Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BK2125LL560-T by Taiyo Yuden is a chip bead data line filter with 600V rated voltage and 2 terminals. It operates b/w -55°C to 125°C, has a DC resistance of 0.2 ohm, and output impedance of 56 ohm. Ideal for surface mount applications in electronics requiring noise suppression at frequencies up to 100 MHz.
Median Price
$0.100
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$0.041
1k+ parts
10k+ parts
$0.018
ACDS - Activité Composants Distribution Service
-
VNN
Prism Electronics
Nova Conductors
Ampacity Inc.
$0.085
Authorized Procurement Solutions
Cyclops Electronics Ltd (Excess)
Glotronic Ltd.
Aranea Global
Chip beads are known for their high frequency performance and noise suppression capabilities, making this product ideal for filtering out unwanted frequencies in data lines.
With a high rated voltage of 600V, this data line filter can handle high voltage applications effectively, ensuring reliable performance.
Having 2 terminals allows for easy installation and connection, making it convenient to integrate this data line filter into existing circuit designs.
Ferrite chip filters are known for their excellent EMI suppression capabilities, making this product effective in reducing electromagnetic interference in data lines.
With a high maximum operating temperature of 125°C, this data line filter can withstand high temperatures, ensuring stable performance even in demanding environments.
The low minimum operating temperature of -55°C allows this data line filter to function effectively in cold environments, making it versatile for a wide range of operating conditions.
The compact width of 1.25mm makes this data line filter suitable for space-constrained applications, allowing for easy integration into small electronic devices.
With a minimum frequency rating of 100MHz, this data line filter is effective in filtering out high-frequency noise and interference, ensuring clean and reliable data transmission.
The low maximum DC resistance of 0.2 ohm ensures minimal voltage drop across the filter, maintaining signal integrity and efficiency in data transmission.
The short length of 2mm makes this data line filter compact and suitable for applications where space is limited, allowing for easy integration into circuit designs.
With a maximum frequency rating of 100MHz, this data line filter can effectively filter out unwanted high-frequency noise, ensuring clean and reliable data signals.
The output impedance of 56 ohms helps match impedance levels in data lines, reducing signal reflections and loss, ensuring optimal signal quality.
The tape and reel packaging method provides convenience in handling and installation, making it easy to store and use multiple filters in production processes.
The surface mounting type allows for easy and secure installation on PCBs, saving space and simplifying assembly processes for electronic devices.
The compact dimensions of 2.0x1.25x0.85mm (0.079x0.049x0.033 inch) make this data line filter suitable for small electronic devices where space is limited, providing effective EMI suppression.
With a rated current of 0.6A, this data line filter can handle current fluctuations effectively, ensuring reliable performance and protection for electronic components.
The low height of 0.85mm allows for compact integration of this data line filter into electronic devices, maximizing space efficiency and functionality.
Made of ferrite material, this data line filter offers high magnetic permeability and EMI suppression properties, making it an effective solution for filtering out noise and interference in data lines.
Data Line Filters BK2125LL560-T attributes and parameters. Explore more Data Line Filters devices from Taiyo Yuden
Case Code:
Construction:
Maximum DC Resistance:
Filter Type:
Maximum Frequency:
Minimum Frequency:
Height:
Length:
Material:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Rated Voltage:
Sub-Category:
Width (mm):
BK2125LL560-T Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Obsolescence/ EOL - Mult Series 25/Feb/2021
Taiyo Yuden Co., Ltd. engages in manufacture and sale of electronic components. Its products include ceramic capacitors, inductors, noise suppression components, multilayer ceramic devices, chip antennas, and wireless modules. The company was founded by Hikohachi Sato on March 23, 1950 and is headquartered in Tokyo, Japan.
2N2222A
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
1N4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
BAV99
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
SZNUP2105LT1G
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
SMBJ18CA
General Instrument
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
General Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Toshiba
Dc Components
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Rectron
Micro Commercial Components
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
M39029/58360
Esterline Technologies
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;
4400-099LF
Cts
4400-099LF by Cts is a Data Line Filter with 20000 Mohm Min Insulation Resistance, 50 V Rated Voltage, and FEED THROUGH CAPACITOR filter type. It operates b/w -55 to 125 °C, has a Max Insertion Loss of 70 dB, and a Capacitance of 50000 uF. Ideal for panel mounting applications requiring up to 10 A rated current.
ACM2012-900-2P-TL
TDK
The TDK ACM2012-900-2P-TL is a Data Line Filter with 2 functions, rated voltage of 50V, and max operating temperature of 85°C. It has 4 terminals, DC resistance of 0.19 ohm, and output impedance of 90 ohm. Ideal for surface mount applications in electronics to filter data lines efficiently.
MI0805J102R-10
Laird Technologies
MI0805J102R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With dimensions of L2XB1.25XH.9 (mm), it has a max frequency of 1000 MHz and DC resistance of 0.15 ohm. Ideal for surface mount applications in electronic devices requiring noise suppression up to 25 MHz.
MMZ1608B601C
The TDK MMZ1608B601C is a chip bead data line filter with FERRITE CHIP technology. It has a max operating temperature of 125°C and min of -55°C, with a rated current of 0.5A. Ideal for surface mount applications requiring an output impedance of 600 ohms in compact dimensions of L1.6xB0.8xH0.6 mm.
742792113
Wuerth Elektronik & Kg
Wurth Elektronik 742792113 is a FERRITE CHIP Data Line Filter with 2 terminals, rated for 3A current. It has dimensions of L3.2xB1.6xH1.1 mm and operates b/w -55 to 125 °C. Ideal for surface mount applications requiring output impedance of 120 ohm.
BNX023-01L
Murata Manufacturing
Murata Manufacturing's BNX023-01L is a data line filter with 2 functions and 4 terminals. It offers 35 dB attenuation at 1000 MHz, rated for 100 V and 20 A. Ideal for applications requiring noise suppression in data lines, it operates b/w -40 to 125 °C.
W2F15C2228AT1F
KYOCERA AVX
KYOCERA AVX's W2F15C2228AT1F is a data line filter with 3 terminals, rated voltage of 50V, and capacitance of 2200uF. It features FEED THROUGH CAPACITOR type filtering for applications requiring insulation resistance of 1000 Mohm and operating temperatures from -55 to 125 °C. Ideal for surface mount installations in various electronic devices.
EMI8143MUTAG
EMI8143MUTAG by Onsemi is a data line filter with 16 terminals, operating b/w -40°C to 85°C. It has a power supply of 3.3V and features nickel palladium gold terminal finish. Ideal for applications requiring surface mount filters in plastic packages.
4206-001LF
4206-001LF by Cts is a Data Line Filter with 10000 Mohm Min Insulation Resistance, 500 V Rated Voltage, and 70 dB Max Insertion Loss. Ideal for applications requiring noise suppression in data lines, it has a capacitance of 3000 uF and can handle up to 25 A current at temperatures up to 125 °C.
744226S
744226S by Wurth Elektronik is a UL-approved data line filter with 2 functions, rated at 80V and inductance of 10uH. It operates b/w -40°C to 125°C, has a max DC resistance of 0.08 ohm, and an output impedance of 920 ohm. This surface mount filter is ideal for applications requiring noise suppression in data lines.
W2H15C1038AT1A
KYOCERA AVX's W2H15C1038AT1A is a 50V data line filter with 4 terminals. Featuring feed through capacitor technology, it has dimensions of L2.01xB1.25xH1.14 mm and is surface mountable. Ideal for applications requiring noise suppression in electronic circuits.
742792095
Wurth Elektronik 742792095 is a FERRITE CHIP Data Line Filter with 2 terminals, suitable for surface mount applications. It operates b/w -55 to 125 °C, with dimensions of L2.0xB1.2xH0.9 (mm). Featuring a max frequency of 100 MHz and output impedance of 2700 OHM, it has a DC resistance of 0.6 ohm and rated current of 0.2 A.
NFM18CC221R1C3D
Murata Manufacturing's NFM18CC221R1C3D is a data line filter with 1000 Mohm insulation resistance, 16V rated voltage, and 220uF capacitance. It is a feed through capacitor suitable for applications requiring filtering of data lines in electronic circuits.
MMZ2012Y152BT000
MMZ2012Y152BT000 by TDK is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. It has a max DC resistance of 0.4 ohm, output impedance of 1500 ohm, and rated current of 0.5 A. Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering capabilities.
ACT1210L-101-2P-TL00
TDK's ACT1210L-101-2P-TL00 is a Data Line Filter with 10 Mohm Min Insulation Resistance, 80V Rated Voltage, and 100uH Inductance. Ideal for applications requiring noise suppression in data lines while operating within -40 to 125 °C temperature range.
ACM2012-201-2P-T002
ACM2012-201-2P-T002 by TDK is a FERRITE CHIP data line filter with 2 functions. It has a rated voltage of 50V and can operate in temperatures ranging from -40 to 85°C. It is suitable for surface mount applications requiring a compact size (L2.0XB1.2XH1.3 mm) and offers a min insulation resistance of 10 Mohm.
ILHB0603ER600V
Vishay Intertechnology
Vishay Intertechnology's ILHB0603ER600V is a 2-terminal FERRITE CHIP filter with dimensions of 1.6x0.8x0.8mm, suitable for surface mount applications. It offers a max operating temperature of 125°C and a rated current of 2A, making it ideal for data line filtering in electronic devices requiring impedance of 60 ohms at frequencies ranging from 100 MHz to DC.
744227S
744227S by Wurth Elektronik is a UL-approved data line filter with 2 functions, rated at 80V and inductance of 51uH. It operates b/w -40°C to 125°C, has a max DC resistance of 0.16 ohm, and output impedance of 5500 ohm. Ideal for surface mount applications requiring a compact L9.2xB6.0xH5.0mm size and rated current of 1A.
BLM18PG600SN1D
Murata Manufacturing's BLM18PG600SN1D is a chip bead data line filter with 2 terminals, operating from -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a DC resistance of 0.1 ohm and output impedance of 60 ohm at frequencies up to 100 MHz. Ideal for surface mount applications, this ferrite chip filter is designed to handle up to 0.5A rated current in various electronic circuits.
ACM2520-102-2P-T002
The TDK ACM2520-102-2P-T002 is a FERRITE CHIP filter with 2 functions, rated at 20V and 0.2A. With dimensions of L2.5xB2.0xH1.2 (mm), it offers high insulation resistance for data line filtering applications in electronics, operating b/w -40 to 85 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BK2125LM182-TV
Taiyo Yuden
BK2125LM182-TV by Taiyo Yuden is a FERRITE CHIP filter with 2 terminals, rated for 0.3A current. With dimensions of L2.0XB1.25XH1.25 (mm), it has an output impedance of 1800 OHM and max DC resistance of 0.45 ohm. Ideal for data line filtering applications due to its compact size and surface mounting type.
BK2125HS470-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .05 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 1 A;
BK2125HS470-TV
Taiyo Yuden's BK2125HS470-TV is a FERRITE CHIP filter with 2 terminals, rated for 1A current. With dimensions of L2.0xB1.25xH0.85 (mm), it offers 47 OHM output impedance and operates b/w -55 to 125 °C. Ideal for data line filtering in surface mount applications.
BK2125HS102-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .4 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .3 A;
BK2125HM102-T
BK2125HM102-T by Taiyo Yuden is a chip bead data line filter with 400V rated voltage, -55 to 125°C operating temperature range, and 1000 ohm output impedance. Ideal for surface mount applications in electronic devices requiring noise suppression at frequencies up to 100MHz.
BK2125HS102-TV
FERRITE CHIP; Maximum DC Resistance: .4 ohm; Rated Current: .3 A; No. of Terminals: 2; No. of Functions: 1; Width (mm): 1.25;
BK2125HM601-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .25 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .5 A;
BK2125LL121-TV
FERRITE CHIP; Maximum DC Resistance: .3 ohm; Rated Current: .4 A; No. of Terminals: 2; Maximum Operating Temperature: 125 Cel; Width (mm): 1.25;
BK2125LM252-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .75 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .2 A;
BK2125LM252-TV
FERRITE CHIP; Maximum DC Resistance: .75 ohm; Rated Current: .2 A; Maximum Operating Temperature: 125 Cel; Mounting Type: SURFACE MOUNT; Width (mm): 1.25;
BK2125HS101-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .1 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .9 A;
BK2125LM182-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .45 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .3 A;
BK2125HS101-TV
FERRITE CHIP; Maximum DC Resistance: .1 ohm; Rated Current: .9 A; Maximum Operating Temperature: 125 Cel; Output Impedance (ohm): 100 OHM; No. of Terminals: 2;
BK2125HS601-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .3 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .5 A;
BK2125HS601-TV
FERRITE CHIP; Maximum DC Resistance: .3 ohm; Rated Current: .5 A; Length: 2 mm; Height: .85 mm; Maximum Operating Temperature: 125 Cel;
BK2125HM102-TV
FERRITE CHIP; Maximum DC Resistance: .35 ohm; Rated Current: .4 A; Packing Method: TAPE; Minimum Operating Temperature: -55 Cel; Length: 2 mm;
BK2125HS121-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .15 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .8 A;
BK2125HS220-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .05 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 1.2 A;
BK2125HM471-T
BK2125HS241-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .2 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .6 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved