Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TDK MMZ2012S601AT000 is an 0805 chip bead filter with 2 terminals, rated at 0.5A. With a max DC resistance of 0.3 ohm and output impedance of 600 ohm, it's ideal for data line filtering applications. Operating b/w -55 to 125 °C, this ferrite chip measures L2.0xB1.25xH0.85 mm and has TIN NICKEL COPPER terminal finish.
Median Price
$0.025
Lifecycle Status
Suppliers In-Stock
32
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.100
100+ parts
$0.047
1k+ parts
$0.040
10k+ parts
TTI
-
$0.026
RS (Exports)
$0.024
$0.019
Avnet
Arrow
Verical
Nova Conductors
$0.063
Maritex
$0.033
$0.021
Vyrian
ComSIT Distribution GmbH
Chip Stock
Ack Elektronik San.Tic.Ltd.Sti
Prism Electronics
PC Components Company LLC
Bristol Electronics
$0.079
$0.048
$0.032
Connector Distribution Corp
Right Parts Inc.
Q Components
Legend Electronics Inc.
Atlantic Semiconductor
Rutronik
LIBRA Elektronik GmbH
Resion
Dan-Mar Components
Sunrise Surplus Inc.
Electronics Depot
Inventory MP
Sensible Micro Corp
IBS Electronics
$0.028
LWI Electronics Inc
TME
$0.038
$0.022
EMSNET
Ampacity Inc.
$0.014
Semicontronic
$0.016
Argo Parts USA
$0.061
Netroflash
$0.060
$0.059
Advanced Electronics
$0.537
$0.510
Corohmni
$0.758
Aztec Data Supply Inc.
$3.270
Andel Nordic
$10.016
$9.615
Perfect Parts
GreenTree Electronics
Assy Fe
Cyclops Electronics Ltd (Excess)
Continental Prestige Electronics
Robosynatics
$1.522
$1.491
Lucentia Tech
Authorized Procurement Solutions
Chip bead construction ensures reliability and durability even in demanding applications.
Having 2 terminals simplifies installation and connection, making it user-friendly.
Standardized case code for easy identification and compatibility with various systems.
Ferrite chip filter type provides effective noise suppression for improved signal quality.
High maximum operating temperature ensures reliable performance under varying environmental conditions.
Wide temperature range allows for usage in both extreme cold and hot environments.
Tin nickel copper finish enhances conductivity and corrosion resistance for long-term use.
Compact width makes it suitable for space-constrained installations.
Low DC resistance minimizes power loss and improves efficiency.
Optimal length for effective performance and easy integration into circuit design.
Output impedance of 600 ohm ensures compatibility with a wide range of devices and systems.
TR packaging and 7-inch reel size facilitate convenient storage, handling, and deployment.
Surface mount design simplifies installation and saves space on PCBs.
Compact dimensions make it versatile and suitable for various electronic applications.
High rated current of 0.5 A enables handling of moderate power loads without overheating.
Low profile height allows for easy integration in tight spaces.
Ferrite material provides excellent electromagnetic interference suppression for reliable signal quality.
Data Line Filters MMZ2012S601AT000 attributes and parameters. Explore more Data Line Filters devices from TDK
Case Code:
Construction:
Maximum DC Resistance:
Filter Type:
Height:
JESD-609 Code:
Length:
Material:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Sub-Category:
Terminal Finish:
Width (mm):
MMZ2012S601AT000 Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Obsolescence/ EOL - MMZ2012 Series 22/Nov/2022
PCN Part Number - MMZ,MPS Series Oct/2014
PCN Part Status Change - MMZ2012 Series NRND 19/Sep/2022 Mult Devs Allocation 22/Aug/2022
TDK was founded as a venture enterprise in 1935 for the purpose of industrializing a magnetic material called ferrite, which was invented at the Tokyo Institute of Technology. TDK's corporate motto is "Contribute to culture and industry through creativity," a message that embodies the company's founding spirit. Guided by this spirit, in the ensuing year TDK has sought to refine its materials and process technologies, as it develops new products that satisfy market needs. Concurrently, TDK advances globalization and diversification of its business operation while actively pursuing M&As, collaboration with external partners and other initiatives. As a result, TDK today is engaged in four main businesses: Passive Components, Sensor Application Products, Magnetic Application Products, and Energy Application Products. Looking ahead, TDK would like to remain a dynamic company that continues to deliver even higher value to all stakeholders, including shareholders, customers, suppliers, employees and local communities, by bringing together the entire Group's strengths while taking full advantage of the strengths of each Group company, and constantly drawing on innovative thinking and a willingness to tackle new challenges.
1N4148WS
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
General Instrument
1N4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Weitron Technology
SMBJ18CA
Yageo
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Solid State Devices
TCA6424ARGJR
Texas Instruments
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
Diotec Semiconductor Ag
SS14
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBF170LT1G
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
Vishay Intertechnology
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
HF50ACB321611-T
TDK
The TDK HF50ACB321611-T is a 1206 FERRITE CHIP filter with 2 terminals. It operates b/w -40 to 125 °C, has a DC resistance of 0.2 ohm, and an output impedance of 31 OHM at 100 MHz. Ideal for data line filtering in surface mount applications due to its compact L3.2XB1.6XH1.1 (mm) size and 0.5 A rated current capacity.
BLM18EG121SN1D
Murata Manufacturing
Murata Manufacturing's BLM18EG121SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a DC resistance of 0.04 ohm and an output impedance of 145 ohm for frequencies ranging from 100 MHz to 1000 MHz. Ideal for surface mount applications, this ferrite chip filter has a rated current of 2A and is commonly used in electronic devices requiring noise suppression on data lines.
BLM15BD102SN1D
Murata Manufacturing's BLM15BD102SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1x0.5x0.5mm, it offers a max frequency of 100MHz and DC resistance of 0.9 ohm. Ideal for surface mount applications in electronic devices requiring impedance matching and noise suppression up to 1000 ohm output impedance.
BLM15BB221SN1D
Murata Manufacturing's BLM15BB221SN1D is a chip bead data line filter with 2 terminals, rated current of 0.2A, and output impedance of 220 ohm. It operates b/w -55°C to 125°C, suitable for surface mount applications in filtering frequencies from 100 MHz with dimensions of L1.0xB0.5xH0.5 mm.
74279279
Wuerth Elektronik & Kg
Wurth Elektronik 74279279 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, has a DC resistance of 1 ohm, and an output impedance of 600 OHM at frequencies ranging from 100 MHz to 180 MHz. This surface mount component measures L1.0XB0.5XH0.5 (mm) and is packed in TAPE AND REEL format for easy handling during assembly.
PA3747.205NL
Pulse Electronics
PA3747.205NL by Pulse Electronics is a data line filter with 2 functions, AEC-Q200 screening level, and 4 terminals. With inductance of 1280 uH, it operates b/w -40 to 125 °C and has a max DC resistance of 0.0255 ohm. Ideal for applications requiring high output impedance and rated current of 4A.
BLM15HD102SN1D
BLM15HD102SN1D by Murata is a chip bead data line filter with 1 function, operating b/w -55 to 125°C. It has a DC resistance of 1.25 ohm, suitable for frequencies ranging from 100 MHz to 1000 MHz. Ideal for surface mount applications in electronic devices requiring impedance of 1000 ohms.
SRF4532-101Y
Bourns
Bourns SRF4532-101Y is a Data Line Filter with 100uH inductance, 10 Mohm insulation resistance, and rated voltage of 50V. Ideal for applications requiring noise suppression in data lines, it operates b/w -40°C to 125°C and has a max DC resistance of 8.9 ohm.
MPZ1608S221ATA00
The TDK MPZ1608S221ATA00 is a 0603 chip bead data line filter with 2 terminals. It offers a max operating temperature of 125°C and min frequency of 100 MHz. Ideal for surface mount applications, it provides an output impedance of 220 ohms and rated current of 2.2A in a compact size of L1.6xB0.8xH0.8 (mm).
FBMJ2125HS420-T8
Taiyo Yuden
Taiyo Yuden's FBMJ2125HS420-T8 is a Ferrite Chip Data Line Filter with 2 terminals, 125°C max temp, -40°C min temp. It has 1.25mm width, 2mm length, and 0.008 ohm DC resistance. With an output impedance of 42Ω and rated current of 4A, it's ideal for surface mount applications in electronics to reduce electromagnetic interference.
742792515
Wurth Elektronik 742792515 is a chip bead data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, has 2 terminals, and measures L4.5XB3.2XH1.5 (mm). Ideal for applications requiring filtering at frequencies ranging from 60 MHz to 100 MHz.
DLW5BTN501SQ2L
DLW5BTN501SQ2L by Murata Mfg is a Data Line Filter with 4 terminals, rated for 50V and 4A. It offers 10 Mohm min insulation resistance, operates b/w -40 to 85 °C, and has a max DC resistance of 0.019 ohm. Ideal for applications requiring output impedance of 500 OHM in surface mount configurations.
NFM3DCC221R1H3L
Murata Manufacturing's NFM3DCC221R1H3L is a data line filter with 220uF capacitance, 50V rated voltage, and 0.3A rated current. It features feed through capacitor type and is ideal for applications requiring noise filtering in electronic circuits.
ACM7060-701-2PL-TL
ACM7060-701-2PL-TL by TDK is a Data Line Filter with 2 functions, rated voltage of 80V, and max operating temp of 85°C. It has 4 terminals, insulation resistance of 10 Mohm, and DC resistance of 0.015 ohm. Ideal for applications requiring noise suppression in data lines.
BLM18EG221SN1
Murata Manufacturing's BLM18EG221SN1 is a FERRITE CHIP data line filter with 220 OHM output impedance, 2A rated current, and -55 to 125°C operating temperature range. Ideal for surface mount applications requiring effective noise suppression in electronic circuits.
MMZ1608B601C
The TDK MMZ1608B601C is a chip bead data line filter with FERRITE CHIP technology. It has a max operating temperature of 125°C and min of -55°C, with a rated current of 0.5A. Ideal for surface mount applications requiring an output impedance of 600 ohms in compact dimensions of L1.6xB0.8xH0.6 mm.
ILHB1206ER601V
Vishay Dale
FERRITE CHIP; Maximum DC Resistance: .1 ohm; Rated Current: 2.5 A; Approvals (V): IEC; Width (mm): 1.6; Output Impedance (ohm): 600 OHM;
NFM41PC204F1H3
Murata Manufacturing's NFM41PC204F1H3 is a data line filter with 2A rated current, 0.2uF capacitance, and 50V rated voltage. It features feed through capacitor type for applications requiring noise suppression in electronic circuits. Operating temperature range from -55°C to 85°C makes it suitable for various environments.
NFL21SP506X1C3D
Murata Manufacturing's NFL21SP506X1C3D is a 16V data line filter with 1000 Mohm insulation resistance. Featuring 0.305uH inductance, it operates b/w -55 to 125 °C and has a rated current of 0.15A. Ideal for applications requiring noise suppression in data lines with three terminals, this surface mount filter measures L2.0xB1.25xH0.85mm and uses TIN terminal finish.
742792023
Wurth Elektronik 742792023 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It has a width of 1.2mm, length of 2mm, and height of 0.9mm. With an output impedance of 120 ohm, it operates b/w -55 to 125 °C and supports frequencies from 100 MHz to 250 MHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MMZ2012Y202BT000
MMZ2012Y202BT000 by TDK is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. With a width of 1.25mm, it offers a max DC resistance of 0.5 ohm and output impedance of 2000 ohm. Ideal for surface mount applications in electronics to provide effective filtering and impedance matching capabilities.
MMZ2012R102AT000
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .3 ohm; Material: Ferrite; Rated Current: .5 A; Minimum Operating Temperature: -55 Cel;
MMZ2012Y202BTD25
MMZ2012Y202BTD25 by TDK is a chip bead data line filter with AEC-Q200 screening. Featuring FERRITE CHIP construction, it has 2 terminals and operates b/w -55 to 125 °C. With a max DC resistance of 0.5 ohm, it is ideal for automotive applications requiring an output impedance of 2000 OHM.
MMZ2012Y601BT000
MMZ2012Y601BT000 by TDK is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. With dimensions of L2.0xB1.25xH0.85 (mm), it has a max DC resistance of 0.2 ohm and output impedance of 600 OHM, suitable for surface mount applications in electronics for noise suppression.
MMZ2012S102AT000
MMZ2012S102AT000 by TDK is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. With dimensions of L2.0xB1.25xH0.85 (mm), it has a max DC resistance of 0.35 ohm and rated current of 0.5 A, making it suitable for surface mount applications in electronic devices requiring noise suppression.
MMZ2012R102AT
The TDK MMZ2012R102AT is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. With dimensions of L2.0xB1.25xH0.85 (mm), it offers a max DC resistance of 0.3 ohm and output impedance of 1000 OHM, suitable for surface mount applications in various electronic devices.
MMZ2012R102ATD25
MMZ2012R102ATD25 by TDK is a chip bead data line filter with AEC-Q200 screening. It has a max operating temperature of 125°C and min of -55°C, ideal for automotive applications. With dimensions of L2.0xB1.25xH0.85 (mm), it offers a max DC resistance of 0.3 ohm and output impedance of 1000 ohm, suitable for surface mounting type.
MMZ2012R601AT000
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .2 ohm; Material: Ferrite; Rated Current: .5 A; Width (mm): 1.25;
MMZ2012R601AT
MMZ2012R601AT by TDK is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. It has a DC resistance of 0.2 ohm, output impedance of 600 OHM, and rated current of 0.5 A. Ideal for surface mount applications in electronics to suppress electromagnetic interference.
MMZ2012Y202BT
The TDK MMZ2012Y202BT is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. With dimensions of L2.0xB1.25xH0.85 (mm), it offers a max DC resistance of 0.5 ohm and output impedance of 2000 ohm, making it ideal for surface mount applications requiring effective filtering in electronic circuits.
MMZ2012Y152BT000
MMZ2012Y152BT000 by TDK is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. It has a max DC resistance of 0.4 ohm, output impedance of 1500 ohm, and rated current of 0.5 A. Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering capabilities.
MMZ2012S121AT000
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .15 ohm; Material: Ferrite; Rated Current: .8 A; No. of Terminals: 2;
MMZ2012Y202B
The TDK MMZ2012Y202B is a chip bead data line filter with FERRITE CHIP technology. It has 2 terminals, matte tin finish, and dimensions of L2.0xB1.25xH0.85 (mm). With a max operating temperature of 125°C and rated current of 0.4A, it is ideal for surface mount applications requiring an output impedance of 2000 ohm.
MMZ2012R301AT000
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .15 ohm; Material: Ferrite; Rated Current: .6 A; JESD-609 Code: e2;
MMZ2012Y102BT000
MMZ2012Y102BT000 by TDK is a chip bead data line filter with 2 terminals, rated current of 0.5A, and max DC resistance of 0.3 ohm. It is used for filtering in electronic circuits due to its ferrite construction and output impedance of 1000 ohm. Operating temperatures range from -55 to 125 °C.
MMZ2012S601ATD25
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .3 ohm; Rated Current: .5 A; Length: 2 mm; Packing Method: TR, 7 INCH;
MMZ2012R102A
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .3 ohm; Rated Current: .5 A; No. of Terminals: 2; Width (mm): 1.25;
MMZ2012Y600BT000
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .1 ohm; Material: Ferrite; Rated Current: 1 A; Terminal Finish: TIN NICKEL COPPER;
MMZ2012R301ATD25
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .15 ohm; Rated Current: .6 A; Packing Method: TR, 7 INCH; Length: 2 mm;
MMZ2012S800AT
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .1 ohm; Material: Ferrite; Rated Current: .8 A; Mounting Type: SURFACE MOUNT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved