Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's NFL21SP107X1C3D is a 16V data line filter with 1000 Mohm insulation resistance. Featuring 0.135 uH inductance and 44 uF capacitance, it operates b/w -55 to 125 °C. Ideal for surface mount applications, this filter has three terminals and is packed in tape format.
Median Price
$0.455
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
RS (Exports)
1+ parts
-
100+ parts
1k+ parts
10k+ parts
$0.312
Nova Conductors
$0.349
Component Electronics Inc.
$1.540
$1.150
$1.000
Chip Stock
Vyrian
Lantek
J2 Sourcing AB
Sensible Micro Corp
Resion
Prism Electronics
Bastille Electronics
$0.332
$0.315
$0.311
Continental Prestige Electronics
$0.342
Argo Parts USA
$0.339
Aztec Data Supply Inc.
$1.890
Corohmni
$2.190
Modulus Dynamics
$3.212
AZTECH Wire
$6.903
Perfect Parts
Kepictronics
Speed Components Ltd (Excess)
High insulation resistance ensures reliable and safe operation of the data line filter, reducing the risk of short circuits or malfunctions.
Suitable for filtering data lines operating at 16 volts, making it compatible with a wide range of electronic devices.
Having 3 terminals allows for easy and secure connection of the data line filter in the circuit.
Specifically designed to filter data signals, ensuring clean and interference-free transmission.
With a high maximum operating temperature, this data line filter can withstand harsh environments and prolonged use.
Can operate in extremely low temperatures, making it suitable for a variety of industrial and commercial applications.
TIN terminal finish provides good conductivity and corrosion resistance, ensuring long-term reliability.
The inductance value helps in filtering out high-frequency noise from the data line, improving signal quality.
Compact width allows for space-efficient installation in electronic devices without compromising performance.
Small length enables easy integration into circuit boards or assemblies where space is limited.
Taped packaging simplifies handling and storage of multiple data line filters, especially during assembly processes.
Surface mount design offers easy and secure mounting on PCBs, reducing assembly time and ensuring proper alignment.
Compact dimensions make this data line filter suitable for applications where space is limited, without compromising on performance.
With a rated current of 0.2 A, this data line filter can effectively filter out noise and interference without exceeding its current rating.
Low height profile enables installation in slim electronic devices or densely populated PCBs without adding bulk.
The capacitance value helps in filtering out low-frequency noise from the data line, ensuring reliable data transmission.
Data Line Filters NFL21SP107X1C3D attributes and parameters. Explore more Data Line Filters devices from Murata Manufacturing
Additional Features:
Capacitance:
Filter Type:
Height:
Inductance:
Minimum Insulation Resistance:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Rated Current:
Rated Voltage:
Terminal Finish:
Width (mm):
NFL21SP107X1C3D Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Obsolescence/ EOL - Mult Series 01/Apr/2022
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
SMBJ18CA
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
1N4148
Vicor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
Panjit International
MBR0540T1G
Onsemi
MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
2N2222A
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
Won-top Electronics
BAV99
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Changzhou Starsea Electronics
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
BLM18BB331SN1D
Murata Manufacturing
Murata Manufacturing's BLM18BB331SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers an output impedance of 330Ω and max DC resistance of 0.58Ω. Ideal for surface mount applications, this ferrite chip filter has a rated current of 0.4A and is commonly used in electronic devices for noise suppression at frequencies up to 100MHz.
BLM18AG601SN1D
Murata's BLM18AG601SN1D is a chip bead data line filter with 2 terminals, rated for 0.5A current and 600 ohm output impedance. It operates b/w -55°C to 125°C, suitable for surface mount applications in filtering frequencies from 100 MHz with dimensions of L1.6xB0.8xH0.8 mm.
BMB2A0300LN2
TE Connectivity
TE Connectivity's BMB2A0300LN2 is a 0805 case FERRITE CHIP filter with 300 OHM output impedance, 0.15 ohm DC resistance, and 0.6 A rated current. Ideal for data line filtering applications, this multilayer chip operates b/w -55 to 125 °C at frequencies ranging from 100 MHz.
7116
Api Technologies
DATA LINE FILTER; Maximum DC Resistance: .6 ohm; Mounting Type: THROUGH HOLE MOUNT; Height: 8.89 mm; No. of Functions: 2; Dimensions: L10.16XB5.08XH8.89 (mm)/L0.4XB0.2XH0.35 (inch);
SRF3216-102Y
Bourns
Bourns SRF3216-102Y is a data line filter with 2 functions, rated voltage of 50V, and max operating temperature of 125°C. It has min insulation resistance of 10 Mohm and DC resistance of 1 ohm. Ideal for applications requiring filtering in compact spaces with surface mounting type.
7427927160
Wuerth Elektronik & Kg
Wurth Elektronik 7427927160 is a FERRITE CHIP data line filter with 2 terminals, rated at 0.4A. It operates b/w -55 to 125 °C and has a max DC resistance of 0.3 ohm. Suitable for surface mount applications, it offers an output impedance of 60 OHM and comes in dimensions L1.0xB0.5xH0.5 mm, ideal for noise suppression in electronic circuits.
MMZ2012R102AT
TDK
The TDK MMZ2012R102AT is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. With dimensions of L2.0xB1.25xH0.85 (mm), it offers a max DC resistance of 0.3 ohm and output impedance of 1000 OHM, suitable for surface mount applications in various electronic devices.
ECLAMP2456P.TCT
Semtech
Semtech's ECLAMP2456P.TCT is a 5V data line filter with 6 functions and 12 terminals. It offers 40 dB attenuation at 2700 MHz, operating from -40 to 85°C. Ideal for applications requiring surface mount filters with dimensions of L3.1xB1.7xH0.65 mm in plastic packaging on tape and reel.
MPZ1608Y101BTA00
TDK's MPZ1608Y101BTA00 is a 0603 chip bead filter with 2 terminals. With a max temp of 125°C and min of -55°C, it operates b/w 100 MHz to DC resistance of 0.04 ohm. Ideal for data line filtering, this ferrite chip measures L1.6xB0.8xH0.8 mm and has an output impedance of 100 OHM at 2A rated current.
NZF220DFT1G
NZF220DFT1G by Onsemi is a Data Line Filter with 2 functions and 5 terminals. Featuring FERRITE CHIP filter type, it has a width of 1.35mm and max DC resistance of 110 ohm. Ideal for applications requiring a compact surface mount solution with an output impedance of 50 OHM.
MMZ1608R102ATA00
TDK MMZ1608R102ATA00 is a 0603 chip bead filter with 2 terminals. It offers max operating temp of 125°C and min of -55°C, with width of 0.8mm and length of 1.6mm. Ideal for data line filtering applications due to its ferrite construction, output impedance of 1000Ω, and rated current of 0.4A.
BLM15HD102SN1D
BLM15HD102SN1D by Murata is a chip bead data line filter with 1 function, operating b/w -55 to 125°C. It has a DC resistance of 1.25 ohm, suitable for frequencies ranging from 100 MHz to 1000 MHz. Ideal for surface mount applications in electronic devices requiring impedance of 1000 ohms.
ACM2012-121-2P-T002
TDK's ACM2012-121-2P-T002 is a FERRITE CHIP filter with 2 functions, rated at 50V and 0.37A. With dimensions of L2.0xB1.2xH1.3 (mm), it offers high insulation resistance for data line filtering applications in electronics, ensuring reliable performance from -40 to 85 °C temperatures.
FBMH1608HM101-T
Taiyo Yuden
Taiyo Yuden's FBMH1608HM101-T is a chip bead data line filter with 2 terminals, ideal for applications requiring noise suppression. With a max operating temperature of 85°C and DC resistance of 0.035 ohm, it offers effective filtering up to 100 MHz. This surface mount filter measures L1.6xB0.8xH0.8 mm and is suitable for high-speed data transmission systems.
BLM18PG471SH1D
BLM18PG471SH1D by Murata is a chip bead data line filter with AEC-Q200 screening. It has 2 terminals, measures 1.6x0.8x0.8mm, and offers an output impedance of 470 ohm at a rated current of 1A. Ideal for surface mount applications, it operates b/w -55 to 125°C and is designed for frequencies ranging from 100 MHz with max DC resistance of 0.2 ohm.
BK1608TS102-T
BK1608TS102-T by Taiyo Yuden is a chip bead data line filter with 2 terminals, ideal for surface mount applications. Featuring a ferrite chip construction, it offers a max operating temperature of 125°C and a min frequency of 100 MHz. With dimensions of L1.6xB0.8xH0.8 (mm), this filter has an output impedance of 1000 ohm and is suitable for various electronic devices requiring noise suppression in the range of 100 MHz.
BLM21AG102SN1D
Murata Manufacturing's BLM21AG102SN1D is an 0805 chip bead filter with 2 terminals. It operates b/w -55 to 125 °C, offering 0.28 ohm DC resistance and 1000 OHM output impedance at 100 MHz. Ideal for data line filtering applications, it measures L2.0XB1.25XH0.85 mm and has a rated current of 0.5 A.
B82789C0513H002
TDK B82789C0513H002 is an 80V data line filter with 51uH inductance and 0.55 ohm max DC resistance. It has 2 functions, 4 terminals, and operates b/w -55 to 150°C. Ideal for applications requiring a compact surface mount filter with a rated current of 0.25A.
MI0603L221R-10
Laird Technologies
MI0603L221R-10 by Laird Technologies is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min frequency of 25 MHz. This filter is used for surface mount applications to reduce noise in data lines.
MPZ1608S221A
TDK's MPZ1608S221A is a FERRITE CHIP filter with 2 terminals, rated for 2.2A current and 220Ω output impedance. Ideal for data line filtering applications due to its compact size (1.6mm x 0.8mm x 0.8mm) and wide operating temperature range (-55°C to 125°C).
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NFL21SP106X1C3D
The Murata Manufacturing NFL21SP106X1C3D is a data line filter with 1000 Mohm insulation resistance, 16V rated voltage, and 0.68 uH inductance. It is suitable for applications requiring noise suppression in data lines, offering a compact size of L2.0XB1.25XH0.85 (mm) and surface mounting type.
NFL21SP206X1C7D
Murata Manufacturing's NFL21SP206X1C7D is a 3-terminal data line filter with 1000 Mohm insulation resistance and 16V rated voltage. With inductance of 0.7uH, it operates b/w -55 to 125 °C, ideal for surface mount applications requiring capacitance of 240uF.
NFL21SP506X1C3D
DATA LINE FILTER; Rated Current: .15 A; Width (mm): 1.25; Packing Method: TR, PAPER, 7 INCH; No. of Terminals: 3; JESD-609 Code: e3;
NFL21SP207X1C3D
DATA LINE FILTER; Rated Current: .25 A; Inductance: .072 uH; Capacitance: 22 uF; Terminal Finish: TIN; Dimensions: L2.0XB1.25XH0.85 (mm)/L0.079XB0.049XH0.033 (inch);
NFL21SP307X1C3D
DATA LINE FILTER; Rated Current: .3 A; Length: 2 mm; Maximum Operating Temperature: 125 Cel; Terminal Finish: TIN; JESD-609 Code: e3;
NFL21SP706X1C3D
DATA LINE FILTER; Rated Current: .15 A; Additional Features: PI-TYPE CIRCUIT; No. of Functions: 1; Maximum Operating Temperature: 125 Cel; Terminal Finish: TIN;
NFL21SP407X1C3D
Murata Manufacturing's NFL21SP407X1C3D is a 16V data line filter with 1000 Mohm insulation resistance. Featuring 0.034uH inductance, it operates b/w -55 to 125 °C and has 0.3A rated current. Ideal for surface mount applications, this filter measures L2.0XB1.25XH0.85 (mm) and is used to enhance data line filtering efficiency in electronic devices.
NFL21SP107X1C3B
DATA LINE FILTER; Rated Current: .2 A; Rated Voltage: 16 V; Packing Method: BULK; Inductance: .135 uH; Height: .85 mm;
NFL21SP157X1C3B
DATA LINE FILTER; Rated Current: .2 A; Terminal Finish: TIN; Length: 2 mm; Mounting Type: SURFACE MOUNT; Height: .85 mm;
NFL21SP157X1C3D
DATA LINE FILTER; Rated Current: .2 A; Maximum Operating Temperature: 125 Cel; Length: 2 mm; Height: .85 mm; Width (mm): 1.25;
NFL21SP706X1C3B
DATA LINE FILTER; Rated Current: .15 A; Terminal Finish: TIN; Height: .85 mm; Maximum Operating Temperature: 125 Cel; Dimensions: L2.0XB1.25XH0.85 (mm)/L0.079XB0.049XH0.033 (inch);
NFL21SP107X1C3K
DATA LINE FILTER; Rated Current: .2 A; Maximum Operating Temperature: 125 Cel; Rated Voltage: 16 V; Packing Method: TAPE AND REEL; No. of Functions: 1;
NFL21SP107X1C3L
DATA LINE FILTER; Rated Current: .2 A; Minimum Insulation Resistance: 1000 Mohm; Manufacturer Series: NFL21S; Height: .85 mm; Rated Voltage: 16 V;
NFL21SP157X1C3K
DATA LINE FILTER; Rated Current: .2 A; Dimensions: L2XB1.25XH0.85 (mm); Width (mm): 1.25; Minimum Insulation Resistance: 1000 Mohm; Minimum Operating Temperature: -55 Cel;
NFL21SP157X1C3L
DATA LINE FILTER; Rated Current: .2 A; Maximum Operating Temperature: 125 Cel; Packing Method: TAPE AND REEL; No. of Functions: 1; Minimum Insulation Resistance: 1000 Mohm;
NFL21SP506X1C3L
DATA LINE FILTER; Rated Current: .15 A; JESD-609 Code: e3; No. of Functions: 1; Minimum Insulation Resistance: 1000 Mohm; Height: .85 mm;
NFL21SP107X1C3
DATA LINE FILTER; Maximum DC Resistance: 2 ohm; Rated Current: .2 A; Width (mm): 1.25; Capacitance: 44 uF; Length: 2 mm;
NFL21SP157X1C3
DATA LINE FILTER; Maximum DC Resistance: 2 ohm; Rated Current: .2 A; Width (mm): 1.25; Dimensions: L2.0XB1.25XH0.85 (mm)/L0.079XB0.049XH0.033 (inch); Additional Features: PI-TYPE CIRCUIT; CUT-OFF FREQUENCY 150 MHZ;
NFL21SP106X1C3
DATA LINE FILTER; Rated Current: .1 A; Height: .85 mm; Width (mm): 1.25; Rated Voltage: 16 V; Minimum Insulation Resistance: 1000 Mohm;
NFL21SP106X1C3B
DATA LINE FILTER; Rated Current: .1 A; No. of Terminals: 2; Capacitance: 670 uF; Length: 2 mm; Height: .85 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved