Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
THYRISTOR SURGE PROTECTOR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; JESD-30 Code: O-PBCY-T2;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Kepictronics
1+ parts
100+ parts
1k+ parts
10k+ parts
Authorized Procurement Solutions
Silicon Surge Protectors P0080EC attributes and parameters. Explore more Silicon Surge Protectors devices from Teccor Electronics
Maximum Breakdown Voltage:
Configuration:
Maximum DC Off-state Voltage:
Maximum Holding Current:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Non Repetitive Peak On-state Current:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Qualification:
Repetitive Peak Reverse Voltage:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Trigger Device Type:
P0080EC Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
Teccor - Littelfuse Company Overview Teccor Electronics was a manufacturer of semiconductor products for the telecommunications and industrial market segments. The company manufactured two product groups: a line of transient voltage suppressor devices and a line of power switching devices. Tecor Electronics was acquired by Littelfuse in July, 2003. Teccor - Littelfuse Products The types of products manufactured by Teccor - Littelfuse include transient voltage suppressor devices and power switching devices.
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
LM555CM
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
1554216002
Molex
WIRE AND CABLE;
2N2222A
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
1N4148WT
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
BAV99
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H750VBT6
STMicroelectronics
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
LL4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
SN6505BDBVR
Texas Instruments
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
TISP3095H3SL
TISP3095H3SL by Texas Instruments is a Silicon Surge Protector with 60A peak current, 75V off-state voltage, and 95V breakdown voltage. It is used for surge protection in various applications due to its thyristor trigger device type and series-connected configuration.
NP0640SET3G
NP0640SET3G by Onsemi is a Silicon Surge Protector with THYRISTOR technology. It has a max operating temp of 150 °C, min operating temp of -40°C, and max breakdown voltage of 77V. Ideal for surface mount applications requiring surge protection up to 150mA holding current.
LCP1512
LCP1512 by STMicroelectronics is a Silicon Surge Protector with 15mA DC Gate Trigger Current, 5A Non Repetitive Peak On-state Current, and 150 °C Max Operating Temperature. It is used for surge protection in various applications due to its complex configuration and dual terminal position.
TISP4080H3LPR
TISP4080H3LPR by Texas Instruments is a single silicon surge protector with 60A non-repetitive peak on-state current and 80V max breakdown voltage. It features a cylindrical package style and wire terminals, suitable for protecting electronic devices from power surges in various applications.
NP2100SCT3G
NP2100SCT3G by Onsemi is a single silicon surge protector with 180V DC off-state voltage and 150 °C max operating temp. It features a thyristor surge protector type, suitable for UL-recognized applications requiring protection against voltage spikes in small outline packages.
MMT05A260T3
The Onsemi MMT05A260T3 is a single silicon surge protector with 200V DC off-state voltage and 320V max breakdown voltage. It operates b/w -40 °C to 125°C, making it suitable for protecting electronic devices from power surges in various applications. This surface-mount device features a thyristor surge protector configuration and is UL recognized.
TISP4395M3LM
TISP4395M3LM by Texas Instruments is a single silicon surge protector with 32A peak current. It operates b/w -40°C to 150°C, has 395V breakdown voltage, and UL recognized. Ideal for protecting electronic devices from power surges in various applications.
NP2600SC1T3G
NP2600SC1T3G by Onsemi is a single silicon surge protector with a max DC off-state voltage of 220V and max breakdown voltage of 300V. It operates b/w -40 °C to 125°C, making it suitable for protecting electronic devices from power surges in various applications. This UL recognized thyristor surge protector comes in a small outline package ideal for surface mount installations.
TISP4300M3LP
TISP4300M3LP by Texas Instruments is a single silicon surge protector with 30A non-repetitive peak on-state current and 300V max breakdown voltage. It features a cylindrical package style, wire terminals, and is ideal for protecting electronic devices from power surges in various applications.
TCS-DL004-500-WH
Bourns
TCS-DL004-500-WH by Bourns is a silicon surge protector with separate, 2-element configuration. It is surface mountable and has a rectangular package shape. With a max clamping voltage of 40V, it is suitable for applications requiring current suppression and protection against voltage spikes.
TCM1050P
TCM1050P by Texas Instruments is a Silicon Surge Protector with 5A Non Repetitive Peak On-state Current and 7V Repetitive Peak Reverse Voltage. Its PLASTIC/EPOXY package makes it suitable for surge protection applications in various industries. With a max operating temperature of 85°C, it offers reliable protection against voltage spikes.
NP2100SCMCT3G
NP2100SCMCT3G by Onsemi is a single silicon surge protector with 180V DC off-state voltage. It operates b/w -55 °C to 150°C, featuring a thyristor surge protector trigger device. Ideal for applications requiring UL recognized protection against voltage spikes.
TISP4300H3BJR
TISP4300H3BJR by Texas Instruments is a single silicon surge protector with 60A peak current, 230V DC voltage, and 150°C max temp. Ideal for protecting circuits from surges in applications like power supplies and telecommunications due to its thyristor surge protection design.
TISP3082F3D
TISP3082F3D by Texas Instruments is a Silicon Surge Protector with 4A Non Repetitive Peak On-state Current, 66V Max DC Off-state Voltage, and 82V Max Breakdown Voltage. It is used for surge protection in various applications due to its SERIES CONNECTED configuration and GULL WING terminal form.
TISP4082F3DR
TISP4082F3DR by Texas Instruments is a single silicon surge protector with 4A peak current, 66V DC voltage, and 82V breakdown voltage. Ideal for protecting electronic circuits from power surges in applications like telecommunications equipment due to its UL recognized standards and small outline package style.
SMP100LC-160
Vishay Intertechnology's SMP100LC-160 is a silicon surge protector with 160V repetitive peak reverse voltage and 55A non-repetitive peak on-state current. It features a plastic/epoxy package, C bend terminals, and operates b/w -55°C to 150°C. Ideal for protecting electronic devices from power surges in various applications.
THBT200S
THBT200S by STMicroelectronics is a silicon surge protector designed for robust applications. It features a non-repetitive peak on-state current of 30 A, a repetitive peak reverse voltage of 200 V, and operates b/w -40 °C to 150°C. Ideal for protecting sensitive electronics from voltage spikes.
NP3100SBT3G
The Onsemi NP3100SBT3G is a single silicon surge protector with 275V DC off-state voltage and 150 °C max operating temp. It features a thyristor surge protector trigger device, UL recognized for protection applications in electronics against power surges. The package is small outline, surface mountable with dual terminals and tin finish for robust circuit protection.
TPA130B-12
STMicroelectronics TPA130B-12 is a single silicon surge protector with 30A non-repetitive peak on-state current. It features a plastic/epoxy package, matte tin terminals, and 157V max breakdown voltage. Ideal for surge protection applications in various electronic devices.
TPA110A-12-RL
STMicroelectronics TPA110A-12-RL is a single silicon surge protector with 30A non-repetitive peak on-state current. Its package is made of plastic/epoxy, featuring an axial terminal position. Ideal for applications requiring isolated case connection and max breakdown voltage of 147V.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Teccor Electronics
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved