Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LM1117MPX-ADJNOPB by Onsemi is an adjustable positive single output LDO regulator with a max output current of 0.8A and a max dropout voltage of 1.2V. It is ideal for applications requiring precise voltage regulation in compact spaces, operating at temperatures ranging from -55 to 150°C.
Median Price
$0.715
Lifecycle Status
Suppliers In-Stock
42
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.580
100+ parts
$0.321
1k+ parts
$0.298
10k+ parts
-
DigiKey
$0.273
Farnell
$0.836
$0.556
$0.410
$0.354
Texas Instruments
$0.842
$0.648
$0.341
Chip1Stop
$1.030
$0.588
$0.509
$0.456
Newark
$1.070
$0.612
$0.529
Element14
$1.660
$1.080
$0.755
Adafruit Industries
$6.754
$6.416
Arrow
$0.532
Verical
$0.593
$0.531
$0.493
Future Electronics
$0.300
Rochester
$0.594
$0.440
Digiode
$0.450
Ozdisan Elektronik
$0.470
TME
$0.602
$0.527
$0.502
$0.452
Nova Conductors
$0.642
Component Electronics Inc.
$1.150
$0.870
$0.750
Maritex
$1.644
$0.371
$0.224
$0.169
Flip Electronics
Chip Stock
Vyrian
NAC Semi
$0.238
ComSIT Distribution GmbH
EMSNET
Anansix
Prism Electronics
ComSIT USA
Microfarads
Connector Distribution Corp
Right Parts Inc.
Cyclops Electronics Ltd
Semi Source
North Shore Components
Martec Srl
SPM Sales
Pegasus Components GmbH
Semtec, LLC
LWI Electronics Inc
Halfin
Inventory MP
Sea View Technologies
Bristol Electronics
Semicontronic
$0.250
$0.244
$0.242
Ampacity Inc.
Corphita
$0.427
Component Stockers USA
$0.490
$0.350
$0.220
Continental Prestige Electronics
$0.542
Argo Parts USA
$0.526
Bastille Electronics
$0.610
$0.579
$0.571
Netroflash
Corohmni
$3.749
Modulus Dynamics
$4.831
Advanced Electronics
$5.388
$5.119
Parana Technologies
$5.661
$6.458
DigiPath Technology Company
$6.234
$5.735
IDEA Electronic Components Group
$6.361
$5.725
ChromeModa Solutions
$5.216
Perfect Parts
QUARKTWIN TECHNOLOGY LTD
Metaverse IC Inc.
A-Z Elektronik GmbH
Kepictronics
Glotronic Ltd.
Lixinc
Lucentia Tech
$1.243
S.R.D Solutions
iodParts Technologies Inc.
TANS Electronics
Alle Elektronik GmbH
Futuretech Components
Allen Electronics Distributors
Kulean Microsystems
Authorized Procurement Solutions
Infinite Electronics LLP (Excess)
Assy Fe
SupplyDigital Components
Robosynatics
$33.860
Problanco Electronics
UHIMA Technologies
GreenTree Electronics
This material provides durability and protection for the regulator, ensuring reliable performance in various operating conditions.
Low dropout voltage ensures efficient power conversion and minimizes energy loss, making it suitable for applications where power efficiency is crucial.
Facilitates easy and convenient installation on PCBs, saving space and reducing assembly time.
Wide operating temperature range allows the regulator to function reliably in extreme temperature environments.
This large voltage differential capability provides flexibility for various input and output voltage configurations in a circuit.
Rectangular shape allows for efficient placement and mounting on PCBs, optimizing space utilization.
Gull wing terminals offer secure connections and ease of soldering during assembly.
Wide operating temperature range ensures the regulator can operate reliably in harsh cold environments.
TR packing method provides efficient packaging and handling during transportation and storage.
Low minimum output voltage capability makes it suitable for applications requiring precise voltage regulation.
Simple three-terminal design simplifies circuit connections and integration into electronic systems.
Excellent line regulation ensures stable output voltage despite fluctuations in input voltage, guaranteeing consistent performance.
Small outline package style saves board space and allows for compact designs in electronic devices.
Adjustable output voltage provides flexibility for customization and optimization according to specific application requirements.
Low load regulation ensures stable output voltage under varying load conditions, maintaining consistent performance.
High maximum operating temperature rating ensures reliable operation in elevated temperature environments.
Optimal terminal pitch allows for easy connections and compatibility with standard PCB layouts.
Low minimum voltage differential requirement allows for efficient power conversion with minimal energy loss.
Low minimum operating temperature ensures the regulator can start up and function even in cold environments.
Specific regulator type provides accurate and stable output voltage regulation for various electronic applications.
Dual terminal configuration offers flexibility in circuit connections and facilitates easy integration into electronic systems.
High maximum output voltage capability makes it suitable for powering a wide range of electronic devices and components.
Low seated height allows for compact and slim designs in electronic devices, saving space in the overall system.
Narrow width enables the regulator to be easily integrated into tight spaces or densely populated PCB layouts.
High maximum output current capacity allows the regulator to power moderate to high load applications efficiently.
Low nominal dropout voltage minimizes power dissipation and heat generation, improving energy efficiency.
Compact length dimension allows for flexible placement and mounting options in electronic systems.
Adjustable Regulators - Positive Single Output LDO LM1117MPX-ADJNOPB attributes and parameters. Explore more Adjustable Regulators - Positive Single Output LDO devices from Onsemi
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Input-Output Voltage Differential:
Minimum Input-Output Voltage Differential:
JESD-30 Code:
Length:
Maximum Line Regulation (%/V):
Maximum Load Regulation (%):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Regulator Type:
Maximum Seated Height:
Surface Mount:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
LM1117MPX-ADJNOPB Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
1N4148WS
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
SMBJ18CA
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Toshiba
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Dc Components
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
LM358N
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Taiwan Semiconductor
Rectron
1N4148WT
Bytesonic Electronics
LM1085IT-ADJ/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Terminal Pitch: 2.54 mm; Maximum Line Regulation (%/V): .2; Moisture Sensitivity Level (MSL): 1;
LM2931D-R
LM2931D-R by STMicroelectronics is an adjustable positive single output LDO regulator with a max output voltage of 26V and a max load regulation of 2.5%. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
LM1084ISX-ADJ/NOPB
LM1084ISX-ADJ/NOPB by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 5.5A and a max input voltage of 29V. It features a small outline package style, matte tin terminal finish, and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring precise voltage regulation in compact electronic devices.
LP38798SD-ADJ/NOPB
LP38798SD-ADJ/NOPB by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 0.8A and a max input voltage of 20V. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. The package style is small outline, very thin profile, ideal for surface mount designs.
TPS7A8400RGRT
TPS7A8400RGRT by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 3A and a max input voltage of 6.5V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
TPS79301DBVRG4
TPS79301DBVRG4 by Texas Instruments is an adjustable positive single output LDO regulator with a min input voltage of 2.7V and max output current of 0.2A. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
MC33269DTG
MC33269DTG by Onsemi is an adjustable positive single output LDO regulator with a max output current of 0.8A and a dropout voltage of 1.25V. It operates in temperatures ranging from -40 to 150°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
LD1117STR
LD1117STR by STMicroelectronics is an adjustable positive single output LDO regulator with a max output current of 1.3A and a max dropout voltage of 1.2V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
LM2941CSX/NOPB
LM2941CSX/NOPB by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 1A and a dropout voltage of 1V. It operates b/w 0-125°C, making it suitable for various applications requiring stable voltage regulation in compact designs. The package style is small outline, surface mountable, with a terminal pitch of 1.7mm.
TPS7A8500ARGRR
TPS7A8500ARGRR by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 4A and a max input voltage of 6.5V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
ISL80103IRAJZ-T7A
Renesas Electronics
ISL80103IRAJZ-T7A by Renesas Electronics is an adjustable positive single output LDO regulator with a max output current of 3A and a dropout voltage of 0.12V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. The package style is small outline, heat sink/slug, very thin profile, ideal for surface mount assembly with a terminal pitch of 0.5mm.
LT3012EFE#TR
Analog Devices
Analog Devices' LT3012EFE#TR is an adjustable positive single output LDO regulator with a max output voltage of 60V and max dropout voltage of 0.62V. With a compact package style, it is ideal for applications requiring precise voltage regulation in limited space, such as portable electronics or IoT devices.
LT1764EQ#PBF
LT1764EQ#PBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 3A and a max dropout voltage of 0.66V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LM2941LDX
LM2941LDX by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 1A and a dropout voltage of 1V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. Its small outline package style and surface mount capability further enhance its versatility in electronic designs.
LT3080EDD#TRPBF
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HVSON; Terminal Form: NO LEAD; JESD-30 Code: S-PDSO-N8; Technology: BIPOLAR;
LT3012EDE#TRPBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 12; Package Code: VSON; Terminal Form: NO LEAD; JESD-30 Code: R-PDSO-N12; Terminal Finish: Matte Tin (Sn);
LT1085CM#TRPBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Surface Mount: YES; Nominal Dropout Voltage-1: 1.3 V;
LT1963ES8#PBF
Analog Devices' LT1963ES8#PBF is an adjustable positive single output LDO regulator with a max output current of 1.5A and dropout voltage of 0.55V. Ideal for applications requiring precise voltage regulation in a compact package, such as portable electronics or automotive systems.
LT3086HFE#PBF
LT3086HFE#PBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 2.1A and a max dropout voltage of 0.54V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
TPS78101DDCR
TPS78101DDCR by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 0.15A and a min input voltage of 2.2V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. With a small outline package style and surface mount capability, this regulator is ideal for space-constrained designs where efficient power management is crucial.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LM1117IMPX-ADJ/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Maximum Line Regulation (%/V): .025;
LM1117IMPX-ADJNOPB
LM1117IMPX-ADJNOPB by Onsemi is an adjustable positive single output LDO regulator with a max output current of 0.8A and a max input voltage of 15V. It features a small outline package style, matte tin terminal finish, and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring precise voltage regulation in compact electronic devices.
LM1117IMPX-ADJ/NOPB by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 0.8A and a max input voltage of 15V. It features a small outline package style, operates in temperatures ranging from -40 to 125°C, and has a dropout voltage as low as 1.2V, making it ideal for various applications requiring precise voltage regulation.
LM1117MPX-ADJ/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Adjustability: ADJUSTABLE; Minimum Input-Output Voltage Differential: 1.5 V;
LM1117MPX-ADJ/NOPB by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 0.8A and a max input voltage of 15V. It features a small outline package style, matte tin terminal finish, and operates in temperatures ranging from 0 to 125°C. Ideal for applications requiring precise voltage regulation in compact electronic devices.
LM1117MP-ADJ/NOPB
LM1117MP-ADJ/NOPB by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 0.8A and a max input voltage of 15V. It features a package style of small outline, making it suitable for surface mount applications in various electronic devices. With a max dropout voltage of 1.3V and operating temperature range from 0 to 125°C, this regulator offers precise voltage regulation for efficient power management.
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Nominal Dropout Voltage-1: 1.2 V; Minimum Output Voltage-1: 1.25 V;
LM1117S-ADJ/NOPB
LM1117S-ADJ/NOPB by Texas Instruments is an adjustable LDO regulator with a max output current of 0.8A and dropout voltage of 1.3V, suitable for applications requiring precise voltage regulation in a compact package. With a wide operating temperature range from 0 to 125°C, it offers stable performance in various environments while maintaining low load and line regulations at ±0.4% and ±0.016%/V respectively.
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Seated Height: 4.8 mm; Width: 8.6 mm;
LM1117IMP-ADJ/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Time At Peak Reflow Temperature (s): 40; Qualification Status: Not Qualified;
LM1117IMP-ADJ/NOPB by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 0.8A and a dropout voltage of 1.2V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. The package style is small outline, ideal for surface mount designs with limited space constraints.
LM1117MPX-ADJ
LM1117MPX-ADJ by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 0.8A and a max dropout voltage of 1.3V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; No. of Outputs: 1; Terminal Pitch: 2.3 mm;
LM1117DT-ADJ/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Voltage Tolerance: 3 %; Minimum Output Voltage-1: 1.25 V;
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Dropout Voltage-1: 1.3 V; Maximum Output Voltage-1: 13.8 V;
LM1117T-ADJ/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: SFM; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 3 %; Terminal Finish: Matte Tin (Sn);
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 1.5 V; No. of Functions: 1; Maximum Dropout Voltage-1: 1.3 V;
LM1117DTX-ADJ/NOPB
LM1117DTX-ADJ/NOPB by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 0.8A and a max input-output voltage differential of 13.75V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 13.8 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved