Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 66100-6 is a crimp terminal for M Series connectors with wire gauge of 16 AWG, rated current of 13A, and contact resistance of 7.5 mohm. It is designed for power and signal applications, featuring a straight mounting style and made of brass material.
Median Price
$1.976
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Farnell
1+ parts
$1.900
100+ parts
$1.610
1k+ parts
$1.440
10k+ parts
-
Arrow
$1.926
$1.622
$1.325
Chip1Stop
$2.026
$1.635
$1.626
DigiKey
$2.770
$2.000
$1.724
Newark
$2.780
$2.090
TE Connectivity
$4.070
$3.710
$3.430
$3.340
Powell Electronics
$4.785
Master Electronics
$1.380
$1.360
Interstate Connecting
$1.471
Verical
$1.623
$1.612
Nova Conductors
$1.026
Component Sense
Electro Sonic
$1.330
$1.230
IBS Electronics
$2.143
$2.101
Vyrian
VNN
Elcom Components
Continental Prestige Electronics
Argo Parts USA
Netroflash
$1.005
$0.975
$0.954
Perfect Parts
These connectors are specifically designed for use in M series applications, ensuring compatibility and optimal performance.
The 30 finish thickness provides durability and protection, making the connectors suitable for various environments and applications.
Crimped terminals provide secure and reliable connections, reducing the risk of loose connections or intermittent signals.
With a high maximum operating temperature of 150°C, these connectors can withstand high heat environments without compromising performance.
The low minimum operating temperature of -55°C ensures that these connectors can be used in extremely cold environments without any issues.
Compatible with 16 AWG wire gauge, these connectors are suitable for a wide range of wiring applications.
With a cross-section area of 1.4 mm2, these connectors can accommodate different wire sizes and types, making them versatile for various setups.
The high rated current of 13 A allows for reliable power and signal transmission, making these connectors ideal for demanding applications.
The machine screw contact style ensures a secure and stable connection, reducing the risk of signal loss or interference.
Constructed from brass, these connectors offer excellent conductivity and durability, ensuring long-lasting performance and reliability.
Assembly Products 66100-6 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Assembly Item Name:
Maximum Cable Entry:
Minimum Cable Entry:
Cable Types:
Connector Accessory Type:
Contact Gender:
Contact Resistance:
Contact Style:
Cross Section Area:
DIN Conformity:
Design:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Terminal Type:
Usage:
Wire Gauge (AWG):
Maximum Wire Size:
Minimum Wire Size:
PCN Design/Specification - 66(0,1)(9,0)(8,9,0) Wire Size 06/Mar/2015
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
2N2222A
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MBRS130LT3G
Onsemi
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
DS18B20Z/T&R
Maxim Integrated
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
SMBJ18CA
Continental Device India
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
LM317T/NOPB
Texas Instruments
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
LM2931Z-5.0RPG
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
1N4148
Baneasa S A
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Vishay Intertechnology
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
SN65HVD234DR
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
1-66103-8
TE Connectivity 1-66103-8 is a CRIMP terminal for CPC/G and M SERIES connectors. With a wire gauge of 20 AWG, it supports up to 13A current. Made of brass, it's ideal for power and signal applications in temperatures ranging from -55 to 90°C.
SPH-004T-P0.5S
J S T Mfg
SPH-004T-P0.5S by J S T Mfg is a CRIMP terminal CONTACT with FEMALE gender and STRAIGHT mounting style. It features SQ PIN-SKT contact style made of BRASS, ideal for assembly products requiring reliable connections in various applications.
9028240000
Weidmueller & Kg
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; Approvals (V): CSA; GOST; Assembly Item Name: FERRULE-STEPPED; DIN Conformity: NO; IEC Conformity: NO;
1393366-1
TE Connectivity's 1393366-1 is a CRIMP terminal with stamped contact design. It supports wire gauge 18 (AWG) and has a rated current of 11A. Ideal for applications requiring a female contact gender, with operating temperatures ranging from -40 to 125°C.
9004440000
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; Assembly Item Name: FERRULE; MIL Conformity: NO; DIN Conformity: NO; Maximum Wire Size: 20 AWG;
13711542
Aptiv
Aptiv 13711542 CONTACT is a MALE CRIMP terminal for FLRY-B cables. Made of COPPER ALLOY, it accepts cable entries from 0.0472" to 0.063". Ideal for automotive wiring harness assemblies.
SEH-001T-P0.6L
SEH-001T-P0.6L by J S T Mfg is a CRIMP terminal with 3A rated current, 20 mohm contact resistance, and 85°C max operating temp. Ideal for applications requiring FEMALE contacts in assemblies with wire sizes ranging from 26 to 22 AWG.
1-487117-1
TE Connectivity 1-487117-1 is an IDC terminal with finish thickness of 30µm. It supports FFC cables, rated for 2A current at -65 to 105°C. Ideal for signal applications, made of phosphor bronze, accommodating up to 0 AWG wire size.
1-205089-1
TE Connectivity's 1-205089-1 CONTACT is a CRIMP terminal with operating temperatures from -55 to 125 °C. It supports wire gauges from 24 to 20 AWG, rated for 7.5A current. Ideal for SIGNAL applications, featuring MALE gender and RND PIN-SKT design in COPPER ALLOY material.
828904-1
TE Connectivity 828904-1 CONTACT features CRIMP terminal type, 0.047" min cable entry, and -40 to 130°C operating temp range. Ideal for applications requiring STRAIGHT mounting style with 0 AWG wire size compatibility.
3047028
Phoenix Contact
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; Assembly Item Name: END COVER; Approvals (V): GOST; MIL Conformity: NO; IEC Conformity: NO;
12048159
The Aptiv 12048159 is a CRIMP CONTACT with MALE gender and BLADE PIN-SOCKET style. It has a min cable entry of 0.08" and max cable entry of 0.123". Ideal for applications requiring straight mounting, such as automotive or industrial assemblies.
15305171
CONNECTOR ACCESSORY; MIL Conformity: NO; DIN Conformity: NO; IEC Conformity: NO; Assembly Item Name: SEAL PLUG;
226537-1
TE Connectivity 226537-1 CONTACT features TPX insulator, 30 finish thickness, and brass material. Ideal for RD 316, RG 161, RG 174 cables with a max wire size of 0 AWG. Designed for power and signal applications with straight mounting style and male contact gender.
1062-16-0622
TE Connectivity's 1062-16-0622 is a CRIMP terminal with stamped contact design. It supports wire gauge 16 AWG, rated for 13A current, and operates b/w -55 to 125 °C. Ideal for applications requiring female contact gender, straight mounting style, and round pin-socket contact design.
AT06-2S-CAP
Amphenol
CONNECTOR ACCESSORY;
SYM-001T-P0.6(N)
SYM-001T-P0.6(N) by J S T Mfg is a CRIMP terminal with approvals from TUV and UL. It supports wire sizes from 28 AWG to 22 AWG, rated for 3A current at 250V AC/DC. Ideal for applications requiring male contacts in straight mounting style with operating temperatures ranging from -25°C to 85°C.
234A061-25/86-0
CONNECTOR ACCESSORY; Minimum Operating Temperature: -75 Cel; Maximum Operating Temperature: 150 Cel; Maximum Wire Size: 0 AWG; Material: ELASTOMER;
0462-203-04141
TE Connectivity's 0462-203-04141 is a female crimp contact with machined design for power applications. It has a rated current of 100A, suitable for wire gauge up to 6 AWG. With operating temperatures ranging from -55°C to 125°C, it is ideal for straight mounting in assembly products.
19620005096
Harting Electronics & Kg
CONNECTOR ACCESSORY; Assembly Item Name: CABLE GLAND; Material: METAL; Minimum Cable Entry: .5512 inch; MIL Conformity: NO; Maximum Cable Entry: .7087 inch;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
66103-4
Tyco Electronics Amp
CONNECTOR ACCESSORY; Rated Current: 13 A; Contact Design: LOOSE; Maximum Wire Size: 20 AWG; Assembly Item Name: CONTACT; Finish Thickness: 30;
TE Connectivity's 66103-4 is a crimp terminal for CPC/G and M series connectors. With a finish thickness of 30, it supports wire gauge from 24 to 20 AWG and rated current up to 13A. Ideal for power and signal applications with male contact gender.
66101-4
TE Connectivity 66101-4 is a CRIMP terminal for CPC/G and M SERIES connectors. With a wire gauge of 16 AWG, it supports a rated current of 13 A. Made of brass, it's designed for power and signal applications with an operating temperature range from -55 to 150 °C.
66101-3
TE Connectivity 66101-3 is a CRIMP terminal for CPC/G and M SERIES connectors. It has a 0.15mm finish thickness, supports wire gauge 16 (1.4 mm2), and rated current of 13A. Ideal for power and signal applications with female contact gender, straight mounting style, and brass material.
66100-9
TE Connectivity 66100-9 is a crimp terminal for CPC/G and M series connectors. It has a wire gauge of 16 AWG, rated current of 13A, and can handle temperatures from -55 to 150°C. Ideal for power and signal applications with female contact gender.
66105-4
TE Connectivity 66105-4 is a crimp terminal for CPC/G and M series connectors. It has a wire gauge of 20 AWG, rated current of 13A, and operates b/w -55 to 150°C. Ideal for power and signal applications with female contact gender.
66104-8
TE Connectivity's 66104-8 is a CRIMP terminal for CPC/G and M SERIES connectors. With a finish thickness of 15, it supports wire gauge from 24 to 20 AWG and rated current up to 13 A. Ideal for power and signal applications with female contact gender, made of brass material.
66100-8
CONNECTOR ACCESSORY; Rated Current: 13 A; Minimum Wire Size: 18 AWG; Maximum Wire Size: 16 AWG; Maximum Operating Temperature: 150 Cel; Wire Gauge (AWG): 16;
66105-3
66105-3 by TE Connectivity is a CONTACT assembly product for CPC/G SERIES/M SERIES CONNECTORS. It has a finish thickness of 0.15 and can handle temperatures ranging from -55 to 150 °C. With a rated current of 13 A, it is suitable for power and signal applications with wire sizes ranging from 24 AWG to 20 AWG.
66102-8
CONNECTOR ACCESSORY; Rated Current: 13 A; Maximum Operating Temperature: 150 Cel; Contact Gender: MALE; Contact Design: STRIP; MIL Conformity: NO;
CONNECTOR ACCESSORY; Rated Current: 13 A; Assembly Item Name: CONTACT; Maximum Operating Temperature: 150 Cel; Contact Gender: MALE; Minimum Cable Entry: .04 inch;
66103-3
CONNECTOR ACCESSORY; Rated Current: 13 A; Maximum Operating Temperature: 150 Cel; Maximum Cable Entry: .08 inch; Wire Gauge (AWG): 20; Additional Features: UNDERPLATING THICKNESS (50), TERMINATION: TIN (50) OVER NICKEL;
CONNECTOR ACCESSORY; Rated Current: 13 A; Wire Gauge (AWG): 20; IEC Conformity: NO; Usage: CPC/G SERIES/M SERIES CONNECTORS; Contact Gender: MALE;
66104-9
CONNECTOR ACCESSORY; Rated Current: 13 A; DIN Conformity: NO; Assembly Item Name: CONTACT; Maximum Operating Temperature: 150 Cel; Minimum Cable Entry: .04 inch;
66104-4
CONNECTOR ACCESSORY; Rated Current: 13 A; Maximum Operating Temperature: 150 Cel; Design: POWER AND SIGNAL; Contact Gender: FEMALE; Cross Section Area: .6 mm2;
66109-3
TE Connectivity 66109-3 is a crimp terminal for CPC/G and M series connectors. It has approvals from CSA and UL, with a rated current of 13A. Made of brass, it operates b/w -55 to 150°C, suitable for wire gauges ranging from 24 to 26 AWG.
CONNECTOR ACCESSORY; Rated Current: 13 A; Finish Thickness: .15; Additional Features: UNDERPLATING THICKNESS (30), TERMINATION: TIN (50) OVER NICKEL; MIL Conformity: NO; Usage: CPC/G SERIES/M SERIES CONNECTORS;
66105-1
CONNECTOR ACCESSORY; Rated Current: 13 A; Minimum Cable Entry: .04 inch; Wire Gauge (AWG): 20; DIN Conformity: NO; Contact Gender: FEMALE;
66103-1
CONNECTOR ACCESSORY; Rated Current: 13 A; Assembly Item Name: CONTACT; Terminal Type: CRIMP; Cable Types: DISCRETE WIRE; Additional Features: UNDERPLATING THICKNESS (50), TERMINATION: GOLD (10) OVER NICKEL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved