Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 66100-8 is a crimp terminal for CPC/G and M series connectors. With a wire gauge of 16 AWG, it supports a rated current of 13A. Made of brass, it is designed for power and signal applications with an operating temperature range from -55 to 150°C.
Median Price
$0.797
Lifecycle Status
Suppliers In-Stock
27
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$0.570
100+ parts
-
1k+ parts
10k+ parts
Farnell
$1.000
$0.840
$0.694
$0.658
Newark
$1.100
Element14
$1.550
$1.250
$0.983
TE Connectivity
$1.870
$1.700
$1.580
$1.540
Powell Electronics
$2.418
TTI
$0.733
Arrow
$0.625
Verical
Heilind Electronics
$0.719
DigiKey
$0.826
Mouser Electronics
$0.830
NEP Electronics
$0.820
$0.760
Master Electronics
$0.703
$0.606
Chip1Stop
$0.727
Interstate Connecting
$0.774
Nova Conductors
$0.669
IBS Electronics
$1.122
$1.024
Electro Sonic
$0.756
$0.673
Rapid Electronics
$0.615
Vyrian
NAC Semi
$0.802
VNN
TME
$0.769
Euro-Tech
ComSIT Distribution GmbH
Bristol Electronics
Semicontronic
$0.459
$0.448
$0.445
Aranea Global
$0.656
$0.630
Argo Parts USA
$0.649
Continental Prestige Electronics
$0.810
Aztec Data Supply Inc.
$5.090
Advanced Electronics
$8.371
$8.287
$7.953
Perfect Parts
Authorized Procurement Solutions
Kepictronics
Resion (Excess)
EMSNET (Excess)
These connectors are specifically designed for CPC/G Series/M Series connectors, ensuring compatibility and reliable performance.
The finish thickness of 15 provides durability and resistance to wear and tear, making the product long-lasting.
Crimp terminals provide a secure and reliable connection, ensuring proper conductivity and reducing the risk of loose connections.
With a maximum operating temperature of 150 °C, this product can withstand high temperatures, making it suitable for various industrial applications.
Support for wire gauge 16 ensures compatibility with a wide range of wire sizes, making it versatile for different wiring setups.
With a rated current of 13 A, this product can handle high current loads, making it suitable for power distribution applications.
The female contact gender ensures compatibility with male connectors, providing a secure and reliable connection.
The power and signal design allows this product to be used for both power delivery and signal transmission, making it versatile for various applications.
Made from brass, this product offers excellent conductivity and durability, ensuring a reliable connection and long-lasting performance.
Assembly Products 66100-8 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Additional Features:
Assembly Item Name:
Maximum Cable Entry:
Minimum Cable Entry:
Cable Types:
Connector Accessory Type:
Contact Gender:
Cross Section Area:
DIN Conformity:
Design:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Terminal Type:
Usage:
Wire Gauge (AWG):
Maximum Wire Size:
Minimum Wire Size:
66100-8 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
PCN Design/Specification - 66(0,1)(9,0)(8,9,0) Wire Size 06/Mar/2015
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
1N4148
Baneasa S A
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
MBRS140T3G
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
TCA6424ARGJR
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
International Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
OPA2277UA
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT2222ALT1G
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
Vicor
NC7WZ17P6X
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
ROHM
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
87421-0000
Molex
Molex 87421-0000 CONTACT features CRIMP terminal type, FEMALE gender, and 0.098" terminal length. Ideal for 26 AWG wire in assembly product applications like 87439 with STRAIGHT mounting style.
282081-1
TE Connectivity 282081-1 is a SEALING ITEM for AMP SUPERSEAL 1.5 SERIES CONNECTORS. With a temp range of -40 to 130°C, it uses SILICONE RUBBER material and supports wire sizes up to 0 AWG.
8655MH0911LF
AMPHENOL ICC
Amphenol Icc's 8655MH0911LF is a ZINC HOOD with #4-40 SCREW mounting. It operates b/w -55 to 125 °C, making it ideal for assembly products requiring durable and secure connections in various temperature conditions.
8599-0720-900
Souriau-sunbank Connection Technologies
CONNECTOR ACCESSORY;
M23053/5-106-9
Sumitomo Electric Industries
ASSEMBLY ITEMS; Construction: SINGLE WALL; MIL Conformity: NO; IEC Conformity: NO; Assembly Item Name: TAPER SLEEVE; DIN Conformity: NO;
HD16-9-1939SE-P080
TE Connectivity's HD16-9-1939SE-P080 is a FEMALE connector with 13A rated current and 250V DC voltage. It has a 0.053" to 0.12" cable entry range, operating from -55°C to 125°C. Ideal for POWER AND SIGNAL applications.
2414-002-1886
CONNECTOR ACCESSORY; Contact Gender: FEMALE; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel; Wire Gauge (AWG): 0; Material: STEEL;
248-501
Wago
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; MIL Conformity: NO; DIN Conformity: NO; Assembly Item Name: MARKING ITEM;
3030336
Phoenix Contact
TERMINAL BLOCK ACCESSORY; Assembly Item Name: JUMPER ITEM; DIN Conformity: NO; IEC Conformity: NO; MIL Conformity: NO;
CP-MSTB
CONNECTOR ACCESSORY; DIN Conformity: NO; IEC Conformity: NO; Assembly Item Name: CODING ITEM; MIL Conformity: NO;
1SNK150051R0000
TERMINAL BLOCK ACCESSORY; Mounting Style: RIGHT ANGLE; Insulator Material: POLYAMIDE; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 110 Cel;
1SET111005R0000
TE Connectivity's 1SET111005R0000 is a STRANDED assembly product with POLYPROPYLENE insulator. It supports up to 17 AWG wire gauge, ideal for DISCRETE WIRE applications. With a max operating temp of 105°C, it offers reliable performance in various straight mounting setups.
13711542
Aptiv
Aptiv 13711542 CONTACT is a MALE CRIMP terminal for FLRY-B cables. Made of COPPER ALLOY, it accepts cable entries from 0.0472" to 0.063". Ideal for automotive wiring harness assemblies.
08-50-0189
Molex 08-50-0189 is a brass contact with crimp terminal type for 20-18 AWG wires. It has a 0.1 inch cable entry and is used in 6442 and 41695 housing assemblies. The bellowed female contact design features a straight mounting style, ideal for various assembly products.
13711546
Aptiv 13711546 CONTACT is a FEMALE CRIMP terminal for FLRY-B cables. Made of COPPER ALLOY, it accepts cable entries from 0.0472" to 0.063". Ideal for automotive wiring harness assembly due to its precise fit and durable material.
WM-12S
TE Connectivity's WM-12S, part of Assembly Products, is designed for DTM SERIES applications. With a temperature range of -55 to 125 °C, it accommodates wires up to 0 AWG. Made of POLYBUTYLENE TEREPHTHALATE, it serves as a POWER AND SIGNAL WEDGE ITEM.
5011933000
Molex 5011933000 is a crimp terminal contact designed for signal applications. It supports wire sizes from 32 AWG to 28 AWG and is made of phosphor bronze. Its female gender makes it suitable for various assembly products in the electronics industry.
M23053/16-003-0
ASSEMBLY ITEMS; Construction: SINGLE WALL; Assembly Item Name: TAPER SLEEVE; DIN Conformity: NO; MIL Conformity: NO; Jacket Material: CROSSLINKED ELASTOMERIC POLYOLEFIN;
0462-201-2031
TE Connectivity's 0462-201-2031 CONTACT features CRIMP terminal type, MACHINED contact design, and COPPER ALLOY material. With a rated current of 7.5A, it is ideal for applications requiring FEMALE contact gender and wire gauge up to 20 AWG. Operating temperature ranges from -55°C to 150°C make it suitable for various assembly products.
3m Electronic Products Division
ASSEMBLY ITEMS; Jacket Material: CROSSLINKED ELASTOMERIC POLYOLEFIN; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: TAPER SLEEVE; Construction: SINGLE WALL;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
66103-4
Tyco Electronics Amp
CONNECTOR ACCESSORY; Rated Current: 13 A; Contact Design: LOOSE; Maximum Wire Size: 20 AWG; Assembly Item Name: CONTACT; Finish Thickness: 30;
TE Connectivity's 66103-4 is a crimp terminal for CPC/G and M series connectors. With a finish thickness of 30, it supports wire gauge from 24 to 20 AWG and rated current up to 13A. Ideal for power and signal applications with male contact gender.
66101-4
TE Connectivity 66101-4 is a CRIMP terminal for CPC/G and M SERIES connectors. With a wire gauge of 16 AWG, it supports a rated current of 13 A. Made of brass, it's designed for power and signal applications with an operating temperature range from -55 to 150 °C.
66101-3
TE Connectivity 66101-3 is a CRIMP terminal for CPC/G and M SERIES connectors. It has a 0.15mm finish thickness, supports wire gauge 16 (1.4 mm2), and rated current of 13A. Ideal for power and signal applications with female contact gender, straight mounting style, and brass material.
66100-9
TE Connectivity 66100-9 is a crimp terminal for CPC/G and M series connectors. It has a wire gauge of 16 AWG, rated current of 13A, and can handle temperatures from -55 to 150°C. Ideal for power and signal applications with female contact gender.
66105-4
TE Connectivity 66105-4 is a crimp terminal for CPC/G and M series connectors. It has a wire gauge of 20 AWG, rated current of 13A, and operates b/w -55 to 150°C. Ideal for power and signal applications with female contact gender.
66104-8
TE Connectivity's 66104-8 is a CRIMP terminal for CPC/G and M SERIES connectors. With a finish thickness of 15, it supports wire gauge from 24 to 20 AWG and rated current up to 13 A. Ideal for power and signal applications with female contact gender, made of brass material.
66105-3
66105-3 by TE Connectivity is a CONTACT assembly product for CPC/G SERIES/M SERIES CONNECTORS. It has a finish thickness of 0.15 and can handle temperatures ranging from -55 to 150 °C. With a rated current of 13 A, it is suitable for power and signal applications with wire sizes ranging from 24 AWG to 20 AWG.
66102-8
CONNECTOR ACCESSORY; Rated Current: 13 A; Maximum Operating Temperature: 150 Cel; Contact Gender: MALE; Contact Design: STRIP; MIL Conformity: NO;
CONNECTOR ACCESSORY; Rated Current: 13 A; Assembly Item Name: CONTACT; Maximum Operating Temperature: 150 Cel; Contact Gender: MALE; Minimum Cable Entry: .04 inch;
66103-3
CONNECTOR ACCESSORY; Rated Current: 13 A; Maximum Operating Temperature: 150 Cel; Maximum Cable Entry: .08 inch; Wire Gauge (AWG): 20; Additional Features: UNDERPLATING THICKNESS (50), TERMINATION: TIN (50) OVER NICKEL;
CONNECTOR ACCESSORY; Rated Current: 13 A; Wire Gauge (AWG): 20; IEC Conformity: NO; Usage: CPC/G SERIES/M SERIES CONNECTORS; Contact Gender: MALE;
66104-9
CONNECTOR ACCESSORY; Rated Current: 13 A; DIN Conformity: NO; Assembly Item Name: CONTACT; Maximum Operating Temperature: 150 Cel; Minimum Cable Entry: .04 inch;
66104-4
CONNECTOR ACCESSORY; Rated Current: 13 A; Maximum Operating Temperature: 150 Cel; Design: POWER AND SIGNAL; Contact Gender: FEMALE; Cross Section Area: .6 mm2;
66109-3
TE Connectivity 66109-3 is a crimp terminal for CPC/G and M series connectors. It has approvals from CSA and UL, with a rated current of 13A. Made of brass, it operates b/w -55 to 150°C, suitable for wire gauges ranging from 24 to 26 AWG.
CONNECTOR ACCESSORY; Rated Current: 13 A; Finish Thickness: .15; Additional Features: UNDERPLATING THICKNESS (30), TERMINATION: TIN (50) OVER NICKEL; MIL Conformity: NO; Usage: CPC/G SERIES/M SERIES CONNECTORS;
66105-1
CONNECTOR ACCESSORY; Rated Current: 13 A; Minimum Cable Entry: .04 inch; Wire Gauge (AWG): 20; DIN Conformity: NO; Contact Gender: FEMALE;
66100-6
TE Connectivity's 66100-6 is a crimp terminal for M Series connectors with wire gauge of 16 AWG, rated current of 13A, and contact resistance of 7.5 mohm. It is designed for power and signal applications, featuring a straight mounting style and made of brass material.
66103-1
CONNECTOR ACCESSORY; Rated Current: 13 A; Assembly Item Name: CONTACT; Terminal Type: CRIMP; Cable Types: DISCRETE WIRE; Additional Features: UNDERPLATING THICKNESS (50), TERMINATION: GOLD (10) OVER NICKEL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved