Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VND5E160ASOTR-E by STMicroelectronics is a 16-terminal peripheral driver with power supplies of 8-28V. It features a small outline package, gull wing terminals, and AEC-Q100 screening level. Ideal for applications requiring buffer or inverter-based interface ICs in automotive electronics.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Anansix
Digiode
Microchip USA
$4.877
IDEA Electronic Components Group
$7.699
$6.929
MKK Technologies
$14.477
DigiPath Technology Company
Ampacity Inc.
$16.500
AZTECH Wire
$17.360
Kepictronics
Parana Technologies
$9.205
Corphita
The use of plastic/epoxy material makes the product lightweight and durable, ideal for applications where weight is a concern.
Surface mount capability provides easy and efficient installation on circuit boards, saving time and effort during assembly.
AEC-Q100 screening ensures the product meets automotive-grade quality standards, making it reliable and suitable for automotive applications.
The rectangular package shape allows for efficient use of space on the circuit board, making it suitable for compact designs.
Support for a wide range of power supply voltages (8V to 28V) offers flexibility in different operating environments and applications.
The large number of terminals enables connectivity to multiple devices or components, increasing the versatility and functionality of the product.
The small outline package style saves space on the circuit board, making it ideal for applications with limited space constraints.
Dual terminal position allows for increased connection options and flexibility in circuit board layout, enhancing overall design possibilities.
Gull wing terminal form provides secure and reliable connections, reducing the risk of loose connections or signal interruptions.
The small terminal pitch of 1.27mm allows for high-density mounting, enabling more components to be placed on the circuit board for enhanced functionality.
The 2-bit driver configuration offers simple logic operations and signal inversion capabilities, making it suitable for basic peripheral driving applications.
The buffer or inverter-based peripheral driver interface IC type provides versatility in signal management and control, allowing for compatibility with different communication protocols and devices.
Peripheral Drivers VND5E160ASOTR-E attributes and parameters. Explore more Peripheral Drivers devices from STMicroelectronics
Driver No. of Bits:
Interface IC Type:
JESD-30 Code:
No. of Terminals:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Screening Level:
Sub-Category:
Surface Mount:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
VND5E160ASOTR-E Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Mult Devices Testing 10/May/2018
PCN Packaging - Box Label Chg 28/Jul/2016 CRP/14/8400 20/Mar/2014
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
LM317T/NOPB
Texas Instruments
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
1N4148
Crimson Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Digitron Semiconductors
LL4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
INA826AIDGKR
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
Comchip Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
New Jersey Semiconductor Products
ITS716GXT
ITS716GXT by Infineon Technologies is a Peripheral Driver with 4 functions, operating at 5.5-40V. It offers built-in protections against transient, over current, and over voltage events. Ideal for applications requiring a small outline package and sink output current flow direction.
FSFR2100XSL
HALF BRIDGE BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 9; Package Shape: RECTANGULAR; No. of Functions: 1; Terminal Finish: MATTE TIN;
IRS2184SPBF
IRS2184SPBF by Infineon Technologies is a peripheral driver with 8 terminals, operating voltage range of 10-20V. It offers built-in transient and under voltage protections, suitable for automotive applications due to its CMOS technology and small outline package style. With turn-on time of 0.9us and turn-off time of 0.4us, it provides source and sink output current flow direction.
NCV8401ADTRKG
NCV8401ADTRKG by Onsemi is a small outline peripheral driver with built-in protections against transient, over current, and over voltage. It has a nominal output peak current limit of 35A and turn-on time of 25us. Ideal for applications requiring buffer or inverter based interface ICs in automotive electronics due to AEC-Q101 screening level.
BM2LC105FJ-CE2
ROHM
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
VN7003ALHTR
STMicroelectronics' VN7003ALHTR is a peripheral driver with 8 terminals, AEC-Q100 screening level, and built-in protections for transient, over voltage, thermal, and under voltage. It operates at supply voltages ranging from 4V to 28V and has a turn-on time of 120us. Ideal for applications requiring buffer or inverter based peripheral drivers in automotive electronics.
BTS432E2
Siemens
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 5; Package Shape: RECTANGULAR; Nominal Output Peak Current Limit: 44 A; No. of Functions: 1;
UCC23513DWYR
UCC23513DWYR by Texas Instruments is a peripheral driver with built-in transient and under voltage protections. It operates in industrial temperature range (-40 to 115°C) and can handle a max output current of 4.5A. With Schmitt trigger input characteristics, it serves as a buffer or inverter based peripheral driver for various applications.
BTS432E2XK
BTS432E2XK by Infineon Technologies is a MOS technology peripheral driver with a max supply voltage of 42V. It offers built-in protections against transient, over current, over voltage, thermal, and under voltage conditions. This rectangular-shaped device has 5 terminals and is commonly used as a buffer or inverter-based peripheral driver with a nominal output peak current limit of 44A.
BV1HD090FJ-CE2
BV1HD090FJ-CE2 by ROHM is a Peripheral Driver with 8 terminals, AEC-Q100 screening. It has a supply voltage range of 4.5V to 36V and built-in protections for transient, over current, thermal, and under voltage. This small outline driver is ideal for automotive applications requiring buffer or inverter-based interface ICs.
MAX14913AKN+
Maxim Integrated
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 3; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260; JESD-609 Code: e3;
IPS2050HQ
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; JESD-609 Code: e4; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260; Terminal Finish: NICKEL PALLADIUM GOLD;
ULN2003D1
STMicroelectronics ULN2003D1 is a 7-bit buffer/inverter peripheral driver with max supply voltage of 3V. It features open-collector output, transient protection, and sink current flow direction. Ideal for applications requiring small outline package, such as robotics and automation systems.
SZNUD3124DMT1G
SZNUD3124DMT1G by Onsemi is a MOS technology peripheral driver with AEC-Q101 screening. It features a small outline, thin profile package style and can handle up to 200mA supply current at 28V. Ideal for applications requiring transient protection and sink output current flow direction in automotive electronics.
UDN2987A
Allegro MicroSystems
Allegro MicroSystems' UDN2987A is an 8-function peripheral driver with a max supply voltage of 35V. It offers built-in protections against transient, over current, and thermal issues. Ideal for applications requiring a true output polarity and a max output current of 0.35A.
FPF2106
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
L293DD
L293DD by STMicroelectronics is a peripheral driver with 2 functions, 20 terminals, and a max supply voltage of 36V. It features built-in thermal protection and offers true output polarity. Ideal for applications requiring source and sink current flow control in compact designs.
TBD62783APG
Toshiba
Toshiba's TBD62783APG is a Peripheral Driver with 8 functions, operating at -40 to 85°C. It has a max supply voltage of 50V and built-in transient protection. Ideal for industrial applications requiring a true output polarity and standard input characteristics.
ITS711L1FUMA1
ITS711L1FUMA1 by Infineon Technologies is a peripheral driver with built-in protections for over current, over voltage, thermal, and under voltage. It operates b/w -30 to 85 °C with a supply voltage range of 5-34 V. This small outline package IC is ideal for buffer or inverter based applications requiring source and sink output current flow control.
VNQ500PEPTR-E
STMicroelectronics' VNQ500PEPTR-E is a 4-function peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates within a supply voltage range of 5.5V to 36V and has a compact package style suitable for various applications requiring source output current flow direction.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
VND5050JTR-E
VND5050JTR-E by STMicroelectronics is a peripheral driver with 36V max supply voltage, built-in protections, and 12 terminals. It is used for buffer or inverter-based interface ICs, offering sink output current flow direction. The small outline package with low profile makes it suitable for various applications requiring reliable driving capabilities.
VND5N07TR-E
VND5N07TR-E by STMicroelectronics is a small outline peripheral driver with built-in protections for transient, over current, and over voltage. It operates at 5V nominal voltage, has a turn-on time of 0.25us, and can handle output peak current limit of 5A. Ideal for applications requiring sink output current flow direction in compact spaces.
VND5050AJTR-E
VND5050AJTR-E by STMicroelectronics is a peripheral driver with 36V max supply voltage, built-in protections, and 12 terminals. It is used as a buffer or inverter-based peripheral driver for various applications requiring source output current flow direction. The small outline package style with low profile makes it suitable for compact designs.
VND5N07-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Code: TO-252; Package Shape: RECTANGULAR; Output Current Flow Direction: SINK;
VND5160JTR-E
VND5160JTR-E by STMicroelectronics is a Peripheral Driver with 2 functions, operating at 4.5-36 V. It offers built-in protections against transient, over current, and over voltage. This CMOS technology driver has a turn-on time of 10 us and is ideal for BUFFER OR INVERTER BASED applications.
VND5T016ASPTR-E
VND5T016ASPTR-E by STMicroelectronics is a peripheral driver with 16 terminals, operating voltage range of 8-36 V. AEC-Q100 compliant, it offers built-in protections for transient, over/under voltage & thermal issues. Ideal for automotive applications due to its small outline package and sink output current flow direction.
VND5050J-E
VND5050J-E by STMicroelectronics is a peripheral driver with 36V max supply voltage, built-in protections, and 12 terminals. It is used as a buffer or inverter-based peripheral driver for applications requiring sink output current flow direction. The package style is small outline with low profile and matte tin terminal finish.
VND5050AJ-E
VND5050AJ-E by STMicroelectronics is a peripheral driver with 12 terminals, operating voltage range of 4.5-36 V, and built-in protections against various faults. It features a small outline package style suitable for compact designs. Ideal for applications requiring source output current flow direction and interface IC type as buffer or inverter based peripheral driver.
VND5025AKTR-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: HSSOP; Package Shape: RECTANGULAR; Package Equivalence Code: SOP24,.4,32;
VND5050AK-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: HSSOP; Package Shape: RECTANGULAR; Built-in Protections: TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE;
VND5160AJTR-E
VND5160AJTR-E by STMicroelectronics is a Peripheral Driver with 36V max supply voltage, 4.5V min supply voltage, and 13V nominal voltage. It features built-in protections for transient, over current, over voltage, thermal, and under voltage applications in various electronic systems. This CMOS technology driver has a turn-on time of 10us and turn-off time of 15us suitable for BUFFER OR INVERTER BASED PERIPHERAL DRIVER interface IC types.
VND5160J-E
VND5160J-E by STMicroelectronics is a peripheral driver with a max supply voltage of 36V. It has built-in protections for transient, over current, over voltage, thermal, and under voltage conditions. This compact CMOS technology driver is suitable for applications requiring buffer or inverter based peripheral drivers.
VND5T050AKTR-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: HSSOP; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
VND5E160AJTR-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 12; Package Code: HLSSOP; Package Shape: RECTANGULAR; Maximum Supply Voltage: 36 V;
VND5050AKTR-E
VND5050AKTR-E by STMicroelectronics is a 24-terminal peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates on power supplies ranging from 8V to 36V and has a max supply voltage of 36V. This rectangular package with gull wing terminals is ideal for buffer or inverter-based interface IC applications.
VND5T100AJTR-E
VND5T100AJTR-E by STMicroelectronics is a peripheral driver with 36V max supply voltage, AEC-Q100 screening level, and built-in protections. It is used for buffer or inverter based applications requiring a nominal output peak current limit of 22A.
VND5050K-E
VND5050K-E by STMicroelectronics is a 24-terminal peripheral driver with built-in protections for transient, over current, thermal, and under voltage. It operates on power supplies ranging from 8V to 36V and has a max supply voltage of 36V. This rectangular package with gull wing terminals is ideal for buffer or inverter-based interface IC applications.
VND5050KTR-E
VND5050KTR-E by STMicroelectronics is a peripheral driver with built-in protections for transient, over current, thermal, and under voltage. It operates within a supply voltage range of 4.5V to 36V and has 24 terminals in a small outline package style. Ideal for applications requiring buffer or inverter based peripheral drivers with sink output current flow direction.
VND5012AKTR-E
VND5012AKTR-E by STMicroelectronics is a peripheral driver with 2 functions. It has a max supply voltage of 36V and operates on power supplies ranging from 8V to 36V. This IC type is commonly used as a buffer or inverter based peripheral driver for various applications.
VND5T100LAJTR-E
VND5T100LAJTR-E by STMicroelectronics is a peripheral driver with a max supply voltage of 36V. It has built-in protections for transient, over current, over voltage, thermal, and under voltage. This driver is commonly used in automotive applications due to its AEC-Q100 screening level.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved