Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SILICON SURGE PROTECTOR; Surface Mount: NO; Maximum Breakdown Voltage: 250 V; Minimum Operating Temperature: -40 Cel; Repetitive Peak Reverse Voltage: 170 V; Maximum On-state Voltage: 10 V;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Silicon Surge Protectors P2103AA60ARP attributes and parameters. Explore more Silicon Surge Protectors devices from Teccor Electronics
Maximum Breakdown Voltage:
Maximum Holding Current:
JESD-609 Code:
Maximum On-state Voltage:
Maximum Operating Temperature:
Minimum Operating Temperature:
Repetitive Peak Reverse Voltage:
Sub-Category:
Surface Mount:
Terminal Finish:
Trigger Device Type:
P2103AA60ARP Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Teccor - Littelfuse Company Overview Teccor Electronics was a manufacturer of semiconductor products for the telecommunications and industrial market segments. The company manufactured two product groups: a line of transient voltage suppressor devices and a line of power switching devices. Tecor Electronics was acquired by Littelfuse in July, 2003. Teccor - Littelfuse Products The types of products manufactured by Teccor - Littelfuse include transient voltage suppressor devices and power switching devices.
2N7002
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
LM317T/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
BAT54SLT1G
Onsemi
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
MBRS360T3G
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
BAV99WT1G
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
DS18B20+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
LL4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Jiangsu Jiejie Microelectronics
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
NP3500GBRLG
NP3500GBRLG by Onsemi is a single silicon surge protector with 2 wire terminals. It has a max DC off-state voltage of 320V and a max breakdown voltage of 400V. This thyristor surge protector is UL recognized and commonly used for isolating case connections in electronic applications.
MMT05B350T3G
The Onsemi MMT05B350T3G is a silicon surge protector with a non-repetitive peak on-state current of 32A. It features a max DC off-state voltage of 300V and operates b/w -40 °C to 125°C. Ideal for protecting electronic devices from power surges in various applications.
TISP4220H3LMFR
Texas Instruments
TISP4220H3LMFR by Texas Instruments is a single silicon surge protector with 60A peak current, 160V DC voltage, and 150°C max temp. Ideal for protecting circuits from surges in applications like power supplies and telecommunications due to its thyristor surge protection design.
DB3
Semiconductors
SILICON SURGE PROTECTOR; Surface Mount: NO; Terminal Finish: Tin/Lead (Sn/Pb); Maximum On-state Voltage: 5 V; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 155 Cel;
PLED9S
Littelfuse
The Littelfuse PLED9S is a single silicon surge protector with a breakdown voltage of 9V and max operating temperature of 150°C. It is surface mountable, UL recognized, and ideal for protecting sensitive electronics from voltage spikes in various applications.
MMT05B310T3
The Onsemi MMT05B310T3 is a silicon surge protector with a max DC off-state voltage of 270V and trigger device type as thyristor. It has a package style of small outline, suitable for surface mount applications. With a max operating temperature of 175 °C, it is ideal for protecting electronic circuits from voltage surges.
SA100-230-3E
STMicroelectronics
SA100-230-3E by STMicroelectronics is a silicon surge protector designed for robust applications. It features a non-repetitive peak on-state current of 30 A, a repetitive peak reverse voltage of 200 V, and operates b/w -40 °C to 80°C. Ideal for protecting sensitive electronics from voltage spikes.
TISP2290L
TISP2290L by Texas Instruments is a silicon surge protector with 3 elements in delta configuration. It has a max breakdown voltage of 290V and can handle non-repetitive peak on-state current of 10A. This device, with through-hole terminals, is ideal for protecting electronic circuits from voltage surges.
P0080SCLRP
THYRISTOR SURGE PROTECTOR; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 40; Qualification: Not Qualified;
ETP01-2821
STMicroelectronics ETP01-2821 is a Silicon Surge Protector with 3 elements, 8 terminals, and max breakdown voltage of 36V. It has a complex configuration, Gull Wing terminal form, and operates b/w -40 °C to 150°C. Ideal for surge protection in various electronic applications.
NP2100SBT3G
NP2100SBT3G by Onsemi is a silicon surge protector with a max DC off-state voltage of 180V and max breakdown voltage of 240V. It is a thyristor surge protector suitable for applications requiring protection against electrical surges. With a small outline package style, it operates in temperatures ranging from -40 °C to 150°C.
P2300SALRP
THYRISTOR SURGE PROTECTOR; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260; Qualification: Not Qualified; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3;
TISP2180F3SL
TISP2180F3SL by Texas Instruments is a silicon surge protector with 3 delta-connected elements. It offers a non-repetitive peak on-state current of 6A and a max DC off-state voltage of 145V. Ideal for applications requiring UL-recognized surge protection in an inline package style.
TISP4070M3LP
TISP4070M3LP by Texas Instruments is a single silicon surge protector with 30A non-repetitive peak on-state current and 70V max breakdown voltage. It features a cylindrical package style, wire terminals, and thyristor surge protection. Ideal for safeguarding electronic devices from voltage spikes in various applications.
NP2300SAMCT3G
NP2300SAMCT3G by Onsemi is a silicon surge protector with 20A non-repetitive peak on-state current. It features a max DC off-state voltage of 190V and trigger device type as thyristor. Ideal for applications requiring protection against voltage surges in electronic circuits.
TISP7290H3SL
TISP7290H3SL by Texas Instruments is a silicon surge protector with 60A peak current, 290V breakdown voltage, and 150°C max operating temp. Ideal for protecting circuits from surges in various applications due to its thyristor surge protector configuration and UL recognition.
P0300SALRP
THYRISTOR SURGE PROTECTOR; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 30;
TISP4070M3LMFR
TISP4070M3LMFR by Texas Instruments is a single silicon surge protector with 32A non-repetitive peak on-state current. It operates b/w -40°C to 150°C, has a max breakdown voltage of 70V, and is UL recognized. Ideal for protecting electronic devices from power surges in various applications.
P1900MEL
The Littelfuse P1900MEL is a single thyristor surge protector with a max breakdown voltage of 220V. It operates in temperatures ranging from -40°C to 150°C and complies with standards like IEC-61000-4-5. Ideal for applications requiring reliable protection against surges in electronic circuits.
TISP4400H3BJ
TISP4400H3BJ by Texas Instruments is a single silicon surge protector with 60A peak current, 275V voltage, and 150°C max temp. Ideal for protecting circuits from surges in various applications due to its thyristor surge protection design and UL recognition.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Teccor Electronics
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved