Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VND5E025AYTR-E by STMicroelectronics is a 36-terminal peripheral driver with power supplies of 8/28V. It features a small outline package shape, gull wing terminals, and 0.5mm terminal pitch. Ideal for buffer or inverter-based interface IC applications requiring dual terminal position.
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Cyclops Electronics Ltd
Anansix
Digiode
IDEA Electronic Components Group
$9.562
$8.606
Microchip USA
$14.877
MKK Technologies
$17.982
DigiPath Technology Company
Ampacity Inc.
$18.500
AZTECH Wire
$19.550
Component Stockers USA
$35.190
Authorized Procurement Solutions
A-Z Elektronik GmbH
Corphita
Kepictronics
Parana Technologies
$11.433
Plastic and epoxy materials provide durability and protection for the peripheral driver, ensuring long-term reliability.
The ability for surface mounting makes installation and integration into electronic devices convenient and space-saving.
Rectangular shape allows for easy placement and alignment within electronic circuit designs.
Support for a wide range of power supplies enables flexibility in compatibility with various electronic devices.
Having 36 terminals allows for multiple connections and interfaces, expanding the functionality of the peripheral driver.
Small outline and shrink pitch package style offers a compact form factor, ideal for space-constrained environments.
Dual terminal position provides redundancy and improves connectivity for enhanced performance and reliability.
Gull wing terminal form ensures secure soldering connections and mechanical strength for stable operation.
A terminal pitch of 0.5 mm enables high-density integration and precise signal routing for optimal performance.
Support for 2 bits allows for versatile data processing and signal manipulation capabilities in peripheral control functions.
Buffer or inverter based peripheral driver offers versatile interface options for connecting and controlling peripheral devices effectively.
Peripheral Drivers VND5E025AYTR-E attributes and parameters. Explore more Peripheral Drivers devices from STMicroelectronics
Driver No. of Bits:
Interface IC Type:
JESD-30 Code:
No. of Terminals:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Sub-Category:
Surface Mount:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
VND5E025AYTR-E Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Mult Dev Assembly Chg 18/Oct/2019
PCN Packaging - Material Barrier Bag 17/Dec/2020
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
LL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Comchip Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
FDV303N
Onsemi
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
Secos
1N4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
SMBJ18CA
Yageo
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Bharat Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
261
Deltrol Controls
Other Relays;
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Good-ark Electronics
MBRA160T3G
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
B340A-13-F
Diodes Incorporated
B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2065B
Allegro MicroSystems
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
TPS22925CYPHR
TPS22925CYPHR by Texas Instruments is a peripheral driver with 6 terminals, operating voltage range of 0.65V to 3.6V, and built-in transient protection. It features a compact rectangular package style with very thin profile and fine pitch, suitable for industrial applications requiring source and sink current flow control.
LM3526M-H/NOPB
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
VN920SO
STMicroelectronics
STMicroelectronics' VN920SO is a MOS technology-based peripheral driver with 16 terminals. It offers built-in protections for transient, over current, and over voltage scenarios. With a max output current of 10A and nominal output peak current limit of 45A, it's ideal for applications requiring sink flow direction like buffer or inverter based interface ICs.
TPS4H160AQPWPRQ1
TPS4H160AQPWPRQ1 by Texas Instruments is a Peripheral Driver with 4 functions, operating at -40 to 125 °C. It offers built-in protections for transient, over current, thermal, and under voltage issues. Ideal for automotive applications due to AEC-Q100 screening level and high side driver feature.
TPS25221DBVR
TPS25221DBVR by Texas Instruments is a small outline, low profile peripheral driver with thermal protection. It operates in automotive temperature grades from -40 to 125°C. With turn-on time of 3000us and turn-off time of 700us, it's ideal for buffer or inverter based applications.
MAX14900EAGM+CKT
Analog Devices
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Peak Reflow Temperature (C): 260; Terminal Finish: Matte Tin (Sn) - annealed; Moisture Sensitivity Level (MSL): 3; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3;
BTS428L2ATMA1
BTS428L2ATMA1 by Infineon is a 4-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates at a nominal voltage of 12V with a max of 41V. With a turn-on/off time of 200us, it's ideal for applications requiring a sink output current flow direction in small outline packages.
BTS4175SGAXUMA1
BTS4175SGAXUMA1 by Infineon is a peripheral driver with 8 terminals, offering built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 6V to 52V and has a turn-on time of 180 us. Ideal for applications requiring a small outline package style and sink output current flow direction.
TPIC6B595DWR
TPIC6B595DWR by Texas Instruments is a register-based peripheral driver with 8 channels and open-drain output. It operates b/w -40 to 125 °C, with a supply voltage range of 4.5-5.5 V. Ideal for automotive applications due to built-in transient protection and small outline package style.
VNS1NV04DPTR-E
STMicroelectronics VNS1NV04DPTR-E is an 8-terminal peripheral driver with GULL WING terminals. It features a peak reflow temperature of 260°C and sink output current flow direction. Ideal for applications requiring BUFFER OR INVERTER BASED PERIPHERAL DRIVER interface IC type in a SMALL OUTLINE package.
DML3006LFDS-7
DML3006LFDS-7 by Diodes Inc. is a Peripheral Driver with 8 terminals, operating voltage range of 0.5V to 13.5V, and built-in protections for transient, over current, thermal & under voltage issues. It has a small outline package style suitable for industrial applications requiring a buffer or inverter based peripheral driver with sink output current flow direction.
MIC2076-1YM
Micrel
FPF2102
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
VN820SP
VN820SP by STMicroelectronics is a MOS technology-based peripheral driver with built-in protections against transient, over current, over voltage, thermal, and under voltage. It operates within a power supply range of 8-36V and can handle a max output current of 9A. This small outline package is ideal for applications requiring source flow direction in automotive systems.
BTS70041EPPXUMA1
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Moisture Sensitivity Level (MSL): 2A; Terminal Finish: TIN; JESD-609 Code: e3;
UCC23513DWYR
UCC23513DWYR by Texas Instruments is a peripheral driver with built-in transient and under voltage protections. It operates in industrial temperature range (-40 to 115°C) and can handle a max output current of 4.5A. With Schmitt trigger input characteristics, it serves as a buffer or inverter based peripheral driver for various applications.
TPIC6B595DWG4
TPIC6B595DWG4 by Texas Instruments is a register-based peripheral driver with 8 bits. It has a max supply voltage of 5.5V and can handle a max output current of 0.15A. Ideal for automotive applications due to its built-in transient protections and small outline package style.
VN5E160MSTR-E
STMicroelectronics' VN5E160MSTR-E is a peripheral driver with 8-28V power supplies, 1A max output current, and built-in protections. Ideal for applications requiring buffer or inverter-based interface ICs, it offers sink output current flow direction and operates at supply voltages ranging from 4.5V to 28V.
E-L6202
STMicroelectronics E-L6202 is a full bridge peripheral driver with 18 terminals. It operates at a nominal voltage of 36V and supports a max supply voltage of 48V. The device features built-in thermal protection and is commonly used in applications requiring source and sink output current flow control.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
VND5050JTR-E
VND5050JTR-E by STMicroelectronics is a peripheral driver with 36V max supply voltage, built-in protections, and 12 terminals. It is used for buffer or inverter-based interface ICs, offering sink output current flow direction. The small outline package with low profile makes it suitable for various applications requiring reliable driving capabilities.
VND5N07TR-E
VND5N07TR-E by STMicroelectronics is a small outline peripheral driver with built-in protections for transient, over current, and over voltage. It operates at 5V nominal voltage, has a turn-on time of 0.25us, and can handle output peak current limit of 5A. Ideal for applications requiring sink output current flow direction in compact spaces.
VND5050AJTR-E
VND5050AJTR-E by STMicroelectronics is a peripheral driver with 36V max supply voltage, built-in protections, and 12 terminals. It is used as a buffer or inverter-based peripheral driver for various applications requiring source output current flow direction. The small outline package style with low profile makes it suitable for compact designs.
VND5N07-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Code: TO-252; Package Shape: RECTANGULAR; Output Current Flow Direction: SINK;
VND5160JTR-E
VND5160JTR-E by STMicroelectronics is a Peripheral Driver with 2 functions, operating at 4.5-36 V. It offers built-in protections against transient, over current, and over voltage. This CMOS technology driver has a turn-on time of 10 us and is ideal for BUFFER OR INVERTER BASED applications.
VND5T016ASPTR-E
VND5T016ASPTR-E by STMicroelectronics is a peripheral driver with 16 terminals, operating voltage range of 8-36 V. AEC-Q100 compliant, it offers built-in protections for transient, over/under voltage & thermal issues. Ideal for automotive applications due to its small outline package and sink output current flow direction.
VND5050J-E
VND5050J-E by STMicroelectronics is a peripheral driver with 36V max supply voltage, built-in protections, and 12 terminals. It is used as a buffer or inverter-based peripheral driver for applications requiring sink output current flow direction. The package style is small outline with low profile and matte tin terminal finish.
VND5050AJ-E
VND5050AJ-E by STMicroelectronics is a peripheral driver with 12 terminals, operating voltage range of 4.5-36 V, and built-in protections against various faults. It features a small outline package style suitable for compact designs. Ideal for applications requiring source output current flow direction and interface IC type as buffer or inverter based peripheral driver.
VND5025AKTR-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: HSSOP; Package Shape: RECTANGULAR; Package Equivalence Code: SOP24,.4,32;
VND5050AK-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: HSSOP; Package Shape: RECTANGULAR; Built-in Protections: TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE;
VND5160AJTR-E
VND5160AJTR-E by STMicroelectronics is a Peripheral Driver with 36V max supply voltage, 4.5V min supply voltage, and 13V nominal voltage. It features built-in protections for transient, over current, over voltage, thermal, and under voltage applications in various electronic systems. This CMOS technology driver has a turn-on time of 10us and turn-off time of 15us suitable for BUFFER OR INVERTER BASED PERIPHERAL DRIVER interface IC types.
VND5160J-E
VND5160J-E by STMicroelectronics is a peripheral driver with a max supply voltage of 36V. It has built-in protections for transient, over current, over voltage, thermal, and under voltage conditions. This compact CMOS technology driver is suitable for applications requiring buffer or inverter based peripheral drivers.
VND5T050AKTR-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: HSSOP; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
VND5E160AJTR-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 12; Package Code: HLSSOP; Package Shape: RECTANGULAR; Maximum Supply Voltage: 36 V;
VND5050AKTR-E
VND5050AKTR-E by STMicroelectronics is a 24-terminal peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates on power supplies ranging from 8V to 36V and has a max supply voltage of 36V. This rectangular package with gull wing terminals is ideal for buffer or inverter-based interface IC applications.
VND5T100AJTR-E
VND5T100AJTR-E by STMicroelectronics is a peripheral driver with 36V max supply voltage, AEC-Q100 screening level, and built-in protections. It is used for buffer or inverter based applications requiring a nominal output peak current limit of 22A.
VND5050K-E
VND5050K-E by STMicroelectronics is a 24-terminal peripheral driver with built-in protections for transient, over current, thermal, and under voltage. It operates on power supplies ranging from 8V to 36V and has a max supply voltage of 36V. This rectangular package with gull wing terminals is ideal for buffer or inverter-based interface IC applications.
VND5050KTR-E
VND5050KTR-E by STMicroelectronics is a peripheral driver with built-in protections for transient, over current, thermal, and under voltage. It operates within a supply voltage range of 4.5V to 36V and has 24 terminals in a small outline package style. Ideal for applications requiring buffer or inverter based peripheral drivers with sink output current flow direction.
VND5012AKTR-E
VND5012AKTR-E by STMicroelectronics is a peripheral driver with 2 functions. It has a max supply voltage of 36V and operates on power supplies ranging from 8V to 36V. This IC type is commonly used as a buffer or inverter based peripheral driver for various applications.
VND5T100LAJTR-E
VND5T100LAJTR-E by STMicroelectronics is a peripheral driver with a max supply voltage of 36V. It has built-in protections for transient, over current, over voltage, thermal, and under voltage. This driver is commonly used in automotive applications due to its AEC-Q100 screening level.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved