Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The TDK MMZ2012Y600BTD25 is a chip bead data line filter with AEC-Q200 screening. Featuring 2 terminals, it has a max operating temperature of 125°C and min of -55°C. With dimensions of L2.0xB1.25xH0.85 (mm), it is ideal for automotive applications requiring a rated current of 1A and output impedance of 60 ohms.
Median Price
$0.016
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
TTI
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Nova Conductors
$0.033
Vyrian
Semicontronic
$0.014
Ampacity Inc.
Aranea Global
$0.032
$0.031
Argo Parts USA
Continental Prestige Electronics
Aztec Data Supply Inc.
$1.250
Corohmni
$3.284
AZTECH Wire
$10.550
Authorized Procurement Solutions
Formix International (Excess)
This product has passed the stringent automotive industry standards for quality and reliability, ensuring high performance in automotive applications.
Chip bead construction allows for compact size and efficient filtering of electromagnetic interference, making it ideal for space-constrained applications.
Having 2 terminals simplifies the installation process and ensures a secure connection, increasing the overall reliability of the filter.
Ferrite chip filters are known for their high performance in suppressing EMI and noise, making this product a reliable choice for noise mitigation in electronic circuits.
With a high maximum operating temperature, this filter can withstand elevated temperatures without compromising its functionality, ensuring long-term reliability in various environments.
The wide range of operational temperatures allows this filter to function effectively in both extreme cold and hot conditions, making it versatile for diverse application environments.
The slim width of 1.25mm enables easy integration into compact electronic devices without taking up much space, ideal for applications with limited board space.
The low DC resistance of 0.1 ohm minimizes power loss and maintains signal integrity, ensuring efficient filtering performance and reliable operation.
The compact length of 2mm contributes to the overall small footprint of the filter, making it suitable for miniaturized electronic designs.
The output impedance of 60 ohms indicates the filter's ability to effectively attenuate electromagnetic interference and noise, ensuring clean signal transmission in electronic circuits.
The TR packing method in a 7-inch reel simplifies handling and storage, making it convenient for high-volume production and assembly processes.
Surface mount design allows for easy and secure installation onto PCBs, enabling efficient assembly and reducing manufacturing time and costs.
The compact dimensions of 2.0x1.25x0.85mm (LxWxH) or 0.079x0.049x0.033 inches make this filter suitable for space-constrained applications where size matters.
With a rated current of 1A, this filter can handle moderate power loads efficiently, making it suitable for various electronic devices and applications.
The low height of 0.85mm contributes to the overall slim profile of the filter, allowing for easy integration in thin electronic devices or crowded PCB layouts.
Data Line Filters MMZ2012Y600BTD25 attributes and parameters. Explore more Data Line Filters devices from TDK
Additional Features:
Construction:
Maximum DC Resistance:
Filter Type:
Height:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Screening Level:
Width (mm):
MMZ2012Y600BTD25 Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Obsolescence/ EOL - MMZ2012 Series 22/Nov/2022
PCN Part Status Change - MMZ2012 Series NRND 19/Sep/2022 Mult Devs Allocation 22/Aug/2022
TDK was founded as a venture enterprise in 1935 for the purpose of industrializing a magnetic material called ferrite, which was invented at the Tokyo Institute of Technology. TDK's corporate motto is "Contribute to culture and industry through creativity," a message that embodies the company's founding spirit. Guided by this spirit, in the ensuing year TDK has sought to refine its materials and process technologies, as it develops new products that satisfy market needs. Concurrently, TDK advances globalization and diversification of its business operation while actively pursuing M&As, collaboration with external partners and other initiatives. As a result, TDK today is engaged in four main businesses: Passive Components, Sensor Application Products, Magnetic Application Products, and Energy Application Products. Looking ahead, TDK would like to remain a dynamic company that continues to deliver even higher value to all stakeholders, including shareholders, customers, suppliers, employees and local communities, by bringing together the entire Group's strengths while taking full advantage of the strengths of each Group company, and constantly drawing on innovative thinking and a willingness to tackle new challenges.
BAT54SLT1G
Onsemi
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
1N4148
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
1N4148WS
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
EU2B-YS3203F
Idec
ROTARY SWITCH;
SMBJ18CA
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ESD5Z5.0T1G
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
International Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
STM32H743IIT6
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
NE555D
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BAV99
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
OPA2277UA/2K5
Texas Instruments
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
Fairchild Semiconductor
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FCFBMJ3216HS800-T
Taiyo Yuden
Taiyo Yuden's FCFBMJ3216HS800-T is a Ferrite Chip Data Line Filter with 2 terminals, 80 Ohm output impedance, and 4A rated current. Ideal for surface mount applications, it operates b/w -40°C to 85°C, offering low DC resistance of 0.01 ohm.
BLM21AG471SN1D
Murata Manufacturing
BLM21AG471SN1D by Murata Manufacturing is a chip bead data line filter with 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This ferrite chip filter has dimensions of L2.0XB1.25XH0.85 (mm) and is commonly used for surface mount applications in electronic devices.
ACP3225-102-2P-T
TDK ACP3225-102-2P-T is a 2-function data line filter with 10 Mohm min insulation resistance, 60V rated voltage, and 1.5A rated current. Ideal for applications requiring noise suppression in data lines with operating temperatures from -40 to 85°C.
BKP1005HS121-T
BKP1005HS121-T by Taiyo Yuden is a 0402 multilayer chip data line filter with 2 terminals. It operates b/w -55 to 85 °C, has a DC resistance of 0.14 ohm, and output impedance of 120 OHM at 100 MHz. Ideal for surface mount applications in electronics requiring noise suppression and signal filtering.
FBMH1608HM601-T
Taiyo Yuden's FBMH1608HM601-T is a chip bead data line filter with 2 terminals, rated for 0.7A current and 600 ohm output impedance. With dimensions of 1.6x0.8x0.8mm, it operates b/w -40°C to 85°C, ideal for noise suppression in high-frequency applications up to 100MHz.
MMZ2012R102AT
The TDK MMZ2012R102AT is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. With dimensions of L2.0xB1.25xH0.85 (mm), it offers a max DC resistance of 0.3 ohm and output impedance of 1000 OHM, suitable for surface mount applications in various electronic devices.
PA3747.905NL
Pulse Electronics
PA3747.905NL by Pulse Electronics is a data line filter with 2 functions, AEC-Q200 screening level, and 4 terminals. It operates b/w -40 to 125 °C and has an inductance of 6030 uH. Ideal for applications requiring high output impedance and rated current of 1.45 A.
BLM31AJ601SN1L
BLM31AJ601SN1L by Murata Manufacturing is a FERRITE CHIP data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This surface mount filter measures L3.2XB1.6XH1.1 (mm) and is commonly used for impedance matching in electronic circuits.
742792656
Wuerth Elektronik & Kg
Wuerth Elektronik & Kg 742792656 is a multi-layer data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.35 ohm, and an output impedance of 750 OHM. Ideal for surface mount applications in electronics requiring filtering at frequencies ranging from 100 MHz to 150 MHz.
744272332
Wurth Elektronik 744272332 is a Data Line Filter with UL approval, rated at 80V and inductance of 3300uH. It has 2 functions, operates b/w -40 to 125°C, and offers 0.36 ohm DC resistance. Ideal for applications requiring high output impedance of 8900 OHM in a compact L10.0xB8.7xH6.5 mm size for surface mount installation.
744222
Wurth Elektronik 744222 is a UL-approved data line filter with 2 functions, rated at 80V. With inductance of 1000uH and max DC resistance of 0.31 ohm, it operates b/w -40 to 125 °C. Ideal for applications requiring a surface mount filter with dimensions L9.2XB6.0XH5.0mm, such as electronic devices needing noise suppression on data lines.
FBMH3225HM601NTV
Taiyo Yuden's FBMH3225HM601NTV is a Ferrite Chip Data Line Filter with 2 terminals, 600 Ohm output impedance, and 3A rated current. It operates b/w -40 to 125°C, has dimensions of L3.2xB2.5xH2.5 mm, and is ideal for surface mount applications in electronic devices requiring noise suppression.
742792796
Wurth Elektronik 742792796 is a FERRITE CHIP data line filter with 2 terminals, rated for 0.2A current. It operates b/w -55 to 125 °C and has a max DC resistance of 1.5 ohm. Ideal for surface mount applications requiring output impedance of 1000 OHM in compact spaces.
7427927311
Wurth Elektronik 7427927311 is a FERRITE CHIP Data Line Filter with AEC-Q200 screening. It has 2 terminals, operates b/w -55 to 125 °C, and offers 0.09 ohm DC resistance. Ideal for surface mount applications, it measures L1.0xB0.5xH0.5 mm and handles a rated current of 1.2A while providing an output impedance of 120 OHM.
CM5441Z161B-10
Steward
DATA LINE FILTER; Maximum DC Resistance: .0003 ohm; Rated Current: 75 A; Mounting Type: THROUGH HOLE MOUNT; Approvals (V): UL; Dimensions: L13.72XB10.41XH15.24 (mm)/L0.54XB0.41XH0.6 (inch);
744227
Wurth Elektronik 744227 is a UL-approved data line filter with 2 functions, rated at 80V and inductance of 51uH. Ideal for applications requiring surface mount filters with dimensions of L9.2xB6.0xH5.0mm, it operates b/w -40°C to 125°C and has a max DC resistance of 0.16 ohm.
MMZ2012R301ATD25
MMZ2012R301ATD25 by TDK is a chip bead data line filter with AEC-Q200 screening. Featuring FERRITE CHIP technology, it has 2 terminals and operates b/w -55 to 125 °C. With dimensions of L2.0xB1.25xH0.85 (mm), it's ideal for automotive electronics and industrial applications due to its 300 OHM output impedance and 0.6A rated current capacity.
FLTR75V05Z
Ge Power Electronics
DATA LINE FILTER MODULE; Maximum DC Resistance: .02 ohm; Rated Current: 5 A; Minimum Operating Temperature: -40 Cel; Rated Voltage: 75 V; Dimensions: L25.4XB25.4XH10.16 (mm)/L1.0XB1.0XH0.4 (inch);
USBUF02W6
USBUF02W6 by STMicroelectronics is a DATA LINE FILTER with 6 terminals, UL approved, and MIL-STD-883E screened. It has a max operating temperature of 125°C and min of -40°C. With a capacitance of 100uF, it is ideal for data line filtering applications in various electronic devices.
BLM21PG221SH1D
BLM21PG221SH1D by Murata is an 0805 chip bead filter with 2 terminals, operating b/w -55 to 125°C. With a DC resistance of 0.045 ohm and output impedance of 220 OHM, it's ideal for data line filtering applications. Rated at 1.25 A, this ferrite chip offers surface mounting in compact dimensions of L2.0xB1.25xH0.85 mm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MMZ2012Y202BT000
MMZ2012Y202BT000 by TDK is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. With a width of 1.25mm, it offers a max DC resistance of 0.5 ohm and output impedance of 2000 ohm. Ideal for surface mount applications in electronics to provide effective filtering and impedance matching capabilities.
MMZ2012S601AT000
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .3 ohm; Material: Ferrite; Rated Current: .5 A; No. of Functions: 1;
MMZ2012R102AT000
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .3 ohm; Material: Ferrite; Rated Current: .5 A; Minimum Operating Temperature: -55 Cel;
MMZ2012Y202BTD25
MMZ2012Y202BTD25 by TDK is a chip bead data line filter with AEC-Q200 screening. Featuring FERRITE CHIP construction, it has 2 terminals and operates b/w -55 to 125 °C. With a max DC resistance of 0.5 ohm, it is ideal for automotive applications requiring an output impedance of 2000 OHM.
MMZ2012Y601BT000
MMZ2012Y601BT000 by TDK is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. With dimensions of L2.0xB1.25xH0.85 (mm), it has a max DC resistance of 0.2 ohm and output impedance of 600 OHM, suitable for surface mount applications in electronics for noise suppression.
MMZ2012S102AT000
MMZ2012S102AT000 by TDK is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. With dimensions of L2.0xB1.25xH0.85 (mm), it has a max DC resistance of 0.35 ohm and rated current of 0.5 A, making it suitable for surface mount applications in electronic devices requiring noise suppression.
MMZ2012R102ATD25
MMZ2012R102ATD25 by TDK is a chip bead data line filter with AEC-Q200 screening. It has a max operating temperature of 125°C and min of -55°C, ideal for automotive applications. With dimensions of L2.0xB1.25xH0.85 (mm), it offers a max DC resistance of 0.3 ohm and output impedance of 1000 ohm, suitable for surface mounting type.
MMZ2012R601AT000
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .2 ohm; Material: Ferrite; Rated Current: .5 A; Width (mm): 1.25;
MMZ2012R601AT
MMZ2012R601AT by TDK is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. It has a DC resistance of 0.2 ohm, output impedance of 600 OHM, and rated current of 0.5 A. Ideal for surface mount applications in electronics to suppress electromagnetic interference.
MMZ2012Y202BT
The TDK MMZ2012Y202BT is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. With dimensions of L2.0xB1.25xH0.85 (mm), it offers a max DC resistance of 0.5 ohm and output impedance of 2000 ohm, making it ideal for surface mount applications requiring effective filtering in electronic circuits.
MMZ2012Y152BT000
MMZ2012Y152BT000 by TDK is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. It has a max DC resistance of 0.4 ohm, output impedance of 1500 ohm, and rated current of 0.5 A. Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering capabilities.
MMZ2012S121AT000
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .15 ohm; Material: Ferrite; Rated Current: .8 A; No. of Terminals: 2;
MMZ2012Y202B
The TDK MMZ2012Y202B is a chip bead data line filter with FERRITE CHIP technology. It has 2 terminals, matte tin finish, and dimensions of L2.0xB1.25xH0.85 (mm). With a max operating temperature of 125°C and rated current of 0.4A, it is ideal for surface mount applications requiring an output impedance of 2000 ohm.
MMZ2012R301AT000
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .15 ohm; Material: Ferrite; Rated Current: .6 A; JESD-609 Code: e2;
MMZ2012Y102BT000
MMZ2012Y102BT000 by TDK is a chip bead data line filter with 2 terminals, rated current of 0.5A, and max DC resistance of 0.3 ohm. It is used for filtering in electronic circuits due to its ferrite construction and output impedance of 1000 ohm. Operating temperatures range from -55 to 125 °C.
MMZ2012S601ATD25
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .3 ohm; Rated Current: .5 A; Length: 2 mm; Packing Method: TR, 7 INCH;
MMZ2012R102A
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .3 ohm; Rated Current: .5 A; No. of Terminals: 2; Width (mm): 1.25;
MMZ2012Y600BT000
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .1 ohm; Material: Ferrite; Rated Current: 1 A; Terminal Finish: TIN NICKEL COPPER;
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .15 ohm; Rated Current: .6 A; Packing Method: TR, 7 INCH; Length: 2 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved