Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SZEMI2121MTTAG by Onsemi is a Data Line Filter with 8 terminals, rated for 0.1A current. It operates b/w -40°C to 85°C and has matte tin finish. With dimensions of 2.2mm x 2.0mm x 0.8mm, it's ideal for applications requiring surface mount filters in electronic devices.
Median Price
$0.536
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Rochester
1+ parts
$0.577
100+ parts
$0.542
1k+ parts
$0.490
10k+ parts
-
Mouser Electronics
$0.495
Verical
Digiode
$0.548
Nova Conductors
$0.838
Vyrian
Chip Stock
Cyclops Electronics Ltd
Component Sense
Semtec, LLC
Bristol Electronics
NexGen Digital
Ampacity Inc.
$0.421
Semicontronic
$0.410
$0.408
Corohmni
Corphita
$0.519
Argo Parts USA
$0.628
$0.609
Bastille Electronics
$0.796
$0.756
$0.746
Continental Prestige Electronics
$1.300
$0.797
$0.510
Advanced Electronics
$2.449
$2.327
Aztec Data Supply Inc.
$3.290
Kepictronics
RC Electronics
ChipstoGo Electronic ltd
Authorized Procurement Solutions
Perfect Parts
Lixinc
Kulean Microsystems
Problanco Electronics
Infinite Electronics LLP (Excess)
TANS Electronics
SupplyDigital Components
Futuretech Components
UHIMA Technologies
This data line filter has 8 terminals, providing multiple connection options for various devices, making it versatile and suitable for different applications.
Being a data line filter, this product effectively removes noise and interference from data lines, ensuring smooth and reliable data transmission.
With a high maximum operating temperature of 85°C, this filter can withstand high temperatures, making it durable and reliable in different environments.
The filter's low minimum operating temperature of -40°C ensures it can function well in cold environments, making it suitable for a wide range of applications.
The matte tin terminal finish provides good conductivity and corrosion resistance, ensuring reliable electrical connections and longevity of the product.
This filter is designed for surface mounting, making it easy to install and suitable for applications where space is limited.
The compact size of this filter allows for space-saving installation while still providing effective filtering capabilities.
With a rated current of 0.1 A, this filter is suitable for low-power applications, providing efficient filtering without compromising on performance.
The plastic package material offers durability and protection to the filter components, ensuring long-term reliability and performance.
Data Line Filters SZEMI2121MTTAG attributes and parameters. Explore more Data Line Filters devices from Onsemi
Filter Type:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Material:
Dimensions:
Rated Current:
Sub-Category:
Terminal Finish:
SZEMI2121MTTAG Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Assembly/Origin - SZEMI2x/EMI2x 11/May/2022
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Nte Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
NC7WZ17P6X
Onsemi
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
SMBJ18CA
Daco Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Leshan Radio
Shenzhen Yixinsemi Electronics
Unitrode
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
BSS84-7-F
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRA340T3G
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
BSS123-7-F
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM358D-T
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
NFM41CC222R2A3L
Murata Manufacturing
Murata's NFM41CC222R2A3L is a data line filter with 100V rated voltage, 2200uF capacitance, and -55 to 125°C operating temperature range. It features FEED THROUGH CAPACITOR type and is ideal for applications requiring high insulation resistance and surface mounting type.
54-844-001
Api Technologies
54-844-001 by Api Technologies is a UL/CSA approved data line filter with a rated voltage of 600V. Featuring a feed through capacitor, it offers max insertion loss of 50dB and capacitance of 4700uF. Ideal for panel mounting applications, this filter operates at temperatures up to 125°C.
ACF321825-102-TD01
TDK
TDK's ACF321825-102-TD01 is a FERRITE CHIP filter with 25 dB attenuation at 140 MHz. It has a rated voltage of 20 V, 0.15 ohm DC resistance, and dimensions of L3.2XB1.8XH2.5 mm. Ideal for data line filtering applications due to its high insulation resistance and compact surface mount design.
DLW31SH222SQ2L
Murata Manufacturing's DLW31SH222SQ2L is a Data Line Filter with 2 functions, AEC-Q200 screening level, and 32V rated voltage. With dimensions of L3.2XB1.6XH1.9 (mm), it offers 10 Mohm min insulation resistance for automotive applications at temperatures ranging from -40 to 125 °C.
PA3747.305NL
Pulse Electronics
PA3747.305NL by Pulse Electronics is a data line filter with 2 functions, AEC-Q200 screening level, and 1920 uH inductance. It operates b/w -40 to 125 °C and has a max DC resistance of 0.0495 ohm. Ideal for applications requiring a through-hole mount filter with a rated current of 2.75 A and an output impedance of 5080 OHM.
HZ1206E601R-10
Laird Technologies
Laird Technologies' HZ1206E601R-10 is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With dimensions of L3.2XB1.6XH1.1 (mm), it offers an output impedance of 600 OHM and a max frequency of 1000 MHz. Ideal for surface mount applications, this ferrite chip filter has a DC resistance of 0.3 ohm and rated current of 0.5 A.
BLA31AG601SN4D
Murata Manufacturing's BLA31AG601SN4D is a Ferrite Chip Data Line Filter with 4 functions and 8 terminals. It has a max operating temperature of 125°C, DC resistance of 0.35 ohm, and output impedance of 600 ohm. Ideal for surface mount applications in electronics to reduce electromagnetic interference.
BLM21PG220SN1D
BLM21PG220SN1D by Murata is an 0805 chip bead filter with 2 terminals. It operates b/w -55 to 125 °C and has a DC resistance of 0.01 ohm. With dimensions of L2.0XB1.25XH0.85 (mm), it's ideal for data line filtering applications at frequencies ranging from 100 MHz, offering an output impedance of 22 OHM and a rated current of 6 A.
FBMH3216HM221NT
Taiyo Yuden
FBMH3216HM221NT by Taiyo Yuden is a chip bead data line filter with dimensions of 3.2x1.6x1.6mm, suitable for surface mount applications. It offers an output impedance of 220Ω, rated current of 4A, and operates b/w -40°C to 125°C. Ideal for noise suppression in circuits with frequencies ranging from 100MHz and DC resistance of 0.02Ω.
BLM18SG121TN1J
BLM18SG121TN1J by Murata Manufacturing is a chip bead data line filter with 2 terminals and a case code of 0603. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This filter is commonly used for noise suppression in electronic circuits.
NFL21SP107X1C3D
Murata Manufacturing's NFL21SP107X1C3D is a 16V data line filter with 1000 Mohm insulation resistance. Featuring 0.135 uH inductance and 44 uF capacitance, it operates b/w -55 to 125 °C. Ideal for surface mount applications, this filter has three terminals and is packed in tape format.
BLM18BA050SN1D
Murata Manufacturing's BLM18BA050SN1D is a 0603 chip bead filter with 2 terminals, operating b/w -55 to 125°C. With a DC resistance of 0.2 ohm and output impedance of 5 ohm, it's ideal for data line filtering applications at frequencies ranging from 100 MHz.
BLM15PX601SN1D
Murata Manufacturing's BLM15PX601SN1D is a FERRITE CHIP data line filter with 0.5mm width, 1mm length, and 0.5mm height. It has a max DC resistance of 0.23 ohm and an output impedance of 600 ohm, suitable for surface mount applications in electronics to manage interference on data lines.
DLW43SH510XK2K
Murata Manufacturing DLW43SH510XK2K is a FERRITE CHIP filter with 51uH inductance, 10 Mohm insulation resistance, and rated for 0.23A current. It has 4 terminals, operates b/w -40 to 125 °C, and is AEC-Q200 compliant. Ideal for data line filtering applications requiring surface mount installation.
BK1608HS601-T
BK1608HS601-T by Taiyo Yuden is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers a max frequency of 100 MHz, DC resistance of 0.45 ohm, and output impedance of 600 OHM. Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering.
PS1720P02
TDK PS1720P02 is a data line filter with max temp of 70°C and min temp of -20°C. With diameter of 17mm, it's mounted through hole and comes in tape and reel packing. Ideal for applications requiring noise suppression in data lines.
74279205
Wuerth Elektronik & Kg
Wurth Elektronik 74279205 is an 0805 multi-layer ferrite chip filter with dimensions of L2.0xB1.2xH0.9 (mm). It operates b/w -55 to 125 °C, has a max frequency of 120 MHz, and DC resistance of 0.45 ohm. Ideal for data line filtering applications due to its surface mount design and output impedance of 1000 OHM.
FBMJ2125HS420-T
Taiyo Yuden's FBMJ2125HS420-T is an 0805 chip bead filter with 2 terminals. With a max operating temp of 85°C and min of -40°C, it offers low DC resistance of 0.008 ohm and output impedance of 42 OHM at 100 MHz. Ideal for data line filtering applications, this ferrite chip measures L2.0xB1.25xH0.85 mm and can handle a rated current of 4 A in surface mount installations.
FBMH3225HM601NT8
Taiyo Yuden's FBMH3225HM601NT8 is a Ferrite Chip Data Line Filter with 2 terminals, 600 Ohm output impedance, and 3A rated current. It operates b/w -40°C to 125°C, measures 3.2mm in length, and is ideal for surface mount applications requiring noise suppression in electronic circuits.
PA3747.505NL
PA3747.505NL by Pulse Electronics is a data line filter with 2 functions, AEC-Q200 screening level, and 3330 uH inductance. It operates b/w -40 to 125 °C and has a max DC resistance of 0.1035 ohm. Ideal for applications requiring high output impedance like automotive electronics.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SZEMI8142MUTAG
DATA LINE FILTER; Maximum DC Resistance: 6 ohm; Rated Current: .1 A; Output Impedance (ohm): 50 OHM; Packing Method: TR; Width (mm): 1.35;
SZEMI2180MTTBG
DATA LINE FILTER; Maximum DC Resistance: 5 ohm; Minimum Operating Temperature: -40 Cel; No. of Functions: 1; Width (mm): 1.6; Mounting Type: SURFACE MOUNT;
SZEMI4192MTTAG
DATA LINE FILTER; Maximum DC Resistance: 5 ohm; Output Impedance (ohm): 50 OHM; No. of Functions: 2; Length: 2.5 mm; Width (mm): 2;
SZEMI4193MTTAG
DATA LINE FILTER; Maximum DC Resistance: 5 ohm; Rated Current: .1 A; Minimum Operating Temperature: -40 Cel; No. of Terminals: 16; Packing Method: TR;
SZEMI7204MUTAG
DATA LINE FILTER; Maximum DC Resistance: 10 ohm; Capacitance: 24.2 uF; Package Material: PLASTIC; Height: .55 mm; Width (mm): 1.35;
SZEMI7206MUTAG
DATA LINE FILTER; Maximum DC Resistance: 10 ohm; Mounting Type: SURFACE MOUNT; Packing Method: TR; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
SZEMI7208MUTAG
DATA LINE FILTER; Maximum DC Resistance: 10 ohm; Inductance: .017 uH; No. of Functions: 8; No. of Terminals: 16; Width (mm): 1.35;
SZEMI8031MUTAG
DATA LINE FILTER; Rated Current: .1 A; Maximum Operating Temperature: 85 Cel; Width (mm): 1.35; Length: 1.5 mm; Packing Method: TR;
SZEMI8032MUTAG
DATA LINE FILTER; Rated Current: .1 A; No. of Terminals: 6; Minimum Operating Temperature: -40 Cel; Packing Method: TR; Width (mm): 1.35;
SZEMI8033MUTAG
DATA LINE FILTER; Rated Current: .1 A; Maximum Operating Temperature: 85 Cel; No. of Terminals: 6; Output Impedance (ohm): 50 OHM; Minimum Operating Temperature: -40 Cel;
SZEMI8041MUTAG
DATA LINE FILTER;
SZEMI8042MUTAG
SZEMI8043MUTAG
SZEMI9408MUTAG
DATA LINE FILTER; Height: .55 mm; Package Material: PLASTIC/EPOXY; Mounting Type: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; JESD-609 Code: e3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved