Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
STMicroelectronics' VN800S-E is a peripheral driver with 8-36V power supplies, built-in protections, and source output current flow. Its compact rectangular package is ideal for applications requiring transient, over current, over voltage, thermal, and under voltage protection in various electronic systems.
Median Price
-
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Quantum Digital Technology
1+ parts
100+ parts
1k+ parts
10k+ parts
Sensible Micro Corp
Vyrian
Chip Stock
Digiode
Anansix
Nova Conductors
ComSIT Distribution GmbH
IDEA Electronic Components Group
$6.425
$5.783
Aztec Data Supply Inc.
$6.610
Corohmni
$9.220
AZTECH Wire
$9.656
MKK Technologies
$12.082
DigiPath Technology Company
Microchip USA
$18.015
Semicontronic
$29.500
$28.762
$28.615
Ampacity Inc.
$41.500
Component Stockers USA
Kepictronics
Argo Parts USA
Continental Prestige Electronics
Corphita
Advanced Electronics
Parana Technologies
$7.682
Bastille Electronics
Provides durability and protection for the internal components, ensuring a longer lifespan for the peripheral driver.
Allows for easy installation onto circuit boards, reducing manufacturing time and costs.
Can handle high voltage inputs, making it suitable for a wide range of applications.
Ensures the safety of connected devices and the peripheral driver itself by preventing damage from various electrical issues.
Supports a wide range of power supplies, giving flexibility in design and integration with different systems.
Provides multiple connection points for interfacing with other components, increasing versatility.
Compact design saves space on the PCB, allowing for more components to be placed in a limited area.
Can operate at low voltage levels, ideal for energy-efficient applications.
Provides corrosion resistance and good conductivity for reliable connections.
Allows for flexibility in board layout and component placement.
Low profile design reduces overall size of the product, suitable for applications with space constraints.
Compact width allows for easy integration into different circuit designs.
Compact length saves space on the PCB, suitable for designs with limited board real estate.
Provides secure and reliable connections to the circuit board, reducing the risk of disconnection.
Ideal voltage level for stable and efficient operation in multiple applications.
Standard pitch size for easy integration with common connector types.
Compatible with a wide range of interface requirements, providing versatility in system design.
Ensures the correct flow of current for connected devices, preventing damage and errors in operation.
Peripheral Drivers VN800S-E attributes and parameters. Explore more Peripheral Drivers devices from STMicroelectronics
Built-in Protections:
Driver No. of Bits:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Output Current Flow Direction:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
VN800S-E Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138BKW,115
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
SMBJ18CA
Daco Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
1N4148
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
LM317T/NOPB
Texas Instruments
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
2N7002
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
AUIR2085STR
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MIC2545A-2YM
Micrel
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
IRS21867STRPBF
IRS21867STRPBF by Infineon is a CMOS peripheral driver with 8 terminals. It operates b/w -40 to 125 °C and supports a supply voltage range of 10-20 V. Ideal for automotive applications, it offers built-in protections against transient, over current, and under voltage conditions.
ISP772TXT
Infineon Technologies' ISP772TXT is a Peripheral Driver with built-in protections for transient, over current, and over voltage. It operates b/w -30 to 85 °C with a supply voltage range of 5-34 V. Ideal for applications requiring a small outline package style and sink output current flow direction.
TPS4H000AQPWPRQ1
TPS4H000AQPWPRQ1 by Texas Instruments is a Peripheral Driver with 4 functions, operating at -40 to 125 °C. It has built-in protections for transient, over current, thermal & under voltage. Ideal for automotive applications due to AEC-Q100 screening & high side driver feature.
TPS272C45ARHFR
TPS272C45ARHFR by Texas Instruments is a peripheral driver with 2 functions, operating at 6-36V. It offers built-in protections against transient, over current, and over voltage. Ideal for automotive applications due to its high side driver and low turn-on/off times.
TPS27081ADDCR
TPS27081ADDCR by Texas Instruments is a peripheral driver with a max supply voltage of 8V. It has built-in transient protection and operates in an industrial temperature range. This IC type is commonly used as a buffer or inverter based peripheral driver for various applications.
HCPL-316J#500
Broadcom
HCPL-316J#500 by Broadcom is a Peripheral Driver with 16 terminals, operating voltage range of 4.5V to 5.5V, and built-in protections against over/under voltage. It features a small outline package style suitable for industrial applications requiring a nominal output peak current limit of 2.5A and sink flow direction.
ULN-2801A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
VND5T016ASPTR-E
STMicroelectronics
VND5T016ASPTR-E by STMicroelectronics is a peripheral driver with 16 terminals, operating voltage range of 8-36 V. AEC-Q100 compliant, it offers built-in protections for transient, over/under voltage & thermal issues. Ideal for automotive applications due to its small outline package and sink output current flow direction.
BTS723GWXT
BTS723GWXT by Infineon Technologies is a MOS technology peripheral driver with 14 terminals and built-in protections against transient, over current, over voltage, thermal, and under voltage. It operates at supply voltages ranging from 7V to 58V and has a nominal output peak current limit of 9A. Ideal for applications requiring buffer or inverter based peripheral drivers with sink output current flow direction.
BTS452RXT
BTS452RXT by Infineon Technologies is a peripheral driver with a max supply voltage of 52V. It offers built-in protections for transient, over current, over voltage, thermal, and under voltage conditions. This small outline package is suitable for applications requiring buffer or inverter based interface ICs with source and sink output current flow direction.
LMD18200T/LF14
LMD18200T/LF14 by Texas Instruments is a peripheral driver with a max supply voltage of 55V and built-in protections for transient, thermal, and under voltage. It has a max output current of 6A and operates in automotive temperature grades. This HB-based peripheral driver with PWM is ideal for applications requiring high current sourcing and sinking capabilities.
IMP803LG/T
Imp
IMP803LG/T by Imp is a CMOS peripheral driver with 8 terminals, operating from -40 to 85 °C. It has a supply voltage range of 2-6.5 V and supports half bridge based applications with source/sink current flow direction. Ideal for industrial use due to its small outline package style and dual terminal position.
UDN2987A-6-T
Allegro MicroSystems
Allegro MicroSystems' UDN2987A-6-T is a 20-terminal peripheral driver with built-in transient, over current, and thermal protections. Operating at 4.75-35 V, it offers a max output current of 0.35 A and turn-on/off time of 1 us. Ideal for applications requiring sink flow direction in buffer or inverter-based interface ICs.
BSP772TXUMA1
BSP772TXUMA1 by Infineon: Peripheral driver with 8 terminals, MOS tech, 34V max supply voltage. Ideal for industrial applications requiring transient, over/under voltage protection. Small outline package, sink output current flow direction, and 17A nominal output peak current limit.
MAX845ESA+T
Analog Devices
MAX845ESA+T by Analog Devices is a small outline peripheral driver with 8 terminals. It operates b/w -40 to 85°C, with supply voltage range of 4.5-5.5V. Ideal for industrial applications requiring buffer or inverter based interface ICs.
BTS500601TEAAUMA2
BTS500601TEAAUMA2 by Infineon Technologies is a peripheral driver with a max supply voltage of 5V. It offers built-in protections against over current, over voltage, and under voltage. This small outline package is commonly used as a buffer or inverter based peripheral driver for various applications.
ISO8200BTR
ISO8200BTR by STMicroelectronics is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -40 to 125 °C and has a max supply voltage of 36 V. This automotive-grade IC features a turn-on time of 22 us and nominal output peak current limit of 1.1 A, making it ideal for buffer or inverter-based applications in the automotive industry.
VND5E160JTR-E
VND5E160JTR-E by STMicroelectronics is a peripheral driver with a small outline package shape and dual terminal position. It operates at power supplies of 8/28V and has a max time at peak reflow temperature of 30s. This CMOS technology-based IC is commonly used as a half bridge-based peripheral driver for sink output current flow direction applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
VN800PSTR-E
STMicroelectronics' VN800PSTR-E is a peripheral driver with 8-36V power supplies, 0.7A max output current, and built-in protections. Ideal for automotive applications due to AEC-Q100 screening level and sink output current flow direction. Package style: small outline, terminal pitch: 1.27mm, and moisture sensitivity level of 3.
VN808-E
VN808-E by STMicroelectronics is a peripheral driver with 8 functions and a max output current of 0.5A. It has built-in protections for transient, over current, thermal, and under voltage conditions. This IC is commonly used as a buffer or inverter based peripheral driver in various applications.
VN808CM-E
VN808CM-E by STMicroelectronics is a peripheral driver with 8 functions, operating at 10.5-32V, and offering built-in protections against various faults. With a max output current of 0.7A, it is suitable for automotive applications requiring a reliable buffer or inverter-based interface IC type. This compact driver has a small outline package style and can withstand temperatures ranging from -40 to 125°C.
VN808TR-E
STMicroelectronics' VN808TR-E is a peripheral driver with 8 functions, max supply voltage of 45V, and built-in protections. It is used as a buffer or inverter based peripheral driver for applications requiring a max output current of 0.5A and turn-on time of 100us.
VN808CMTR-E
STMicroelectronics' VN808CMTR-E is a peripheral driver with 8 functions, operating at supply voltages b/w 10.5V to 32V. With built-in protections against transient, over current, and over voltage, it's ideal for automotive applications requiring a max output current of 0.7A. The small outline package style with gull wing terminals makes it suitable for surface mount installations in tight spaces.
VN808CMTR-32-E
STMicroelectronics' VN808CMTR-32-E is a peripheral driver with 8 functions, operating at supply voltages of 10.5V to 32V. It offers built-in thermal and under voltage protections, suitable for automotive applications with a temperature range from -40°C to 125°C. The driver has a small outline package style, source output current flow direction, and turn-on/off times of 100us and 150us respectively.
VN808-32-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 36; Package Code: HSSOP; Package Shape: RECTANGULAR;
VN808CM-32-E
VN808TR-32-E
STMicroelectronics' VN808TR-32-E is a peripheral driver with 8 functions, operating at 10.5-32V, suitable for automotive applications. It offers built-in protections against transient events, thermal issues, and under-voltage conditions. With a max output current of 0.5A and fast turn-on/off times of 100/150us, it is ideal for driving various loads in automotive systems.
VN800PS-E
VN800PS-E by STMicroelectronics is a peripheral driver with built-in protections for transient, over voltage, thermal, and under voltage. It operates at supply voltages ranging from 8V to 36V and has a max output current of 0.7A. Ideal for applications requiring buffer or inverter based peripheral drivers with sink output current flow direction.
VN800PTTR-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Shape: RECTANGULAR; Maximum Supply Voltage: 36 V; Terminal Finish: Tin (Sn);
VN800PT-E
VN800PT-E by STMicroelectronics is a peripheral driver with a max supply voltage of 36V. It offers built-in protections against transient, over current, over voltage, thermal, and under voltage conditions. This small outline package is suitable for applications requiring a buffer or inverter based peripheral driver.
VN800PT13TR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 4; Package Code: TO-263; Package Shape: RECTANGULAR;
VN800PT
VN800STR-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Position: DUAL;
VN808CM
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 36; Package Code: HSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
VN800S13TR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
VN808
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 36; Package Code: HSSOP; Package Shape: RECTANGULAR; Minimum Supply Voltage: 10.5 V;
VN80813TR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 36; Package Code: HSSOP; Package Shape: RECTANGULAR; Power Supplies (V): 10.5/32;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved