Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The TDK B82432C1103K000 is a surface mount fixed inductor with 10uH nominal inductance, suitable for RF applications. It has a max operating temperature of 150°C and a self-resonance frequency of 28MHz. This general purpose inductor features dual-ended terminals and J bend shape, making it ideal for various electronic circuits.
Median Price
$0.348
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.720
100+ parts
$0.488
1k+ parts
$0.399
10k+ parts
$0.316
Newark
$0.728
$0.507
$0.426
$0.380
Bürklin Elektronik
$1.280
$0.710
$0.610
-
Arrow
$0.294
Verical
$0.295
Chip1Stop
$0.338
TTI Europe
$0.298
Element14
$0.505
$0.400
$0.363
Farnell
$0.350
$0.297
$0.280
DigiKey
$0.309
RS (Exports)
Nova Conductors
$0.451
Vyrian
Chip Stock
Cogito LLC
LIBRA Elektronik GmbH
VNN
ComSIT Distribution GmbH
Semicontronic
$0.253
$0.247
$0.245
Argo Parts USA
$0.437
Netroflash
$0.428
$0.419
Corohmni
$0.475
Ampacity Inc.
$0.510
Advanced Electronics
$0.532
$0.490
$0.459
Aztec Data Supply Inc.
$0.790
Metaverse IC Inc.
QUARKTWIN TECHNOLOGY LTD
Continental Prestige Electronics
$0.370
$0.329
$0.287
Perfect Parts
Authorized Procurement Solutions
Abacus Technologies
Robosynatics
Lucentia Tech
$7.592
Surface mount technology makes it easy to integrate this inductor into printed circuit boards, saving space and reducing assembly time.
With a nominal inductance of 10 uH, this inductor is suitable for various RF applications requiring a specific level of inductance.
The high maximum rated current of 0.32 A ensures that this inductor can handle current loads without overheating or performance degradation.
Ferrite core material offers high magnetic permeability, making this inductor efficient for RF applications and minimizing energy loss.
Low DC resistance of 0.98 ohm ensures efficient power transfer and minimal power loss within the inductor.
Fixed Inductors B82432C1103K000 attributes and parameters. Explore more Fixed Inductors devices from TDK
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
Minimum Quality Factor (at L-nom):
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Special Feature:
Package Shape:
Case or Size Code:
Shielded:
Construction:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
Terminal Finish:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
JESD-609 Code:
Reference Standard:
B82432C1103K000 Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
TDK was founded as a venture enterprise in 1935 for the purpose of industrializing a magnetic material called ferrite, which was invented at the Tokyo Institute of Technology. TDK's corporate motto is "Contribute to culture and industry through creativity," a message that embodies the company's founding spirit. Guided by this spirit, in the ensuing year TDK has sought to refine its materials and process technologies, as it develops new products that satisfy market needs. Concurrently, TDK advances globalization and diversification of its business operation while actively pursuing M&As, collaboration with external partners and other initiatives. As a result, TDK today is engaged in four main businesses: Passive Components, Sensor Application Products, Magnetic Application Products, and Energy Application Products. Looking ahead, TDK would like to remain a dynamic company that continues to deliver even higher value to all stakeholders, including shareholders, customers, suppliers, employees and local communities, by bringing together the entire Group's strengths while taking full advantage of the strengths of each Group company, and constantly drawing on innovative thinking and a willingness to tackle new challenges.
2N2222A
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Weitron Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
L7805CV
STMicroelectronics
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
MBRS360T3G
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
Alpha & Omega Semiconductor
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
SS14
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
BAV99
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
LIS3DHTR
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
1N4148WS
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2277UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
74477020
Wuerth Elektronik & Kg
The Wurth Elektronik 74477020 is a surface mount, shielded fixed inductor with dual-ended terminal placement. It has a nominal inductance of 100 uH and can handle a max rated current of 2.2 A. This general purpose inductor is commonly used for power applications.
DRA74-470-R
Cooper Industries
GENERAL PURPOSE INDUCTOR; Inductor Application: DC-DC CONVERTER; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
B82464G4222M000
TDK
The TDK B82464G4222M000 is a shielded, surface mount fixed inductor with 2.2uH nominal inductance and 6.5A max rated current. Ideal for power applications, it operates b/w -55°C to 150°C, featuring a ferrite core and AEC-Q200 reference standard compliance.
LPS4018-472MRC
Coilcraft
Coilcraft's LPS4018-472MRC is a shielded, dual-ended fixed inductor with 4.7uH nominal inductance and 1.8A max rated current. Ideal for power applications, it operates b/w -40 to 125°C, featuring a compact SMT package measuring 3.9mm x 3.9mm x 1.7mm.
DFE252012P-1R0M=P2
Toko
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; Shape or Size Description: RECTANGULAR PACKAGE; Maximum Operating Temperature: 125 Cel;
IHLP1616BZER4R7M11
Vishay Intertechnology
Vishay Intertechnology's IHLP1616BZER4R7M11 is a shielded, high current inductor with 4.7uH nominal inductance and 1.7A max rated current. Ideal for general purpose applications, this SMT inductor has a compact 1616 case size and operates b/w -55°C to 125°C temperature range.
B82733F2142B001
TDK's B82733F2142B001 is a dual in-line fixed inductor with 27000 uH nominal inductance, suitable for power applications. It has a max rated current of 1.4 A and operates b/w -40 to 125 °C, featuring a ferrite core and flat terminals. Ideal for PCB mounting, this general purpose inductor offers low DC resistance at 0.44 ohm.
5-1624055-5
TE Connectivity
TE Connectivity 5-1624055-5 is a radial fixed inductor with 1000uH nominal inductance, suitable for RF applications. It has a cylindrical package, 2 terminals, and operates b/w -20 to 80°C. With a self-resonance frequency of 1.3MHz and DC resistance of 2.1 ohm, it's ideal for general purpose use with a min quality factor of 40%.
SRR1260-471K
Bourns
Bourns SRR1260-471K is a shielded, dual-ended surface mount inductor with 470uH nominal inductance. Ideal for power applications, it operates b/w -40 to 125°C with a max rated current of 0.95A and self-resonance frequency of 2.6MHz.
BWVS005050404R7M00
Chilisin Electronics
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
MLZ2012N100LT000
MLZ2012N100LT000 by TDK is a 0805 fixed inductor with 10uH nominal inductance, 0.3 ohm DC resistance, and 20% tolerance. It is a general purpose inductor suitable for various applications requiring a max rated current of 0.5A and operating temperatures ranging from -55 to 125 °C.
MLZ2012N220LT000
MLZ2012N220LT000 by TDK is an 0805 SMT fixed inductor with 22uH nominal inductance, 0.67 ohm DC resistance, and 0.3A max rated current. Ideal for general purpose applications requiring a compact, shielded dual-ended inductor with a ferrite core and operating temperature range of -55 to 125°C.
90-47
Coilcraft 90-47 is a general purpose RF inductor with 680uH nominal inductance, suitable for RF applications. It has a max operating temperature of 105°C and self-resonance frequency of 2MHz. With a DC resistance of 22.3 ohm, it features an axial package style and ferrite core material.
LQG15HN4N3S02D
Murata Manufacturing
Murata Manufacturing's LQG15HN4N3S02D is a 0402-sized fixed inductor with 0.0043 uH nominal inductance, suitable for RF applications. With a max operating temperature of 125°C and self-resonance frequency of 6000 MHz, it offers high quality factor and low DC resistance at 0.15 ohm. The dual-ended terminal placement and multilayer chip construction make it ideal for general purpose inductor needs.
SRR1005-100M
The Bourns SRR1005-100M is a shielded, surface mount inductor with 10uH nominal inductance and 2A max rated current. Ideal for power applications, it operates b/w -40 to 125°C with a self-resonance frequency of 30MHz.
XFL4020-102MEB
Coilcraft XFL4020-102MEB is a shielded, surface mount inductor with 1uH nominal inductance and 11A max rated current. Ideal for power applications, it operates b/w -40 to 125°C, featuring a self-resonance frequency of 64MHz.
SRN8040-2R2Y
Bourns SRN8040-2R2Y is a shielded, surface mount fixed inductor with 2.2uH nominal inductance and 6.3A max rated current. Ideal for power applications, it features a self-resonance frequency of 40MHz and operates b/w -40°C to 125°C temperature range.
B78108S1472K000
B78108S1472K000 by TDK is a 4.7 uH general purpose inductor with 0.34 ohm DC resistance and 95 MHz self-resonance frequency. It has a max operating temperature of 125°C, making it suitable for RF applications requiring high Q factor and reliability in harsh environments. The axial package style with tubular construction and tin finish is ideal for RF circuits where space-saving and performance are crucial.
NRS4018T100MDGJV
Taiyo Yuden
Taiyo Yuden's NRS4018T100MDGJV is a SMT fixed inductor with 10uH nominal inductance, 1.2A max current, and -40 to 125°C operating temp range. Ideal for power applications due to its general purpose design and ferrite core material.
LQW15DN100M00D
Murata Manufacturing's LQW15DN100M00D is a shielded SMT inductor with 10uH nominal inductance, 5.405 ohm DC resistance, and 20 MHz self-resonance frequency. Ideal for RF applications, this general-purpose inductor operates b/w -40°C to 85°C with a max rated current of 0.12A.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
B82471A1104K000
The TDK B82471A1104K000 is a shielded, surface mount fixed inductor with 100uH nominal inductance. It has a max rated current of 0.52A and operates b/w -55°C to 150°C. Ideal for power applications requiring a general purpose inductor with a compact rectangular package design.
B82472G4104M000
The TDK B82472G4104M000 is a shielded, surface mount fixed inductor with 100uH nominal inductance. It operates b/w -55°C to 125°C, with a max rated current of 0.56A. Ideal for power applications requiring a general purpose inductor in a compact rectangular package.
B82472-G4104-M
The TDK B82472-G4104-M is a shielded, surface mount fixed inductor with 100uH nominal inductance. It operates b/w -55 to 125 °C and has a max rated current of 0.56A. Ideal for power applications, this general purpose inductor features dual-ended terminals and ferrite core material.
B82462A4473K000
The TDK B82462A4473K000 is a fixed inductor with 47uH nominal inductance, 0.64 ohm DC resistance, and 10% tolerance. It is a power inductor suitable for general purpose applications, featuring dual-ended terminals and ferrite core material. This SMT component operates b/w -55°C to 150°C with a max rated current of 0.54A.
B82476A1104M000
B82476A1104M000 by TDK is a surface mount fixed inductor with a nominal inductance of 100 uH and max rated current of 1.3 A. It is a general purpose inductor suitable for power applications, with a rectangular package measuring 12.95 mm in length, 9.4 mm in width, and 5.08 mm in height.
B82422-A1103-K100
Siemens
Siemens B82422-A1103-K100 is a surface mount fixed inductor with 10uH nominal inductance, 0.18A max current, and 1.6 ohm DC resistance. Ideal for RF applications due to its 25MHz self-resonance frequency and ferrite core material. Dual-ended terminals with J bend shape make it versatile for various circuit designs.
B82422A1103K100
The TDK B82422A1103K100 is a 10uH SMT inductor with 27 min Q factor, suitable for RF applications. It has a max operating temp of 150°C, 0.18A rated current, and self-resonance frequency of 25MHz. Ideal for general purpose use in automotive electronics due to AEC-Q200 compliance.
B82498F1472J000
The TDK B82498F1472J000 is a 0805 SMT fixed inductor with 4.7uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125°C, DC resistance of 3.8 ohm, and self-resonance frequency of 210 MHz. Ideal for general purpose use due to its compact rectangular package design and high quality factor at nominal inductance.
B82479-A1104-M
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: YES; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier;
B82472P6104M000
B82422A1102K100
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
B82422-A1102-K100
Siemens B82422-A1102-K100 is a surface mount RF inductor with 1uH nominal inductance, 0.38A max current, and 320MHz self-resonance frequency. Ideal for general purpose applications requiring high quality factor and low DC resistance.
B82464-G4103-M
B82462G4103M000
B82462G4103M000 by TDK is a shielded, surface mount fixed inductor with 10uH nominal inductance and 1.5A max rated current. Ideal for power applications, this general purpose inductor has a DC resistance of 0.062 ohm and operates b/w -55°C to 150°C temperature range.
B82479A1105M000
The TDK B82479A1105M000 is a surface mount fixed inductor with 1000uH nominal inductance, suitable for power applications. It has a max rated current of 0.56A and operates b/w -55°C to 150°C. The inductor features dual-ended terminals, ferrite core material, and comes in a rectangular package measuring 18.54mm x 15.24mm x 7.11mm (LxWxH).
B82498F3331J000
B82476A1103M000
B82476A1103M000 by TDK is a fixed inductor with 10uH nominal inductance, 3.9A max rated current, and -55 to 150°C operating temperature range. Ideal for power applications, this SMT inductor features dual-ended terminals and ferrite core material.
B82422A1104K100
B82422-A1104-K100
Siemens B82422-A1104-K100 is a surface mount RF inductor with 100uH nominal inductance, 0.065A max current, and 27 min quality factor at 0.1MHz. It is a general purpose inductor with ferrite core, suitable for various applications requiring high-frequency performance.
B82432A1103K000
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved