4
TPS71701DCKTG4 by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 0.15A and a max dropout voltage of 0.3V, suitable for applications requiring precise voltage regulation in compact spaces. Operating temperature ranges from -40°C to 125°C, making it versatile for various environments. The package style is small outline, thin profile, shrink pitch, ideal for surface mount applications.
LM1117IMP-ADJ/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Time At Peak Reflow Temperature (s): 40; Qualification Status: Not Qualified;
MCP1824T-ADJE/OTVAO
Microchip Technology
MCP1824T-ADJE/OTVAO by Microchip Technology is an adjustable positive single output LDO regulator with a max output voltage of 5.5V and a min dropout voltage of 0.2V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for automotive applications requiring precise voltage regulation in compact spaces.
LM1084IT-ADJ
LM1084IT-ADJ by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 5A and a max output voltage of 15V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation. With a low dropout voltage of 1.3V, this bipolar technology-based regulator offers excellent load and line regulation performance.
LT3045IMSE#PBF
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 12; Package Code: HTSSOP; Terminal Form: GULL WING; Terminal Finish: MATTE TIN; Operating Temperature (TJ-Min): -40 Cel;
LT1965IDD#TRPBF
Analog Devices
Analog Devices' LT1965IDD#TRPBF is an adjustable positive single output LDO regulator with a max output current of 1.1A and dropout voltage of 0.49V, suitable for applications requiring precise voltage regulation in compact spaces. Operating temperature range from -40 to 125°C makes it versatile for various electronic devices needing stable power supply. Package style includes small outline, heat sink/slug, and very thin profile for efficient thermal management in space-constrained designs.
LT1965IDD#PBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HVSON; Terminal Form: NO LEAD; Length: 3 mm; Width: 3 mm;
LM317K
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Terminal Form: PIN/PEG; Technology: BIPOLAR; Package Style (Meter): FLANGE MOUNT; Minimum Input-Output Voltage Differential: 3 V;
MAX8556ETE+T
Analog Devices' MAX8556ETE+T is an adjustable positive single output LDO regulator with a max output current of 4A and dropout voltage of 0.1V. Operating temperature ranges from -40 to 85°C, making it suitable for various applications requiring precise voltage regulation in compact spaces like portable electronics and IoT devices.
TPS7A8300RGRR
TPS7A8300RGRR by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 2A and a max input voltage of 6.5V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
TPS7A8300RGRT
TPS7A8300RGRT by Texas Instruments is an adjustable LDO regulator with a max output current of 2A and a dropout voltage of 0.2V, suitable for applications requiring precise voltage regulation in tight spaces. With a wide operating temperature range from -40°C to 125°C, it is ideal for use in various electronic devices where space and efficiency are crucial factors. The package style includes chip carrier and heat sink/slug options, making it versatile for different design requirements.
LT1117CST#PBF
LT1117CST#PBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 0.8A and a max dropout voltage of 1.2V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
TPS74901RGWR
TPS74901RGWR by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 3A and a max input voltage of 5.5V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. The package style includes chip carrier, heat sink/slug, and very thin profile options for versatile integration.
LM1117IMPX-ADJ
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Operating Temperature (TJ-Min): -40 Cel; Maximum Line Regulation (%/V): .025;
TPS7A7200RGTT
TPS7A7200RGTT by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 2A and a min input voltage of 1.43V. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices. The package style includes chip carrier, heat sink/slug, and very thin profile options for versatile integration.
TPS74401KTWRG3
TPS74401KTWRG3 by Texas Instruments is an adjustable LDO regulator with max output voltage of 3.6V, dropout voltage of 0.24V, and max output current of 3A. Ideal for applications requiring precise voltage regulation in a compact package.
NCV1117DTARKG
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Output Current-1: 1 A; Maximum Input-Output Voltage Differential: 10 V;
LT3042EDD#TRPBF
LT3042EDD#TRPBF by Analog Devices is an adjustable positive single output LDO regulator with a max output voltage of 15V and a max output current of 0.2A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
SPX1117M3-L/TR
Exar
Exar's SPX1117M3-L/TR is an adjustable positive single output LDO regulator with a max output current of 0.8A and dropout voltage of 1.3V. Ideal for applications requiring precise voltage regulation in compact spaces, operating at temperatures ranging from -40 to 125°C.
LM1117T-ADJ/NOPB
National
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 1.5 V; No. of Functions: 1; Maximum Dropout Voltage-1: 1.3 V;
LM1117IMPX-ADJ/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Maximum Line Regulation (%/V): .025;
LM1117IMPX-ADJNOPB
LM1117IMPX-ADJNOPB by Onsemi is an adjustable positive single output LDO regulator with a max output current of 0.8A and a max input voltage of 15V. It features a small outline package style, matte tin terminal finish, and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring precise voltage regulation in compact electronic devices.
LM1117IMPX-ADJ/NOPB by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 0.8A and a max input voltage of 15V. It features a small outline package style, operates in temperatures ranging from -40 to 125°C, and has a dropout voltage as low as 1.2V, making it ideal for various applications requiring precise voltage regulation.
LM1117MPX-ADJ/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Adjustability: ADJUSTABLE; Minimum Input-Output Voltage Differential: 1.5 V;
LM1117MPX-ADJNOPB
LM1117MPX-ADJNOPB by Onsemi is an adjustable positive single output LDO regulator with a max output current of 0.8A and a max dropout voltage of 1.2V. It is ideal for applications requiring precise voltage regulation in compact spaces, operating at temperatures ranging from -55 to 150°C.
LM1117MPX-ADJ/NOPB by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 0.8A and a max input voltage of 15V. It features a small outline package style, matte tin terminal finish, and operates in temperatures ranging from 0 to 125°C. Ideal for applications requiring precise voltage regulation in compact electronic devices.
LM1117MP-ADJ/NOPB
LM1117MP-ADJ/NOPB by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 0.8A and a max input voltage of 15V. It features a package style of small outline, making it suitable for surface mount applications in various electronic devices. With a max dropout voltage of 1.3V and operating temperature range from 0 to 125°C, this regulator offers precise voltage regulation for efficient power management.
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Nominal Dropout Voltage-1: 1.2 V; Minimum Output Voltage-1: 1.25 V;
LM1117S-ADJ/NOPB
LM1117S-ADJ/NOPB by Texas Instruments is an adjustable LDO regulator with a max output current of 0.8A and dropout voltage of 1.3V, suitable for applications requiring precise voltage regulation in a compact package. With a wide operating temperature range from 0 to 125°C, it offers stable performance in various environments while maintaining low load and line regulations at ±0.4% and ±0.016%/V respectively.
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Seated Height: 4.8 mm; Width: 8.6 mm;
LM1117IMP-ADJ/NOPB by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 0.8A and a dropout voltage of 1.2V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. The package style is small outline, ideal for surface mount designs with limited space constraints.
LM1117MPX-ADJ
LM1117MPX-ADJ by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 0.8A and a max dropout voltage of 1.3V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; No. of Outputs: 1; Terminal Pitch: 2.3 mm;
LM1117DT-ADJ/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Voltage Tolerance: 3 %; Minimum Output Voltage-1: 1.25 V;
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Dropout Voltage-1: 1.3 V; Maximum Output Voltage-1: 13.8 V;
LM1117DTX-ADJ/NOPB
LM1117DTX-ADJ/NOPB by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 0.8A and a max input-output voltage differential of 13.75V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 13.8 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved