Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BK2125LM252-T by Taiyo Yuden is a 0805 chip bead filter with 200V rating, -55 to 125 °C operating temp, and 2500 ohm output impedance. Ideal for data line filtering applications due to its compact size (L2.0XB1.25XH1.25 mm) and surface mounting type.
Median Price
$0.107
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Elektronika Sales Private Limited
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Semi Source
Vyrian
EMSNET
Bristol Electronics
Sensible Micro Corp
$0.099
Chip Stock
Sea View Technologies
Prism Electronics
Greenchips
SIE Connect GmbH - GreenChips
VNN
PC Components Company LLC
Atlantic Semiconductor
LWI Electronics Inc
Nova Conductors
Ampacity Inc.
$3.400
AZTECH Wire
$19.000
Perfect Parts
Resion (Excess)
Kepictronics
Assy Fe
Authorized Procurement Solutions
Glotronic Ltd.
Bastille Electronics
GreenTree Electronics
Robosynatics
Lucentia Tech
$0.309
$0.286
Chip beads offer compact size and high performance for EMI filtering, making this product suitable for space-constrained applications.
With a high rated voltage, this data line filter can handle a wide range of operating conditions without risking damage.
Ferrite chip filters provide effective noise suppression and interference reduction, ensuring clean data transmission.
With a high maximum operating temperature, this filter can withstand elevated temperatures without compromising performance.
The low minimum operating temperature ensures that this filter is suitable for use in cold environments without loss of functionality.
The high output impedance helps in reducing noise and interference, making this filter ideal for maintaining signal integrity.
Data Line Filters BK2125LM252-T attributes and parameters. Explore more Data Line Filters devices from Taiyo Yuden
Case Code:
Construction:
Maximum DC Resistance:
Filter Type:
Maximum Frequency:
Minimum Frequency:
Height:
Length:
Material:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Rated Voltage:
Sub-Category:
Width (mm):
BK2125LM252-T Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Obsolescence/ EOL - Mult Series 25/Feb/2021
Taiyo Yuden Co., Ltd. engages in manufacture and sale of electronic components. Its products include ceramic capacitors, inductors, noise suppression components, multilayer ceramic devices, chip antennas, and wireless modules. The company was founded by Hikohachi Sato on March 23, 1950 and is headquartered in Tokyo, Japan.
2N2222A
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Zetex Plc
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
EU2B-YS3203F
Idec
ROTARY SWITCH;
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
1N4148
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
MMBT3904LT1G
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
BAV99-7-F
Multicomp Pro
Panjit International
Weitronic Enterprise
2N7002
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
SMMBT3904LT1G
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
Frontier Electronics
LM317T
STMicroelectronics
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
ABS06-32.768KHZ-T
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
Good-ark Electronics
YFF31HC2A105MT000N
TDK
YFF31HC2A105MT000N by TDK is a FEED THROUGH CAPACITOR with 100 V rated voltage, 40 dB max insertion loss, and 6 A rated current. Ideal for data line filtering applications due to its compact dimensions of L3.2XB1.6XH1.3 (mm) and surface mounting type.
ECLAMP2422N.TCT
Semtech
Semtech's ECLAMP2422N.TCT is a 5V data line filter with 2 functions and 6 terminals. It operates b/w -40°C to 85°C, offering 0.003uH inductance and 100uF capacitance. Ideal for IEC-approved applications requiring surface mount filters with dimensions of L1.45xB1.0xH0.58mm.
BKP1005HS121-TV
Taiyo Yuden
Taiyo Yuden's BKP1005HS121-TV is a FERRITE CHIP filter with 2 terminals, rated for 1A current. With dimensions of L1.0xB0.5xH0.5 (mm), it offers an output impedance of 120 ohm and max DC resistance of 0.14 ohm. Ideal for data line filtering applications, this surface mount device operates b/w -55 to 85 °C temperatures.
54-844-001
Api Technologies
54-844-001 by Api Technologies is a UL/CSA approved data line filter with a rated voltage of 600V. Featuring a feed through capacitor, it offers max insertion loss of 50dB and capacitance of 4700uF. Ideal for panel mounting applications, this filter operates at temperatures up to 125°C.
74279215
Wuerth Elektronik & Kg
Wurth Elektronik 74279215 is a multi-layer FERRITE CHIP filter with dimensions L3.2XB1.6XH1.1 (mm). It has a max operating temperature of 125°C and min frequency of 100 MHz, suitable for data line filtering applications due to its 80 OHM output impedance and surface mounting type.
744822222
Wurth Elektronik 744822222 is a UL-approved data line filter with 2 functions, rated voltage of 250V, and inductance of 2200uH. It operates b/w -40 to 125 °C and has a max DC resistance of 0.07 ohm. Ideal for applications requiring noise suppression in data lines.
74279273
Wurth Elektronik 74279273 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, with dimensions of L1.0XB0.5XH0.5 (mm). Featuring a max frequency of 600 MHz and rated current of 2A, it offers an output impedance of 20 OHM.
BLM21PG600SN1L
Murata Manufacturing
Murata Manufacturing's BLM21PG600SN1L is a FERRITE CHIP filter with 2 terminals, rated for 3A current. With dimensions of L2xB1.25xH0.85 (mm), it offers an output impedance of 60 ohm and max DC resistance of 0.025 ohm. Ideal for data line filtering applications, it operates b/w -55°C to 125°C temperatures in surface mount configurations.
BKP2125HS600-TV
BKP2125HS600-TV by Taiyo Yuden is a FERRITE CHIP data line filter with 2 terminals, rated for 3A current. It offers a max DC resistance of 0.025 ohm and an output impedance of 60 ohm. Ideal for surface mount applications in electronics, it operates b/w -55 to 85 °C temperatures.
NFE31PT152Z1E9L
Murata Manufacturing's NFE31PT152Z1E9L is a 3-terminal data line filter with 1000 Mohm insulation resistance and 25V rated voltage. With a capacitance of 1500uF, it operates b/w -40 to 85 °C, making it ideal for surface mount applications requiring up to 6A current.
ACH4518-102-TD01
TDK ACH4518-102-TD01 is a FERRITE CHIP filter with 25 dB attenuation at 150 MHz. It has 1000 Mohm insulation resistance, rated for 50 V and 2 A current. Ideal for data line filtering in surface mount applications due to its compact L4.5XB1.8XH3.2 mm dimensions and -25 to 85 °C operating temperature range.
PA4339.102NLT
Pulse Electronics
PA4339.102NLT by Pulse Electronics is a Data Line Filter with 2 functions, AEC-Q200 screening level, and 80V rated voltage. It has an inductance of 8uH and operates b/w -40°C to 125°C. Ideal for applications requiring surface mount filters with a max current rating of 3A.
ILHB0603RK600V
Vishay Intertechnology
Vishay Intertechnology's ILHB0603RK600V is a FERRITE CHIP filter with 2 terminals, 60 OHM output impedance, and 2A rated current. Operating b/w -55°C to 125°C, it has a max DC resistance of 0.1 ohm. Ideal for data line filtering in compact surface mount applications.
MPZ1608S600ATAH0
TDK's MPZ1608S600ATAH0 is a 0603 chip bead data line filter with FERRITE CHIP technology. It offers a max operating temperature of 125°C, DC resistance of 0.02 ohm, and output impedance of 60 OHM. Ideal for applications requiring noise suppression in circuits up to 100 MHz frequency range.
HI1206T161R-10
Laird Technologies
HI1206T161R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, FERRITE CHIP type, and matte tin finish. With dimensions of L3.2XB1.6XH1.1 (mm), it operates b/w -40 to 125 °C and has a max frequency of 1000 MHz. Ideal for applications requiring impedance of 160 OHM and rated current of 6 A in surface mount configurations.
HI0805R800R-10
Steward
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .01 ohm; Maximum Frequency: 1000 MHz; Material: Ferrite; Rated Current: 5 A;
BLM18KG101TN1D
Murata Manufacturing's BLM18KG101TN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.6mm, it offers a max DC resistance of 0.03 ohm and output impedance of 100 ohm at frequencies ranging from 100 MHz. Ideal for surface mount applications requiring a rated current of 3A in filtering electronic signals.
742792064
Wurth Elektronik 742792064 is a FERRITE CHIP Data Line Filter with 2 terminals, rated at 0.3A current. It operates b/w -55 to 125 °C and has a max DC resistance of 0.2 ohm. Ideal for applications requiring a compact surface mount filter with 75 OHM output impedance.
4400-099LF
Tusonix
FEED THROUGH CAPACITOR; Rated Current: 10 A; Capacitance: 50000 uF; Rated Voltage: 50 V; Terminal Finish: Silver (Ag); Maximum Insertion Loss: 70 dB;
MMZ1608A252BTD25
TDK's MMZ1608A252BTD25 is a chip bead data line filter with AEC-Q200 screening. Featuring FERRITE CHIP construction, it has 2 terminals and operates b/w -55 to 125 °C. With dimensions of L1.6xB0.8xH0.8 (mm), it offers an output impedance of 2500 OHM and rated current of 0.2 A, making it ideal for automotive applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BK2125LM182-TV
BK2125LM182-TV by Taiyo Yuden is a FERRITE CHIP filter with 2 terminals, rated for 0.3A current. With dimensions of L2.0XB1.25XH1.25 (mm), it has an output impedance of 1800 OHM and max DC resistance of 0.45 ohm. Ideal for data line filtering applications due to its compact size and surface mounting type.
BK2125HS470-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .05 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 1 A;
BK2125HS470-TV
Taiyo Yuden's BK2125HS470-TV is a FERRITE CHIP filter with 2 terminals, rated for 1A current. With dimensions of L2.0xB1.25xH0.85 (mm), it offers 47 OHM output impedance and operates b/w -55 to 125 °C. Ideal for data line filtering in surface mount applications.
BK2125HS102-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .4 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .3 A;
BK2125HM102-T
BK2125HM102-T by Taiyo Yuden is a chip bead data line filter with 400V rated voltage, -55 to 125°C operating temperature range, and 1000 ohm output impedance. Ideal for surface mount applications in electronic devices requiring noise suppression at frequencies up to 100MHz.
BK2125HS102-TV
FERRITE CHIP; Maximum DC Resistance: .4 ohm; Rated Current: .3 A; No. of Terminals: 2; No. of Functions: 1; Width (mm): 1.25;
BK2125HM601-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .25 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .5 A;
BK2125LL121-TV
FERRITE CHIP; Maximum DC Resistance: .3 ohm; Rated Current: .4 A; No. of Terminals: 2; Maximum Operating Temperature: 125 Cel; Width (mm): 1.25;
BK2125LM252-TV
FERRITE CHIP; Maximum DC Resistance: .75 ohm; Rated Current: .2 A; Maximum Operating Temperature: 125 Cel; Mounting Type: SURFACE MOUNT; Width (mm): 1.25;
BK2125HS101-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .1 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .9 A;
BK2125LM182-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .45 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .3 A;
BK2125HS101-TV
FERRITE CHIP; Maximum DC Resistance: .1 ohm; Rated Current: .9 A; Maximum Operating Temperature: 125 Cel; Output Impedance (ohm): 100 OHM; No. of Terminals: 2;
BK2125HS601-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .3 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .5 A;
BK2125HS601-TV
FERRITE CHIP; Maximum DC Resistance: .3 ohm; Rated Current: .5 A; Length: 2 mm; Height: .85 mm; Maximum Operating Temperature: 125 Cel;
BK2125HM102-TV
FERRITE CHIP; Maximum DC Resistance: .35 ohm; Rated Current: .4 A; Packing Method: TAPE; Minimum Operating Temperature: -55 Cel; Length: 2 mm;
BK2125HS121-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .15 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .8 A;
BK2125HS220-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .05 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 1.2 A;
BK2125HM471-T
BK2125HS241-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .2 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .6 A;
BK2125LM252
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .75 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .2 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved