Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NP2100SBT3G by Onsemi is a silicon surge protector with a max DC off-state voltage of 180V and max breakdown voltage of 240V. It is a thyristor surge protector suitable for applications requiring protection against electrical surges. With a small outline package style, it operates in temperatures ranging from -40 °C to 150°C.
Median Price
$0.267
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$0.277
1k+ parts
$0.230
10k+ parts
$0.205
Verical
$0.257
Vyrian
$0.196
Digiode
$0.217
Chip Stock
Corohmni
Corphita
Advanced Electronics
$5.421
$5.367
$5.150
Kepictronics
Continental Prestige Electronics
SupplyDigital Components
Kulean Microsystems
Problanco Electronics
TANS Electronics
UHIMA Technologies
The use of plastic/epoxy material in the package body provides durability and protection against external elements, making this surge protector suitable for long-term use in various environments.
The single configuration simplifies installation and use, making it ideal for applications where a single surge protection device is needed.
Being surface mountable allows for easy and convenient placement on circuit boards, saving space and facilitating integration into electronic devices.
With a high maximum operating temperature of 150 °C, this surge protector can withstand elevated temperatures, ensuring reliable performance even in demanding conditions.
The use of a thyristor surge protector offers efficient and effective protection against power surges, ensuring the safety of connected devices and equipment.
The high maximum breakdown voltage of 240V ensures that the surge protector can effectively handle voltage spikes and surges, safeguarding connected electronics from damage.
Silicon Surge Protectors NP2100SBT3G attributes and parameters. Explore more Silicon Surge Protectors devices from Onsemi
Maximum Breakdown Voltage:
Configuration:
Maximum DC Off-state Voltage:
Maximum Holding Current:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Reference Standard:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Trigger Device Type:
NP2100SBT3G Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
PCN Obsolescence/ EOL - TSPD Product 07/Sept/2012
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
LL4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
FDLL4148
Onsemi
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
2N2222A
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
SMBJ18CA
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
North American Philips Discrete Products Div
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
1N4148
Multicomp Pro
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
BSS138BK,215
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
LM358AN
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
ULN2803ADWRG4
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
TISP7095H3SL
TISP7095H3SL by Texas Instruments is a silicon surge protector with 3 delta-connected elements. It has a non-repetitive peak on-state current of 60A and max breakdown voltage of 95V. Ideal for protecting electronic devices from power surges, it operates b/w -40°C to 150°C temperature range.
SMP50-320
SMP50-320 by STMicroelectronics is a single silicon surge protector designed for surface mount applications. It features a non-repetitive peak on-state current of 16 A, a repetitive peak reverse voltage of 320 V, and operates within -55 °C to 150°C. Ideal for protecting circuits from voltage spikes, it ensures reliability in compact designs.
TISP5110H3BJ
TISP5110H3BJ by Texas Instruments is a single silicon surge protector with 60A non-repetitive peak current. It operates b/w -40°C to 150°C, has a breakdown voltage of 110V, and holds a max current of 600mA. Ideal for protecting electronic devices from power surges in various applications.
TISP7260F3D
TISP7260F3D by Texas Instruments is a silicon surge protector with 4.3A non-repetitive peak on-state current, 200V max DC off-state voltage, and 260V max breakdown voltage. It is used for surge protection in various applications due to its thyristor surge protector configuration and UL recognized reference standard.
NP1300SAMCT3G
NP1300SAMCT3G by Onsemi is a single silicon surge protector with 20A non-repetitive peak on-state current. It has a max DC off-state voltage of 120V and operates b/w -55 to 150 °C. Ideal for applications requiring protection against surges in electronic circuits.
TISP4125H3LMR
TISP4125H3LMR by Texas Instruments is a single silicon surge protector with a non-repetitive peak on-state current of 60A. It operates b/w -40°C to 150°C, offering protection up to 100V DC off-state voltage. Ideal for applications requiring reliable overvoltage protection using thyristor surge protector technology.
TISP4125H3BJR
TISP4125H3BJR by Texas Instruments is a single silicon surge protector with 60A peak current, 100V DC voltage, and 150°C max temp. Ideal for protecting circuits from surges in various applications like telecommunications and industrial electronics.
TISP4165M3BJR
TISP4165M3BJR by Texas Instruments is a single silicon surge protector with 32A peak current, 135V DC voltage, and 150°C max operating temp. Ideal for protecting circuits from surges in various applications due to its thyristor trigger device type.
TLP200G
TLP200G by STMicroelectronics is a silicon surge protector designed for robust applications. It features a non-repetitive peak on-state current of 31 A, a max breakdown voltage of 290 V, and comes in a compact surface mount package. Ideal for protecting sensitive electronics from voltage spikes.
TISP4250J3BJR-S
Bourns
TISP4250J3BJR-S by Bourns is a single silicon surge protector with a non-repetitive peak on-state current of 50A. It operates b/w -40°C to 150°C, has a max DC off-state voltage of 190V, and features a thyristor surge protector trigger device. Ideal for applications requiring protection against electrical surges in compact spaces.
TISP4260M3LMFR
TISP4260M3LMFR by Texas Instruments is a single silicon surge protector with 32A peak current. It operates b/w -40°C to 150°C, with a breakdown voltage of 260V. Ideal for UL-recognized applications requiring thyristor surge protection in plastic/epoxy packages.
TCS-DL004-500-WH
TCS-DL004-500-WH by Bourns is a silicon surge protector with separate, 2-element configuration. It is surface mountable and has a rectangular package shape. With a max clamping voltage of 40V, it is suitable for applications requiring current suppression and protection against voltage spikes.
TBU-CA025-200-WH
SILICON SURGE PROTECTOR; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 40;
TISP4040H1BJR-S
TISP4040H1BJR-S by Bourns is a single silicon surge protector with a non-repetitive peak on-state current of 50A. It operates b/w -40°C to 150°C, featuring a max breakdown voltage of 40V. Ideal for protecting electronic devices from power surges in various applications.
TISP4095M3BJ
TISP4095M3BJ by Texas Instruments is a single silicon surge protector with 32A peak current, 75V DC voltage, and 150°C max temp. Ideal for protecting circuits from surges in applications like power supplies and telecommunications due to its thyristor surge protection design.
TISP5080H3BJR
TISP5080H3BJR by Texas Instruments is a single silicon surge protector with 60A non-repetitive peak on-state current. It features a plastic/epoxy package body, C bend terminal form, and operates b/w -40°C to 150°C. Ideal for applications requiring protection against voltage surges like power supplies and telecommunications equipment.
TISP4070M3BJR
TISP4070M3BJR by Texas Instruments is a single silicon surge protector with 32A peak current, 58V DC voltage, and 70V breakdown voltage. It is a thyristor surge protector for applications requiring protection against electrical surges in small outline packages. Operating temperature ranges from -40°C to 150°C making it suitable for various electronic devices.
TISP4200M3BJ
TISP4200M3BJ by Texas Instruments is a single silicon surge protector with 32A peak current, 155V DC voltage, and 150°C max temp. Ideal for protecting circuits from surges in applications like power supplies and telecommunications due to its thyristor surge protection design.
SMP100-270H225
STMicroelectronics SMP100-270H225 is a single silicon surge protector with 60A non-repetitive peak current and 230V repetitive peak reverse voltage. Ideal for surface mount applications, it offers a max operating temperature of 150 °C.
TBU-CA065-050-WH
SILICON SURGE PROTECTOR; Maximum Time At Peak Reflow Temperature (s): 40; Moisture Sensitivity Level (MSL): 1; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NP2100SAMCT3G
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; JESD-30 Code: R-PDSO-C2;
NP2100SAT3G
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; JEDEC-95 Code: DO-214AA;
NP2100SBMCT3G
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Terminal Form: C BEND;
NP2100SCMCT3G
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Peak Reflow Temperature (C): 260;
NP2100SCT3G
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Maximum Holding Current: 150 mA;
NP2100SET3G
THYRISTOR SURGE PROTECTOR; Surface Mount: YES; Minimum Operating Temperature: -40 Cel; Maximum Breakdown Voltage: 240 V; Maximum Holding Current: 150 mA; Maximum Operating Temperature: 150 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved