Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 66103-1 is a CRIMP CONTACT for CPC/G and M SERIES connectors. It has a finish thickness of 30, supports wire gauge from 24 to 20 AWG, and rated current of 13A. Ideal for power and signal applications with male contact gender.
Median Price
$1.846
Lifecycle Status
Suppliers In-Stock
33
In-Stock Inventory
1k+
Heilind Electronics
1+ parts
$1.042
100+ parts
-
1k+ parts
$0.965
10k+ parts
Avnet
$1.156
Chip1Stop
$1.340
$1.010
Powell Electronics
$1.658
$1.564
Interstate Connecting
$1.675
$1.364
$1.326
RS Americas
$1.820
$1.430
$1.270
TE Connectivity
$2.430
$2.250
$2.120
$1.990
DigiKey
$2.450
$1.766
$1.501
$1.389
Conrad
$2.481
$2.221
RS (Exports)
$2.500
$1.970
Newark
$2.970
$2.300
Element14
$3.040
$2.200
$2.060
Master Electronics
$1.590
$1.360
$1.290
Verical
$1.871
$1.600
TTI
$1.620
Farnell
$1.940
$1.700
Electro Enterprises
$2.264
$1.741
$1.617
FDH Electronics
$2.642
$2.402
$2.033
$1.887
IBS Electronics
$2.143
$1.847
$1.593
Electro Sonic
$1.190
$1.090
Lakeview Electronics
Nova Conductors
VNN
Prism Electronics
Sunrise Surplus Inc.
PAR Electronics
Electronics Depot
American Connector Supply Corp
Van Brakel Electronic
EPE Components Inc.
Bristol Electronics
Elcom Components
Hawk Electronics
Semicontronic
$0.890
$0.868
$0.863
CoreStaff
$2.528
$0.994
$0.947
Authorized Procurement Solutions
Argo Parts USA
Perfect Parts
Assy Fe
Aranea Global
Continental Prestige Electronics
This product is compatible with a wide range of connectors, providing versatility in various applications.
The 30 finish thickness ensures durability and longevity of the product, making it reliable for long-term use.
Crimp terminals are known for their secure connections, ensuring stable and reliable performance.
With a maximum operating temperature of 150°C, this product can withstand high temperatures without compromising its functionality.
The product can operate effectively even in extreme cold temperatures as low as -55°C, making it suitable for various environments.
With a wire gauge of 20 AWG, this product is capable of handling higher electrical currents, making it ideal for power and signal applications.
The cross-section area of 0.6 mm2 allows for efficient flow of current, ensuring optimal performance of the product.
With a rated current of 13 A, this product can handle higher currents, making it suitable for power applications.
The male contact gender ensures compatibility with female connectors, providing a secure and reliable connection.
Brass material offers excellent conductivity and durability, ensuring long-lasting performance of the product.
Assembly Products 66103-1 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Additional Features:
Assembly Item Name:
Maximum Cable Entry:
Minimum Cable Entry:
Cable Types:
Connector Accessory Type:
Contact Gender:
Cross Section Area:
DIN Conformity:
Design:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Terminal Type:
Usage:
Wire Gauge (AWG):
Maximum Wire Size:
Minimum Wire Size:
66103-1 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
1N4148
Shenzhen Yixinsemi Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRCW04020000Z0EDHP
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
MBRS130LT3G
Onsemi
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
LL4148
Panjit International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
350766-1
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
North American Philips Discrete Products Div
ULN2803A
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
16-02-0097
Molex
CONNECTOR ACCESSORY;
747540101
CONNECTOR ACCESSORY; IEC Conformity: NO; Assembly Item Name: CAGE ASSEMBLY; MIL Conformity: NO; Material: COPPER ALLOY; DIN Conformity: NO;
7824.6925.0
350551-6
The TE Connectivity 350551-6 is a universal mate-n-lok plug/socket housing with stranded construction and crimp terminals. Rated for 600V AC/DC, it has a max temp of 105°C and min temp of -55°C. With approvals from CSA and VDE, it's ideal for power applications with wire sizes ranging from 20-14 AWG.
M23053/5-111-9
Sumitomo Electric Industries
ASSEMBLY ITEMS; IEC Conformity: NO; Construction: SINGLE WALL; MIL Conformity: NO; DIN Conformity: NO; Assembly Item Name: TAPER SLEEVE;
213823-2
TE Connectivity 213823-2 is a RECEPTACLE with Shell Size of 14. It has Max Operating Temp of 105°C and Min Operating Temp of -55°C. Made of ZINC ALLOY, it supports wire size up to 0 AWG, ideal for assembly applications.
33011-3002
FMK2G-K201
Fct Electronic
CONNECTOR ACCESSORY; MIL Conformity: NO; DIN Conformity: NO; Maximum Operating Temperature: 100 Cel; Assembly Item Name: HOOD; Material: ZINC;
39-00-0073
Molex 39-00-0073 is a POWER CONTACT with FEMALE gender, SQUARE PIN-SOCKET style. Made of BRASS material, it has a 0.169" terminal length and supports wire sizes from 24 AWG to 18 AWG. Ideal for use with 5557, 30067, 44516 or 42474 HOUSING assemblies.
PCS-E36LKPB
Honda Tsushin Kogyo
CONNECTOR ACCESSORY; Mounting Option-1: M2.5; Material: ZINC ALLOY; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: PROTECTIVE COVER;
42815-0012
Molex 42815-0012 CONTACT features CRIMP terminal for 12-10 AWG wires. Made of COPPER ALLOY, it has 0.209" cable entry and suits FEMALE connectors in STRAIGHT mount. Ideal for applications requiring durable bellowed-type contacts with 30 finish thickness.
293734-1
CONNECTOR ACCESSORY; Minimum Operating Temperature: -20 Cel; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 85 Cel; Wire Gauge (AWG): 0; Design: POWER;
776363-1
CONNECTOR ACCESSORY; Maximum Operating Temperature: 125 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -40 Cel;
KT0009
Bulgin
CONNECTOR ACCESSORY; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: RETAINER CLIP; IEC Conformity: NO; Material: STEEL;
7810.6412.0
CC79L-2024-01-L
Samtec
The Samtec CC79L-2024-01-L contact features a loose design with finish thickness of 10. Made of phosphor bronze, it accommodates wire sizes ranging from 20 AWG to 24 AWG. Ideal for assembly products, this contact is suitable for various applications requiring reliable electrical connections.
1SNK900618R0000
TERMINAL BLOCK ACCESSORY; Wire Gauge (AWG): 0; Insulator Material: POLYCARBONATE; Maximum Operating Temperature: 110 Cel; Minimum Operating Temperature: -55 Cel; Maximum Wire Size: 0 AWG;
206138-8
TE Connectivity's 206138-8 cable clamp has UL approval, shell size of 23, and max wire size of 0 AWG. It is made of polyethylene and mounts straight with a screw option. Ideal for securing cables in various assemblies.
936012574
4-745130-5
CONNECTOR ACCESSORY; Shielding: YES; Wire Gauge (AWG): 0; MIL Conformity: NO; DIN Conformity: NO; Maximum Wire Size: 0 AWG;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
66103-4
Tyco Electronics Amp
CONNECTOR ACCESSORY; Rated Current: 13 A; Contact Design: LOOSE; Maximum Wire Size: 20 AWG; Assembly Item Name: CONTACT; Finish Thickness: 30;
TE Connectivity's 66103-4 is a crimp terminal for CPC/G and M series connectors. With a finish thickness of 30, it supports wire gauge from 24 to 20 AWG and rated current up to 13A. Ideal for power and signal applications with male contact gender.
66101-4
TE Connectivity 66101-4 is a CRIMP terminal for CPC/G and M SERIES connectors. With a wire gauge of 16 AWG, it supports a rated current of 13 A. Made of brass, it's designed for power and signal applications with an operating temperature range from -55 to 150 °C.
66101-3
TE Connectivity 66101-3 is a CRIMP terminal for CPC/G and M SERIES connectors. It has a 0.15mm finish thickness, supports wire gauge 16 (1.4 mm2), and rated current of 13A. Ideal for power and signal applications with female contact gender, straight mounting style, and brass material.
66100-9
TE Connectivity 66100-9 is a crimp terminal for CPC/G and M series connectors. It has a wire gauge of 16 AWG, rated current of 13A, and can handle temperatures from -55 to 150°C. Ideal for power and signal applications with female contact gender.
66105-4
TE Connectivity 66105-4 is a crimp terminal for CPC/G and M series connectors. It has a wire gauge of 20 AWG, rated current of 13A, and operates b/w -55 to 150°C. Ideal for power and signal applications with female contact gender.
66104-8
TE Connectivity's 66104-8 is a CRIMP terminal for CPC/G and M SERIES connectors. With a finish thickness of 15, it supports wire gauge from 24 to 20 AWG and rated current up to 13 A. Ideal for power and signal applications with female contact gender, made of brass material.
66100-8
CONNECTOR ACCESSORY; Rated Current: 13 A; Minimum Wire Size: 18 AWG; Maximum Wire Size: 16 AWG; Maximum Operating Temperature: 150 Cel; Wire Gauge (AWG): 16;
66105-3
66105-3 by TE Connectivity is a CONTACT assembly product for CPC/G SERIES/M SERIES CONNECTORS. It has a finish thickness of 0.15 and can handle temperatures ranging from -55 to 150 °C. With a rated current of 13 A, it is suitable for power and signal applications with wire sizes ranging from 24 AWG to 20 AWG.
66102-8
CONNECTOR ACCESSORY; Rated Current: 13 A; Maximum Operating Temperature: 150 Cel; Contact Gender: MALE; Contact Design: STRIP; MIL Conformity: NO;
CONNECTOR ACCESSORY; Rated Current: 13 A; Assembly Item Name: CONTACT; Maximum Operating Temperature: 150 Cel; Contact Gender: MALE; Minimum Cable Entry: .04 inch;
66103-3
CONNECTOR ACCESSORY; Rated Current: 13 A; Maximum Operating Temperature: 150 Cel; Maximum Cable Entry: .08 inch; Wire Gauge (AWG): 20; Additional Features: UNDERPLATING THICKNESS (50), TERMINATION: TIN (50) OVER NICKEL;
CONNECTOR ACCESSORY; Rated Current: 13 A; Wire Gauge (AWG): 20; IEC Conformity: NO; Usage: CPC/G SERIES/M SERIES CONNECTORS; Contact Gender: MALE;
66104-9
CONNECTOR ACCESSORY; Rated Current: 13 A; DIN Conformity: NO; Assembly Item Name: CONTACT; Maximum Operating Temperature: 150 Cel; Minimum Cable Entry: .04 inch;
66104-4
CONNECTOR ACCESSORY; Rated Current: 13 A; Maximum Operating Temperature: 150 Cel; Design: POWER AND SIGNAL; Contact Gender: FEMALE; Cross Section Area: .6 mm2;
66109-3
TE Connectivity 66109-3 is a crimp terminal for CPC/G and M series connectors. It has approvals from CSA and UL, with a rated current of 13A. Made of brass, it operates b/w -55 to 150°C, suitable for wire gauges ranging from 24 to 26 AWG.
CONNECTOR ACCESSORY; Rated Current: 13 A; Finish Thickness: .15; Additional Features: UNDERPLATING THICKNESS (30), TERMINATION: TIN (50) OVER NICKEL; MIL Conformity: NO; Usage: CPC/G SERIES/M SERIES CONNECTORS;
66105-1
CONNECTOR ACCESSORY; Rated Current: 13 A; Minimum Cable Entry: .04 inch; Wire Gauge (AWG): 20; DIN Conformity: NO; Contact Gender: FEMALE;
66100-6
TE Connectivity's 66100-6 is a crimp terminal for M Series connectors with wire gauge of 16 AWG, rated current of 13A, and contact resistance of 7.5 mohm. It is designed for power and signal applications, featuring a straight mounting style and made of brass material.
66100-4
CONNECTOR ACCESSORY; Rated Current: 13 A; IEC Conformity: NO; Material: BRASS; Minimum Operating Temperature: -55 Cel; Mounting Style: STRAIGHT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved