Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
INA155U/2K5G4 by Texas Instruments is an instrumentation amplifier with 1000uV max input offset voltage, 0.00001uA max average bias current, and 10-50 voltage gain range. Ideal for military applications due to its -55 to 125 °C operating temperature and MIL-STD packaging.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Chip Stock
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
Parana Technologies
$1.228
$2.012
DigiPath Technology Company
$1.352
$1.244
ChromeModa Solutions
$1.380
$1.132
IDEA Electronic Components Group
$1.242
AZTECH Wire
$8.065
One Stop Electronics
$8.410
Component Stockers USA
$99.990
Microchip USA
Corphita
Plastic/Epoxy package material provides durability and reliable performance in various environmental conditions.
Low input offset voltage ensures accurate signal processing and minimal errors in the output.
Surface mount capability allows for easy and convenient installation on PCBs, saving space and simplifying assembly.
Operates at a standard 5V supply voltage, making it compatible with common power sources.
High maximum operating temperature ensures reliability in demanding industrial and military applications.
CMOS technology provides low power consumption and high noise immunity, enhancing overall performance efficiency.
Specifically designed for precision signal amplification applications, offering high accuracy and stability.
Instrumentation Amplifiers INA155U/2K5G4 attributes and parameters. Explore more Instrumentation Amplifiers devices from Texas Instruments
Amplifier Type:
Technology:
Power Supply:
Total Functions:
Sub-Category:
Nominal Bandwidth (3dB):
Nominal Slew Rate:
Minimum Common Mode Rejection Ratio (CMRR ):
Input Offset Voltage Limit:
Peak Bias Current:
Maximum Bias Current (IIB) @25 °C:
Maximum Supply Current:
Minimum Voltage Gain:
Nominal Voltage Gain:
Maximum Voltage Gain:
Maximum Non Linearity:
Maximum Input Offset Current (IIO):
Nominal Supply Voltage:
Maximum Supply Voltage:
Lowest Operating Temperature:
Maximum Operating Temperature:
Peak Reflow Temperature:
Length:
Width:
Maximum Seated Height:
Total Terminals:
Terminal Pitch:
Terminal Position:
Terminal Form:
Terminal Finish:
Package Body Material:
Surface Mount:
Moisture Sensitivity Level (MSL):
Temperature Grade:
Qualified:
JESD-30 Code:
JESD-609 Code:
Packing Method:
Package Code:
Package Shape:
Package Style:
Package Equivalence Code:
INA155U/2K5G4 Amplifiers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
1N4148
ROHM
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Yageo
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Continental Device India
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
OPA2277UA/2K5
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
Diodes Incorporated
Microsemi
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
Grande Electronics
ATMEGA328P-AU
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Transys Electronics
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
MC7805CTG
Onsemi
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
LT1167IS8#TRPBF
Linear Technology
INSTRUMENTATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LTC2053CDD#PBF
Analog Devices
LTC2053CDD#PBF by Analog Devices is an Instrumentation Amplifier with 20uV Max Input Offset Voltage, 0.01uA Max Average Bias Current, and 0.003uA Max Input Offset Current. Ideal for precision measurement applications due to its low offset voltage and bias current.
AD524CD/+
AD524CD/+ by Analog Devices is an instrumentation amplifier with +-15V power supplies, 16 terminals, and 5mA max supply current. It operates b/w -25°C to 85°C, making it ideal for precision signal processing in industrial automation and sensor applications.
INA118UB/2K5
INA118UB/2K5 by Texas Instruments is an instrumentation amplifier with 100uV max input offset voltage, 0.005uA max average bias current, and 10,000 max voltage gain. Ideal for industrial applications requiring precise signal amplification in a compact package with -40 to 85°C operating temperature range.
LTC2053IMS8#TRPBF
INSTRUMENTATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
INA155UA/2K5
INA155UA/2K5 by Texas Instruments is a CMOS instrumentation amplifier with a max input offset voltage of 1000 uV and a max average bias current of 0.00001 uA. It is commonly used in military applications due to its temperature grade and moisture sensitivity level.
INA321E/2K5
Burr-Brown Corporation
INSTRUMENTATION AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
INA114BU
INA114BU by Texas Instruments is an instrumentation amplifier with 50uV max input offset voltage, 1MHz nominal bandwidth, and 115dB min CMRR. Ideal for industrial applications requiring precise signal amplification in a compact package. Features include +-15V power supplies, 3mA max supply current, and -40 to 85°C operating temperature range.
INA128PA
INA128PA by Texas Instruments is an Instrumentation Amplifier with 1125uV Max Input Offset Voltage, 0.01uA Max Average Bias Current, and 1.3MHz Nominal Bandwidth. Ideal for industrial applications requiring precise signal amplification in a compact package with +-15V Power Supplies and 73dB Min Common Mode Reject Ratio.
LT1789CS8-10
INSTRUMENTATION AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
XTR105UA/2K5E4
XTR105UA/2K5E4 by Texas Instruments is an instrumentation amplifier with a max input offset voltage of 250uV and max average bias current of 0.05uA. It operates at a nominal voltage of 24V, making it suitable for industrial applications requiring precise signal amplification in temperature-sensitive environments. With a compact rectangular package style and surface-mount capability, this amplifier offers high performance in a small footprint.
INA122PA
INA122PA by Texas Instruments is an instrumentation amplifier with a max input offset voltage of 250uV and a nominal voltage of 15V. It has a max bias current of 0.05uA, making it ideal for industrial applications requiring precise signal amplification in temperature-sensitive environments. With a bandwidth of 0.12MHz and high common mode rejection ratio of 83dB, this amplifier ensures accurate data acquisition in various electronic systems.
ISL28635FVZ-T13
Intersil
INSTRUMENTATION AMPLIFIER; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 2; JESD-609 Code: e3; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 30;
AD8222ACPZ-RL
AD8222ACPZ-RL by Analog Devices is an Instrumentation Amplifier with 150uV Max Input Offset Voltage, 1MHz Nominal Bandwidth, and 10000 Max Voltage Gain. Ideal for industrial applications requiring precise signal amplification in a compact chip carrier package with -40 to 85°C operating temperature range.
INA333AIDGKR
INA333AIDGKR by Texas Instruments is an instrumentation amplifier with a max input offset voltage of 25uV, ideal for automotive applications. It has a max average bias current of 0.0002uA and a nominal bandwidth of 0.15MHz, making it suitable for precision signal amplification in tight spaces. With a compact square package shape and surface mount capability, it offers high performance in small outline designs.
AD8253ARMZ-RL
AD8253ARMZ-RL by Analog Devices is an instrumentation amplifier with a max voltage gain of 1000 and bandwidth of 10 MHz. It operates at a nominal voltage of +-15V, with low bias current (0.04uA) making it ideal for industrial applications requiring precise signal amplification in tight spaces. The small outline package (1.1mm seated height) and surface mount capability make it suitable for compact designs where space is limited.
AD8251ARMZ-RL
AD8251ARMZ-RL by Analog Devices is an instrumentation amplifier with a max input offset voltage of 250uV and max average bias current of 0.03uA. It operates at a nominal voltage of 15V, making it suitable for industrial applications requiring precise signal amplification in tight spaces. With a bandwidth of 17MHz and high common mode rejection ratio of 98dB, this CMOS technology-based amplifier is ideal for sensitive measurement tasks.
AD8220BRMZ-RL
AD8220BRMZ-RL by Analog Devices is an instrumentation amplifier with a max input offset voltage of 125uV and a nominal common mode reject ratio of 80dB. It operates at temperatures ranging from -40 to 85°C, making it suitable for industrial applications requiring precise signal amplification in tight spaces. With a low supply current of 0.75mA and compact dimensions (3mm x 3mm), this surface-mountable device is ideal for use in various electronic systems where space and power consumption are critical factors.
INA126E/250
INA126E/250 by Texas Instruments is an instrumentation amplifier with a max input offset voltage of 250uV and max bias current of 0.025uA. It operates at a nominal voltage of 15V, has a bandwidth of 0.2MHz, and is suitable for military-grade applications requiring precise signal amplification in compact spaces.
INA115AU
INA115AU by Texas Instruments is a 16-terminal instrumentation amplifier with a max input offset voltage of 50uV and max supply current of 3mA. Ideal for industrial applications, it offers a nominal bandwidth of 1MHz, high common mode rejection ratio of 115dB, and operates in temperatures ranging from -40 to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
INA118UB
INA118UB by Texas Instruments is an instrumentation amplifier with a max input offset voltage of 100uV and max bias current of 0.005uA. It operates at a nominal voltage of +-15V, has a bandwidth of 0.8MHz, and is ideal for industrial applications requiring precise signal amplification in tight spaces.
INA128UA/2K5
INA128UA/2K5 by Texas Instruments is an instrumentation amplifier with a max voltage gain of 10000 and bandwidth of 1.3 MHz. It operates at temperatures from -40 to 125 °C, making it suitable for automotive applications requiring precise signal amplification in compact spaces. With low bias current and high common mode rejection ratio, it ensures accurate measurements in challenging environments.
INA128UA
INA128UA by Texas Instruments is an instrumentation amplifier with a max voltage gain of 10000 and bandwidth of 1.3 MHz. It operates at temperatures from -40 to 125 °C, making it suitable for automotive applications requiring precise signal amplification in compact spaces. With low bias current and high common mode rejection ratio, it ensures accurate measurements in challenging environments.
INA118UB/2K5G4
INA118UB/2K5G4 by Texas Instruments is an instrumentation amplifier with 100uV max input offset voltage, 0.005uA max average bias current, and 80dB min common mode reject ratio. Ideal for industrial applications requiring precise signal amplification in a compact package with -40 to 85°C operating temperature range.
INA128UAE4
INA128UAE4 by Texas Instruments is an instrumentation amplifier with a max voltage gain of 10000 and bandwidth of 1.3 MHz. It operates at temperatures from -40 to 125 °C, making it suitable for automotive applications requiring precise signal amplification in compact spaces. With low bias current and high Bull Wing terminals, it ensures accurate measurements in harsh environments.
INA121UA
INA121UA by Texas Instruments is an instrumentation amplifier with a max input offset voltage of 500uV, ideal for industrial applications. It offers a max supply current of 0.53mA and a nominal bandwidth of 0.6MHz, making it suitable for precise signal amplification in harsh environments. With a compact rectangular package style and surface mount capability, it provides high performance in a small footprint.
INA118U/2K5
INA118U/2K5 by Texas Instruments is an instrumentation amplifier with a max voltage gain of 10000 and bandwidth of 0.8 MHz. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification in tight spaces. With low bias current and high common mode rejection ratio, it ensures accurate measurements in challenging environments.
INA118U
INA118U by Texas Instruments is an instrumentation amplifier with 225uV max input offset voltage, 0.01uA max average bias current, and 10000 max voltage gain. Ideal for industrial applications requiring precise signal amplification in a compact package with a bandwidth of 0.8MHz.
INA128UA/2K5G4
INA128UA/2K5G4 by Texas Instruments is an instrumentation amplifier with a max input offset voltage of 1125 uV and a max average bias current of 0.01 uA. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
INA128UA/2K5E4
INA128UA/2K5E4 by Texas Instruments is an instrumentation amplifier with a max voltage gain of 10000 and bandwidth of 1.3 MHz. It operates at temperatures ranging from -40 to 125 °C, making it suitable for automotive applications requiring precise signal amplification in compact spaces. With low bias current and high common mode rejection ratio, this IC is ideal for sensitive measurement tasks in harsh environments.
INA128UAG4
INA128UAG4 by Texas Instruments is an instrumentation amplifier with a max input offset voltage of 1125uV and max supply voltage of ±15V. It has a nominal bandwidth of 1.3MHz, making it suitable for automotive applications requiring precise signal amplification in tight spaces. With a compact rectangular package style and low bias current of 0.01uA, it is ideal for high-gain amplification in temperature-sensitive environments.
INA118UG4
INA118UG4 by Texas Instruments is an instrumentation amplifier with a max input offset voltage of 100uV, ideal for industrial applications. It operates at a nominal voltage of +-15V and offers a max voltage gain of 10, with a bandwidth of 0.8MHz. The package style is small outline, making it suitable for surface mount applications.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved