Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
STMicroelectronics' VN750-B513TR is a peripheral driver with 2A output current, 36V max supply voltage, and built-in protections. Ideal for applications requiring sink output current flow direction, such as buffer or inverter-based interface ICs.
Median Price
-
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Chip Stock
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
Anansix
Digital Electronic Gebert Verwaltungs UG
ComSIT Distribution GmbH
ComSIT USA
IDEA Electronic Components Group
$7.418
$6.676
Microchip USA
$7.622
AZTECH Wire
$10.630
MKK Technologies
$13.949
DigiPath Technology Company
Kepictronics
A-Z Elektronik GmbH
Corphita
Authorized Procurement Solutions
Parana Technologies
$8.869
iodParts Technologies Inc.
Lixinc
This material provides durability and protection for the internal components of the peripheral driver, ensuring a longer lifespan.
Allows for easy installation on circuit boards, saving time and effort during assembly.
Can handle high voltage inputs, making it suitable for a wide range of applications.
Ensures the safety of the connected devices and the peripheral driver itself by preventing damage from surges, overheating, and other potential issues.
Offers flexibility in voltage requirements, allowing compatibility with various power sources.
Simplifies the connection process and reduces the chances of wiring errors.
Capable of providing sufficient current to drive peripherals without overloading or overheating.
Can handle peak current demands for short durations, ensuring reliable performance under heavy loads.
Suitable for driving components that require current sinking, such as LEDs or relays.
Peripheral Drivers VN750-B513TR attributes and parameters. Explore more Peripheral Drivers devices from STMicroelectronics
Built-in Protections:
Driver No. of Bits:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
No. of Functions:
No. of Terminals:
Output Current Flow Direction:
Maximum Output Current:
Nominal Output Peak Current Limit:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
VN750-B513TR Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
BSS138
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
BSS138W-7-F
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
1N4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
SMBJ18CA
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
LM358M
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
FDN306P
Onsemi
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
BTS721L1XUMA1
Infineon Technologies
BTS721L1XUMA1 by Infineon is a peripheral driver with 4 functions, MOS technology, and 20 terminals. It offers built-in protections for transient, over current, over voltage, thermal, and under voltage scenarios. This small outline package is ideal for applications requiring a nominal voltage of 12V and a max output peak current limit of 9.8A.
VNB35NV04TR-E
STMicroelectronics
VNB35NV04TR-E by STMicroelectronics is a peripheral driver with built-in protections for transient, over current, over voltage, and thermal issues. It operates at a nominal voltage of 5V and has a peak reflow temperature of 260°C. This small outline heat sink package is ideal for applications requiring sink output current flow direction in a compact form factor.
L6203
STMicroelectronics L6203 is a full bridge peripheral driver with 48V max supply voltage, built-in transient and thermal protections. Ideal for applications requiring source and sink output current flow direction, it features 11 terminals in a rectangular package style with through-hole terminal form.
XLMG1210RVRT
Texas Instruments
XLMG1210RVRT by Texas Instruments is a peripheral driver with max supply voltage of 5.25V, thermal protection, and 19 terminals. Ideal for automotive applications, it has a turn-on time of 0.018us and operates b/w -40 to 125 °C.
AUIPS2041LTR
AUIPS2041LTR by Infineon is a peripheral driver with built-in protections for transient, over current, and thermal issues. It operates at supply voltages ranging from 6V to 50V and has a turn-on time of 4µs and turn-off time of 8µs. This small outline package is ideal for applications requiring source and sink output current flow direction.
ULN2003ADR2G
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Output Polarity: INVERTED;
FSFR2100
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 9; Package Code: ZIP; Package Shape: RECTANGULAR;
VN340SPTR-E
VN340SPTR-E by STMicroelectronics is a peripheral driver with 4 functions, operating at supply voltages of 10-36V. It offers built-in protections against transient, thermal, and under voltage conditions. This small outline driver has a max output current of 0.7A and is ideal for buffer or inverter-based interface IC applications.
FPF2109
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
DS2482S-100/T&R
Maxim Integrated
DS2482S-100/T&R by Maxim Integrated is a peripheral driver with 8 terminals, operating at -40 to 85°C. It has a supply voltage range of 2.9V to 5.5V and is ideal for industrial applications requiring buffer or inverter-based interface ICs in compact designs.
ULN-2004A
Sprague Electric
Sprague Electric's ULN-2004A is a 16-terminal peripheral driver with max output current of 0.35A and nominal voltage of 50V. It operates in commercial temperature range, making it ideal for various applications requiring bipolar technology and through-hole terminal form.
DRV103U/2K5
DRV103U/2K5 by Texas Instruments is a peripheral driver with a max supply voltage of 32V and built-in protections for transient, over current, and thermal issues. It operates b/w -55 to 125 °C and has a nominal output peak current limit of 3A. Ideal for military-grade applications requiring buffer or inverter based peripheral drivers.
IPS2050HQ
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; JESD-609 Code: e4; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260; Terminal Finish: NICKEL PALLADIUM GOLD;
BTS441TGNTMA1
BTS441TGNTMA1 by Infineon is a 4-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 4.75V to 43V, with a nominal output peak current limit of 21A. This small outline package IC is ideal for applications requiring sink output current flow direction and turn-on/off times of 200us/250us.
ULN-2801A
Vishay Sprague
Vishay Sprague's ULN-2801A is an 8-function peripheral driver with built-in transient protection. It operates b/w -20°C to 85°C, featuring open-collector output characteristics and a turn-on/off time of 1 us. Ideal for applications requiring sink current flow direction, this rectangular package style IC is commonly used in buffer or inverter-based interfaces.
BTS436L2GATMA1
BTS436L2GATMA1 by Infineon Technologies is a peripheral driver with a max supply voltage of 41V. It offers built-in protections against transient, over current, over voltage, and thermal issues. This MOS technology-based device has a nominal output peak current limit of 9.8A and is commonly used as a buffer or inverter based peripheral driver.
A2982SLW
Allegro MicroSystems
Allegro MicroSystems' A2982SLW is a small outline peripheral driver with 8 functions, operating at -20 to 85°C. It has a max output current of 0.35A and built-in transient protection, suitable for buffer or inverter applications requiring a supply voltage range of 5-50V.
LTC4376HDHD#PBF
LTC4376HDHD#PBF by Analog Devices is a Peripheral Driver with 16 terminals, operating voltage range of 4-40V, and built-in transient protection. It features a small outline package style suitable for automotive applications. This CMOS technology-based IC has a turn-off time of 0.5us and is ideal for buffer or inverter based peripheral driver interfaces.
TLE6240GP
TLE6240GP by Infineon Technologies is a peripheral driver with a max supply voltage of 5.5V and built-in protections for transient, over current, over voltage, and thermal issues. It is commonly used as a buffer or inverter based peripheral driver in various applications.
BTS50301EJAXUMA1
BTS50301EJAXUMA1 by Infineon is a peripheral driver with 8 terminals, offering built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 8V to 18V and has a nominal output peak current limit of 5A. Ideal for automotive applications due to AEC-Q100 screening level.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
VN750PSTR-E
STMicroelectronics' VN750PSTR-E is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates within a supply voltage range of 5.5V to 36V and can handle a max output current of 2A. Ideal for applications requiring true output polarity and source flow direction in compact designs.
VN750PTTR-E
VN750PTTR-E by STMicroelectronics is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates within a supply voltage range of 5.5V to 36V and can handle a max output current of 2A. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink output current flow direction.
VN751PT13TR
VN751PT13TR by STMicroelectronics is a peripheral driver with a max supply voltage of 36V and built-in transient protections. It operates in automotive applications, offering a nominal output peak current limit of 2.5A. With a small outline package style and gull wing terminal form, it is suitable for surface mount installations in various electronic systems.
VN750PT-E
STMicroelectronics' VN750PT-E is a 5-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates within a supply voltage range of 5.5V to 36V and can handle a max output current of 2A. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink output current flow direction.
VN751STR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
VN750PS-E
VN750PS-E by STMicroelectronics is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates within a supply voltage range of 5.5V to 36V and can handle a max output current of 2A. This small outline package is ideal for applications requiring source output current flow direction and quick turn-on/off times.
VN750B5TR-E
STMicroelectronics' VN750B5TR-E is a 5-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 8V to 36V and can handle a max output current of 2A. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink output current flow direction.
VN751PT
VN751PT by STMicroelectronics is a Peripheral Driver with 5 terminals, operating voltage range of 5.5V to 36V, and built-in transient protection. It has a small outline package style suitable for automotive applications, with a max temperature of 125°C. The device offers a nominal output peak current limit of 2.5A and operates as a buffer or inverter-based peripheral driver with source flow direction.
VN750SMPTR-E
STMicroelectronics' VN750SMPTR-E is a peripheral driver with 8-36V power supplies, 2A max output current, and built-in protections. Ideal for applications requiring source flow direction, it features a small outline package style and turn-on/off times of 40/30us.
VN750B5-E
STMicroelectronics' VN750B5-E is a 5-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 8V to 36V and has a max output current of 2A. Ideal for applications requiring sink output current flow direction in compact spaces.
VN751S
STMicroelectronics' VN751S is a peripheral driver with 8-36V power supplies, built-in transient protection, and 2.7A output current limit. Ideal for automotive applications, it operates b/w -40 to 125°C and features a small outline package with gull wing terminals.
VN750PT13TR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Code: TO-263; Package Shape: RECTANGULAR; Output Current Flow Direction: SINK;
VN750PT
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Code: TO-263; Package Shape: RECTANGULAR; Package Equivalence Code: SMSIP4/5H,.37,50TB;
VN750PEP-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 12; Package Code: HLSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
VN750
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 5; Package Code: ZIP; Package Shape: RECTANGULAR; Maximum Output Current: 2 A;
VN750SMTR-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G8;
VN750S
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Nominal Output Peak Current Limit: 9 A;
VN750-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 5; Package Code: ZIP; Package Shape: RECTANGULAR; Nominal Output Peak Current Limit: 9 A;
VN750-B5
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;
VN750PEP
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved