Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SZEMI7204MUTAG by Onsemi is a data line filter with 4 functions and 8 terminals. It offers an inductance of 0.017uH, capacitance of 24.2uF, and max DC resistance of 10 ohm. Ideal for applications requiring surface mount filters with a temperature range from -40 to 85 °C.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Advanced Electronics
$0.707
$0.700
$0.671
Kulean Microsystems
Problanco Electronics
SupplyDigital Components
Corphita
TANS Electronics
UHIMA Technologies
Corohmni
Having 4 functions allows for efficient filtering of data lines, providing reliable protection against noise and interference.
With 8 terminals, this data line filter can easily connect to multiple input and output sources, enhancing its versatility and applicability.
Specifically designed for data line filtering, ensuring optimal performance in data transmission and reception.
Capable of operating at high temperatures without compromising its functionality, making it suitable for various environments.
Capable of operating in low temperatures, ensuring reliability in cold environments where other filters may fail.
The matte tin finish offers corrosion resistance and improved solderability, contributing to the longevity and durability of the product.
The low inductance value allows for effective filtering of high-frequency signals, ensuring data integrity and minimal signal loss.
Compact width enables space-saving installation, ideal for applications where board space is limited.
Low resistance ensures minimal power loss and heat generation, contributing to the overall efficiency of the data line filter.
The short length facilitates easy integration and mounting of the filter, simplifying the installation process.
Matches the impedance of typical data lines, preventing signal reflections and ensuring optimal signal transmission.
TR (Tape and Reel) packaging method provides convenient handling and storage, suitable for automated assembly processes.
Surface mount design offers ease of installation and reliability, making it suitable for modern electronic applications.
The plastic package material is lightweight, cost-effective, and resistant to environmental factors, enhancing the durability of the product.
Low profile height allows for compact design and efficient use of space, ideal for applications with height restrictions.
The capacitance value helps in filtering out high-frequency noise and interference, ensuring clean and reliable data transmission.
Data Line Filters SZEMI7204MUTAG attributes and parameters. Explore more Data Line Filters devices from Onsemi
Capacitance:
Maximum DC Resistance:
Filter Type:
Height:
Inductance:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Package Material:
Packing Method:
Terminal Finish:
Width (mm):
SZEMI7204MUTAG Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
1N4148
Onsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99WT1G
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
BAV99
Continental Device India
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
2N2222A
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Synsemi
Toshiba
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MBRS1100T3G
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
ACT45B-220-2P-TL003
TDK
The TDK ACT45B-220-2P-TL003 is a FERRITE CHIP filter with 22uH inductance, 10 Mohm insulation resistance, and 0.25A rated current. Ideal for data line filtering applications due to its compact dimensions of L4.5XB3.2XH2.8 (mm) and surface mounting type.
ACM7060-301-2PL-TL
The TDK ACM7060-301-2PL-TL is a data line filter with 2 functions, rated at 80V and 5A. It offers a min insulation resistance of 10 Mohm and operates b/w -25°C to 85°C. Ideal for applications requiring noise suppression in data lines with its compact dimensions of L7.0xB6.0xH3.5 mm.
BLM18KG471SN1D
Murata Manufacturing
Murata Manufacturing's BLM18KG471SN1D is a chip bead data line filter with 470 OHM output impedance, suitable for surface mount applications. With dimensions of 1.6x0.8x0.8 mm and rated current of 1.5 A, it operates b/w -55 to 125 °C, making it ideal for noise suppression in electronic circuits up to 100 MHz frequency range.
PBY201209T-600Y-N
Chilisin Electronics
FERRITE CHIP; Maximum DC Resistance: .03 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 3 A; Output Impedance (ohm): 60 OHM;
MI0805J102R-10
Steward
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .15 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 1 A;
ACT45B-510-2P-TL001
The TDK ACT45B-510-2P-TL001 is a data line filter with 2 functions, rated at 50V and 0.2A. It offers a min insulation resistance of 10 Mohm and operates b/w -40 to 150 °C. Ideal for applications requiring noise suppression in data lines.
BNX022-01K
Murata Manufacturing's BNX022-01K is a 50V data line filter with 35dB attenuation at 1000MHz. With dimensions of L12.1xB9.1xH3.1mm, it operates b/w -40 to 125°C and has an output impedance of 50Ω. Ideal for applications requiring high insulation resistance and rated current up to 10A.
742792022
Wuerth Elektronik & Kg
Wurth Elektronik 742792022 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. With dimensions of L2.0XB1.2XH0.9 (mm), it has a max operating temperature of 125 °C and output impedance of 220 OHM at a frequency range from 100 MHz to 300 MHz. Ideal for surface mounting type, it offers low DC resistance (0.05 ohm) and rated current of 2 A in TAPE AND REEL packing method.
MI0805K601R-10
Laird Technologies
MI0805K601R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With dimensions of L2XB1.25XH.9 (mm), it offers a frequency range from 25 MHz to 1000 MHz and an output impedance of 600 OHM. Ideal for surface mount applications, it has a max DC resistance of 0.1 ohm and can handle a rated current of 1.5 A efficiently.
DLW5BTM102SQ2L
Murata Manufacturing DLW5BTM102SQ2L is a Data Line Filter with 2 functions, rated at 50V and 2A. It offers high insulation resistance of 10 Mohm, operates b/w -40 to 85 °C, and has a compact size of L5.0xB5.0xH2.35 mm. Ideal for applications requiring noise suppression in data lines.
BLM18PG471SN1J
Murata Manufacturing's BLM18PG471SN1J is a chip bead data line filter with 2 terminals, 0603 case code, and ferrite chip construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.2 ohm, and output impedance of 470 OHM. Ideal for surface mount applications in electronics for noise suppression at frequencies up to 100 MHz.
74279205
Wurth Elektronik 74279205 is an 0805 multi-layer ferrite chip filter with dimensions of L2.0xB1.2xH0.9 (mm). It operates b/w -55 to 125 °C, has a max frequency of 120 MHz, and DC resistance of 0.45 ohm. Ideal for data line filtering applications due to its surface mount design and output impedance of 1000 OHM.
BLM15HB121SN1D
BLM15HB121SN1D by Murata Manufacturing is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This filter is commonly used in applications requiring noise suppression in data lines, with dimensions of L1.0XB0.5XH0.5 (mm) and a rated current of 0.3 A.
D-08C2A
Tokin
DATA LINE FILTER; Maximum DC Resistance: .07 ohm; Rated Current: .5 A; Width (mm): 16.0; Rated Voltage: 50 V; Dimensions: L21.0XB16.0XH14.0 (mm)/L0.827XB0.63XH0.551 (inch);
IP4256CZ5-W,115
NXP Semiconductors' IP4256CZ5-W,115 is a 5-terminal data line filter with max operating temp of 85°C and min of -40°C. It features surface mounting type, tin terminal finish, and plastic package material. Ideal for applications requiring noise suppression in data lines.
ELKE103FA
Panasonic
Panasonic ELKE103FA is a 3-terminal data line filter with 50V rated voltage and 2A rated current. With dimensions of L3.2XB1.8XH2.2 (mm), it's ideal for surface mount applications, offering max DC resistance of 0.02 ohm and capacitance of 10000 uF. Operating b/w -20 to 85 °C, it ensures efficient filtering in electronic devices.
BLM18PG181SN1D
Murata Manufacturing's BLM18PG181SN1D is a chip bead data line filter with 2 terminals, rated for 1.5A current and 180 ohm output impedance. It operates b/w -55°C to 125°C, ideal for surface mount applications in filtering frequencies from 100 MHz with dimensions of L1.6xB0.8xH0.8 mm.
NFM21PC474R1C3D
Murata Manufacturing's NFM21PC474R1C3D is a data line filter with 16V rated voltage, 470000uF capacitance, and 2A rated current. It features a feed through capacitor design for noise suppression in electronic circuits. Ideal for surface mount applications requiring high insulation resistance and low DC resistance.
DLM11GN601SD2D
Murata's DLM11GN601SD2D is a data line filter with 2 functions, rated at 5V and 0.1A. It offers high insulation resistance of 100 Mohm, operates b/w -40°C to 85°C, and has an output impedance of 600 ohms. Ideal for surface mount applications in electronic devices requiring noise filtering.
P0420NLT
Pulse Electronics
Pulse Electronics P0420NLT is a data line filter with 2 functions, AEC-Q200 screening. It has inductance of 1320uH, max operating temp of 120°C, and rated current of 3.3A. Ideal for automotive applications due to its surface mounting type and compact dimensions (L19.56xB17.02xH9.91mm).
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SZEMI2121MTTAG
SZEMI2121MTTAG by Onsemi is a Data Line Filter with 8 terminals, rated for 0.1A current. It operates b/w -40°C to 85°C and has matte tin finish. With dimensions of 2.2mm x 2.0mm x 0.8mm, it's ideal for applications requiring surface mount filters in electronic devices.
SZEMI8142MUTAG
DATA LINE FILTER; Maximum DC Resistance: 6 ohm; Rated Current: .1 A; Output Impedance (ohm): 50 OHM; Packing Method: TR; Width (mm): 1.35;
SZEMI2180MTTBG
DATA LINE FILTER; Maximum DC Resistance: 5 ohm; Minimum Operating Temperature: -40 Cel; No. of Functions: 1; Width (mm): 1.6; Mounting Type: SURFACE MOUNT;
SZEMI4192MTTAG
DATA LINE FILTER; Maximum DC Resistance: 5 ohm; Output Impedance (ohm): 50 OHM; No. of Functions: 2; Length: 2.5 mm; Width (mm): 2;
SZEMI4193MTTAG
DATA LINE FILTER; Maximum DC Resistance: 5 ohm; Rated Current: .1 A; Minimum Operating Temperature: -40 Cel; No. of Terminals: 16; Packing Method: TR;
SZEMI7206MUTAG
DATA LINE FILTER; Maximum DC Resistance: 10 ohm; Mounting Type: SURFACE MOUNT; Packing Method: TR; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
SZEMI7208MUTAG
DATA LINE FILTER; Maximum DC Resistance: 10 ohm; Inductance: .017 uH; No. of Functions: 8; No. of Terminals: 16; Width (mm): 1.35;
SZEMI8031MUTAG
DATA LINE FILTER; Rated Current: .1 A; Maximum Operating Temperature: 85 Cel; Width (mm): 1.35; Length: 1.5 mm; Packing Method: TR;
SZEMI8032MUTAG
DATA LINE FILTER; Rated Current: .1 A; No. of Terminals: 6; Minimum Operating Temperature: -40 Cel; Packing Method: TR; Width (mm): 1.35;
SZEMI8033MUTAG
DATA LINE FILTER; Rated Current: .1 A; Maximum Operating Temperature: 85 Cel; No. of Terminals: 6; Output Impedance (ohm): 50 OHM; Minimum Operating Temperature: -40 Cel;
SZEMI8041MUTAG
DATA LINE FILTER;
SZEMI8042MUTAG
SZEMI8043MUTAG
SZEMI9408MUTAG
DATA LINE FILTER; Height: .55 mm; Package Material: PLASTIC/EPOXY; Mounting Type: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; JESD-609 Code: e3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved