Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 202K132-25/225-0 heat shrink features ELASTOMER jacket material, -75 to 150°C operating temp range, and accommodates up to 0 AWG wire. Ideal for applications requiring a min cable entry of 5.9" and max of 15".
Median Price
$16.628
Lifecycle Status
Suppliers In-Stock
36
In-Stock Inventory
1k+
WireMasters
1+ parts
$11.398
100+ parts
$10.782
1k+ parts
$9.277
10k+ parts
-
Farnell
$15.260
$10.390
$9.840
Interstate Connecting
$15.841
$12.899
$12.541
Heilind Electronics
$16.132
$12.954
$12.761
AE Petsche
$16.385
Avnet
$16.871
$12.395
$10.175
RS (Exports)
$16.928
$14.476
TTI
$17.100
$14.650
$13.600
TE Connectivity
$18.190
RS Americas
$19.660
$16.510
Newark
$20.090
$14.400
$14.310
Master Electronics
$21.600
$13.020
$12.470
Element14
$24.810
$19.550
Adafruit Industries
$61.800
$58.710
Verical
$15.694
Powell Electronics
$14.490
$10.540
DigiKey
$15.780
March Electronics
Chip1Stop
$16.200
Nova Conductors
$11.310
Electro Enterprises
$21.975
$18.702
$15.155
FDH Electronics
$23.550
$20.043
$16.241
IBS Electronics
$26.507
$20.547
$20.448
Vyrian
VNN
ACDS - Activité Composants Distribution Service
American Connector Supply Corp
Quittner & Schimek s.r.o.
Electro Mavin
Rapid Electronics
Kallista Electronics Ltd
LIBRA Elektronik GmbH
Mil-Aero Solutions, Inc.
Beltway Electronics Company
ABC Electronics Ltd.
Q Components
Semicontronic
$9.690
$9.448
$9.399
Aranea Global
$11.084
$10.640
Continental Prestige Electronics
$11.950
$9.650
Modulus Dynamics
$12.160
$12.038
$11.674
Advanced Electronics
Neutron USA
$88.990
Authorized Procurement Solutions
Infinite Electronics LLP (Excess)
Argo Parts USA
Perfect Parts
Robosynatics
$0.053
Lucentia Tech
Assy Fe
ELASTOMER jacket material provides flexibility and durability, making the product suitable for various applications and environments.
Allows for easy installation of cables with a minimum diameter of 5.9 inches, accommodating a wide range of cable sizes.
With a high maximum operating temperature of 150°C, this product can withstand heat effectively, ensuring reliable performance in hot conditions.
The product can operate in extremely cold temperatures as low as -75°C, making it suitable for use in harsh and cold environments.
Supports wire sizes up to 0 AWG, allowing for compatibility with a wide range of wires and cables.
Provides a large cable entry of up to 15 inches, accommodating bulky cables and making installation easier for larger cable sizes.
The use of ELASTOMER material ensures flexibility, strength, and resistance to various environmental factors, making the product a durable and reliable choice.
Heat Shrinks 202K132-25/225-0 attributes and parameters. Explore more Heat Shrinks devices from TE Connectivity
Maximum Cable Entry:
Minimum Cable Entry:
Connector Accessory Type:
Jacket Material:
Material:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Wire Size:
PCN Design/Specification - Multiple Drawings Ordering Information Descriptions 27/Oct/2018
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
1N4148WS
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Taitron Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
BAV99
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
BAV99WT1G
Fairchild Semiconductor
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
1N4148
Panjit International
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
International Semiconductor
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
CC0603KRX7R9BB103
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ATUM-12/3-0-STK-CS7408
HEAT SHRINK TUBE; Construction: DUAL WALL; Jacket Material: POLYOLEFIN;
202K142-25-01-0
TE Connectivity's 202K142-25-01-0 heat shrink features ELASTOMER jacket material, -75 to 150 °C operating temp range, and fits cables up to 17" in diameter. Ideal for applications requiring durable cable protection with a wide temperature tolerance.
VERSAFIT-3/64-0-STK
HEAT SHRINK TUBE; Construction: SINGLE WALL; Jacket Material: IRRADIATED MODIFIED POLYOLEFIN; Additional Features: REFERENCE STANDARD: CSA; UL;
M23053/16-006-0
Ls Cable & System
HEAT SHRINK TUBE; Assembly Item Name: TAPER SLEEVE; Jacket Material: ELASTOMER POLYOLEFIN; Construction: SINGLE WALL; IEC Conformity: NO; DIN Conformity: NO;
FIT-221-1/4WH103
Alpha Wire
HEAT SHRINK TUBE; Jacket Material: POLYOLEFIN;
CGPT-6/2-0-SP
HEAT SHRINK TUBE; Wire Gauge (AWG): 0; Minimum Operating Temperature: -40 Cel; Construction: SINGLE WALL; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 135 Cel;
462A034-100-0
HEAT SHRINK BOOT; Construction: DUAL WALL; Minimum Operating Temperature: -30 Cel; Maximum Operating Temperature: 105 Cel;
RNF-100-3/8-0-FSP
HEAT SHRINK TUBE; Additional Features: APPROVAL: VDE; Construction: SINGLE WALL; Jacket Material: POLYOLEFIN; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 135 Cel;
202K121-25-G38/225-0
HEAT SHRINK BOOT; Minimum Operating Temperature: -75 Cel; Maximum Wire Size: 0 AWG; Jacket Material: ELASTOMER; Material: ELASTOMER; Maximum Operating Temperature: 150 Cel;
202A142-100/180-0
HEAT SHRINK BOOT; Maximum Operating Temperature: 105 Cel; Minimum Operating Temperature: -30 Cel; Maximum Cable Entry: 1 inch; Maximum Wire Size: 0 AWG; Minimum Cable Entry: .291 inch;
ATUM-12/3-0-STK
HEAT SHRINK TUBE; Jacket Material: POLYOLEFIN; Construction: SINGLE WALL;
S02-08-R-93
HEAT SHRINK SOLDER SLEEVE; Diameter: 4.3 mm; Maximum Wire Size: 0 AWG; Construction: SINGLE WALL; Terminal Type: SOLDER;
M23053/5-103-0
Insultab
HEAT SHRINK TUBE; DIN Conformity: NO; IEC Conformity: NO; Jacket Material: CROSSLINKED POLYOLEFIN; Assembly Item Name: TAPER SLEEVE; MIL Conformity: NO;
S03-03-R
HEAT SHRINK SOLDER SLEEVE; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 150 Cel; Jacket Material: CROSSLINKED MODIFIED POLYVINYLIDENE FLUORIDE; Diameter: 5.08 mm; Construction: SINGLE WALL;
202K153-25-01-0
TE Connectivity's 202K153-25-01-0 heat shrink features ELASTOMER jacket material, -75 to 150°C operating temp range, and fits cables up to 20" with 0 AWG wire size. Ideal for applications requiring durable cable protection in extreme temperature environments.
S02-17-R-90
HEAT SHRINK SOLDER SLEEVE; Construction: SINGLE WALL; Diameter: 2.65 mm; Maximum Wire Size: 0 AWG; Terminal Type: SOLDER;
ES1000-NO.2-B9-X-STK
HEAT SHRINK TUBE; Minimum Operating Temperature: -40 Cel; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 130 Cel; Construction: DUAL WALL;
417597N002
HEAT SHRINK BOOT; Jacket Material: SEMI-RIGID POLYOLEFIN; Minimum Operating Temperature: -55 Cel; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 135 Cel; Material: POLYOLEFIN;
VERSAFIT-1-1/2-0-SP
HEAT SHRINK TUBE; Additional Features: REFERENCE STANDARD: CSA; UL; Construction: SINGLE WALL; Jacket Material: IRRADIATED MODIFIED POLYOLEFIN;
13736
Pro-power
HEAT SHRINK TUBE; Construction: SINGLE WALL; Jacket Material: POLYOLEFIN;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
202K121-25/225-0
TE Connectivity's 202K121-25/225-0 heat shrink features ELASTOMER jacket material, -75 to 150 °C operating temp range, and fits cables up to 0 AWG. Ideal for applications requiring a min cable entry of 5.6 inch and max of 14 inch.
202K121-25-01/225-0
TE Connectivity's 202K121-25-01/225-0 heat shrink features dual wall construction with elastomer jacket material. It has a max operating temp of 150°C and min cable entry of 5.6". Ideal for applications requiring durable insulation in extreme temperature environments.
202K132-25-0
TE Connectivity's 202K132-25-0 heat shrink features single wall construction with elastomer jacket material. It has a max operating temp of 150°C and min cable entry of 5.9". Ideal for applications requiring -75 to 150°C range, accommodating up to 0 AWG wire size in a 15" cable entry space.
202K121-25/225-0-CS6939
HEAT SHRINK BOOT; Construction: DUAL WALL; Jacket Material: ELASTOMER;
202K1322501-225-0
TE Connectivity's 202K1322501-225-0 heat shrink features dual wall construction with elastomer jacket material. It offers a wide temperature range from -75°C to 150°C, accommodating wire sizes up to 0 AWG. Ideal for applications requiring a min cable entry of 5.9" and max of 15".
202K132-25-01/86-0
TE Connectivity's 202K132-25-01/86-0 heat shrink features dual wall construction with elastomer jacket material. It has a min cable entry of 5.9" and can withstand temperatures from -75°C to 150°C. Ideal for applications requiring protection and insulation for cables up to 0 AWG size with a max cable entry of 15".
202K121-25-01/86-0
TE Connectivity's 202K121-25-01/86-0 heat shrink features ELASTOMER jacket material, -75 to 150°C operating temp range, and fits cables up to 14" with a min entry of 5.6". Ideal for electrical insulation in various applications.
202K142-25-01/86-0
TE Connectivity's 202K142-25-01/86-0 heat shrink features ELASTOMER jacket material, -75 to 150°C temp range, and fits cables up to 17" with 0 AWG wire size. Ideal for electrical insulation in various applications.
202K121-25-0
TE Connectivity's 202K121-25-0 heat shrink features single wall construction with elastomer jacket material. It has a max operating temp of 150°C and min operating temp of -75°C. Ideal for applications requiring a min cable entry of 5.6" and accommodating up to 0 AWG wire size.
202K142-25/225-0
TE Connectivity's 202K142-25/225-0 heat shrink features ELASTOMER jacket material, -75 to 150 °C operating temp range, and fits cables up to 0 AWG. Ideal for applications requiring a min cable entry of 7.1 inches and max of 17 inches.
202K142-25-0
HEAT SHRINK BOOT; Maximum Operating Temperature: 150 Cel; Material: ELASTOMER; Minimum Cable Entry: 7.1 inch; Construction: SINGLE WALL; Jacket Material: ELASTOMER;
202K142-25-01/225-0
HEAT SHRINK BOOT; Minimum Operating Temperature: -75 Cel; Material: ELASTOMER; Maximum Wire Size: 0 AWG; Minimum Cable Entry: 7.1 inch; Maximum Operating Temperature: 150 Cel;
HEAT SHRINK BOOT; Maximum Wire Size: 0 AWG; Minimum Cable Entry: 7.1 inch; Maximum Operating Temperature: 150 Cel; Jacket Material: ELASTOMER; Material: ELASTOMER;
202K121-25-01-0
HEAT SHRINK BOOT; Minimum Cable Entry: 5.6 inch; Minimum Operating Temperature: -75 Cel; Material: ELASTOMER; Maximum Operating Temperature: 150 Cel; Maximum Cable Entry: 14 inch;
202K142-25-00-0
HEAT SHRINK BOOT; Material: ELASTOMER; Jacket Material: ELASTOMER; Minimum Operating Temperature: -75 Cel; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 150 Cel;
202K132-25-G03/86-0
HEAT SHRINK BOOT; Material: ELASTOMER; Maximum Operating Temperature: 150 Cel; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -75 Cel; Jacket Material: ELASTOMER;
202K121-25-01/42-0
HEAT SHRINK BOOT; Jacket Material: ELASTOMER; Material: ELASTOMER; Minimum Operating Temperature: -75 Cel; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 150 Cel;
202K153-25/225-0
TE Connectivity's 202K153-25/225-0 heat shrink features dual wall construction with elastomer jacket material. It has a max operating temp of 150°C and min operating temp of -75°C, suitable for cables up to 0 AWG size. Ideal for applications requiring a min cable entry of 8.4 inches and max cable entry of 20 inches.
202K153-25-01/225-0
TE Connectivity's 202K153-25-01/225-0 heat shrink features ELASTOMER jacket material, -75 to 150°C operating temp range, and fits cables up to 20" in diameter. Ideal for applications requiring protection and insulation of large cables with a min entry of 8.4".
202K132-25/225-CS-1858-0
HEAT SHRINK BOOT; Jacket Material: ELASTOMER; Maximum Operating Temperature: 150 Cel; Maximum Wire Size: 0 AWG; Material: ELASTOMER; Minimum Operating Temperature: -75 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved