Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
Median Price
$2.710
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$3.660
100+ parts
$2.280
1k+ parts
$2.080
10k+ parts
$1.880
DigiKey
$3.730
$2.326
$2.186
-
Farnell
$4.538
$2.995
$2.147
Future Electronics
Arrow
$1.610
Verical
Chip1Stop
$2.050
Element14
$3.092
$2.217
Newark
$1.910
$1.830
Nova Conductors
$2.310
Digiode
$3.154
Vyrian
Chip Stock
Anansix
Cyclops Electronics Ltd
Component Sense
Ampacity Inc.
$1.370
Continental Prestige Electronics
$2.264
Argo Parts USA
Corphita
$2.988
Corohmni
$5.636
Aztec Data Supply Inc.
$7.760
IDEA Electronic Components Group
$11.525
$10.372
Microchip USA
$14.070
$13.980
$13.940
$13.900
MKK Technologies
$21.672
DigiPath Technology Company
Lixinc
Authorized Procurement Solutions
Parana Technologies
$13.780
Peripheral Drivers VN7007ALHTR attributes and parameters. Explore more Peripheral Drivers devices from STMicroelectronics
Interface IC Type:
Peak Reflow Temperature (C):
Maximum Time At Peak Reflow Temperature (s):
VN7007ALHTR Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - VN7007A/VND7012A/VNQ7040A 05/Oct/2022
PCN Packaging - Material Barrier Bag 17/Dec/2020
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
2N2222A
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
1N4148
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
LL4148
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
LIS2DH12TR
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
SS14
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Hy Electronic
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
General Semiconductor
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
Weitronic Enterprise
L293DNEE4
Texas Instruments
L293DNEE4 by Texas Instruments is a half bridge based peripheral driver with 2 functions, 16 terminals, and a max output current of 1.2A. It operates b/w -40 to +70°C and is ideal for driving inductive loads in robotics and motor control applications.
FDC6323L
Onsemi
FDC6323L by Onsemi is a small outline, low profile peripheral driver with 6 terminals and built-in transient protection. It features a max output peak current limit of 1A and operates as a buffer or inverter-based driver. Ideal for applications requiring source output current flow direction in compact spaces.
FDC6329L
FDC6329L by Onsemi is a small outline peripheral driver with 6 terminals and built-in transient protection. It has a max output peak current limit of 1.9A, operates as a buffer or inverter, and is ideal for source current flow applications. The package dimensions are 2.9mm x 1.6mm x 1.22mm, making it suitable for compact electronic designs requiring surface mount components.
LMG1020YFFT
LMG1020YFFT by Texas Instruments is a peripheral driver with 6 terminals, operating voltage range of 4.75V to 5.25V, and max output current of 7A. It features built-in thermal and under voltage protections, making it suitable for automotive applications requiring fast turn-on/off times and source/sink current flow direction control.
BSP75GTA
Diodes Incorporated
BSP75GTA by Diodes Inc. is a Peripheral Driver with 4 terminals, 32V max supply voltage, and built-in protections against over current, over voltage, and thermal issues. It has a turn-on time of 10us and nominal output peak current limit of 3A. Ideal for applications requiring buffer or inverter based peripheral drivers in compact spaces.
TPS22965QWDSGTQ1
TPS22965QWDSGTQ1 by Texas Instruments is a small outline, heat sink package with built-in transient protection. It operates b/w -40 to 125 °C and supports a supply voltage range of 2.5V to 5.5V, making it ideal for automotive applications requiring source and sink current flow control.
ADUM7234BRZ
Analog Devices
ADUM7234BRZ by Analog Devices is a half bridge based peripheral driver with 16 terminals. It operates b/w -40 to 105 °C and supports a max supply voltage of 18 V. With turn-on/off time of 0.2 us, it's ideal for industrial applications requiring source/sink output current flow control.
TPS22860DBVR
TPS22860DBVR by Texas Instruments is a small outline, low profile peripheral driver with 6 terminals. It operates in industrial temperature range (-40 to 85°C) and has turn-on/off times of 0.015/0.02 us. Ideal for applications requiring fast switching speeds and compact design.
TPS22975DSGR
TPS22975DSGR by Texas Instruments is a Peripheral Driver with 8 terminals, operating from -40 to 105 °C. It has a max supply voltage of 5.7 V and min supply voltage of 0.6 V, suitable for industrial applications requiring buffer or inverter-based peripheral drivers.
AUIR3313STRL
Infineon Technologies
AUIR3313STRL by Infineon Technologies is a peripheral driver with a max supply voltage of 32V and built-in protections for transient, over current, and thermal issues. It has a max output current of 23A and is suitable for applications requiring interface IC type buffer or inverter based peripheral drivers. The package style is small outline with heat sink/slug, making it ideal for compact designs.
ISO8200B
ISO8200B by STMicroelectronics is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -40 to 125 °C with a supply voltage range of 10.5-36 V, making it suitable for automotive applications requiring a nominal output peak current limit of 1.1 A.
ULN2004AD16-U
ULN2004AD16-U by Diodes Inc. is a peripheral driver with 7 bits, open-collector output characteristics, and a max supply voltage of 13V. It is commonly used as a buffer or inverter based peripheral driver in various applications.
FSFR2100XS
HALF BRIDGE BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 9; Package Shape: RECTANGULAR; Terminal Position: ZIG-ZAG; Package Body Material: PLASTIC/EPOXY;
VND5050AJ-E
VND5050AJ-E by STMicroelectronics is a peripheral driver with 12 terminals, operating voltage range of 4.5-36 V, and built-in protections against various faults. It features a small outline package style suitable for compact designs. Ideal for applications requiring source output current flow direction and interface IC type as buffer or inverter based peripheral driver.
MAX845ESA
MAX845ESA by Maxim Integrated is a peripheral driver with 8 terminals, operating voltage range of 4.5V to 5.5V, and industrial temperature grade. It features a small outline package style suitable for buffer or inverter-based applications. With source and sink output current flow direction, it is ideal for various industrial electronic systems.
DRV103H/2K5G3
DRV103H/2K5G3 by Texas Instruments is a peripheral driver with a max supply voltage of 32V and built-in protections for transient, over current, and thermal issues. It operates in industrial temperature grades from -40 to 85°C, making it suitable for various applications requiring a nominal output peak current limit of 3.5A. The package style is small outline with gull wing terminals, ideal for surface mount designs.
FDC6330L_NL
FDC6330L_NL by Fairchild Semiconductor is a CMOS peripheral driver with 6 terminals, 2.3A output current, and built-in transient protection. It operates in temperatures ranging from -55 to 150°C and is ideal for military-grade applications requiring a low-profile, small outline package with source current flow direction.
IRS2183STRPBF
IRS2183STRPBF by Infineon Technologies is a peripheral driver with a max supply voltage of 20V. It is used in automotive applications and offers built-in protections against transients and under voltage. Its turn-on time is 0.27us and it has a nominal output peak current limit of 1.9A.
LMD18200T
National Semiconductor
HB BASED PERIPHERAL DRIVER WITH PWM; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 11; Package Code: TO-220; Package Shape: RECTANGULAR;
L293DD013TR
L293DD013TR by STMicroelectronics is a 20-terminal peripheral driver with a max supply voltage of 36V. It features built-in thermal protection and offers a nominal output peak current limit of 1.2A. Ideal for applications requiring source and sink output current flow direction, such as buffer or inverter-based interface ICs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
VN7003ALHTR
STMicroelectronics' VN7003ALHTR is a peripheral driver with 8 terminals, AEC-Q100 screening level, and built-in protections for transient, over voltage, thermal, and under voltage. It operates at supply voltages ranging from 4V to 28V and has a turn-on time of 120us. Ideal for applications requiring buffer or inverter based peripheral drivers in automotive electronics.
VN7004CHTR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
VN7003AHTR
VN7003ALH
VN7050ASTR
VN7010AJTR-E
STMicroelectronics' VN7010AJTR-E is a peripheral driver with 16 terminals, AEC-Q100 screening, and built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates b/w 4V to 28V with turn-on/off times of 120/100 us. Ideal for buffer or inverter-based applications in automotive electronics due to its compact size and sink output flow direction.
VN7050AJTR
VN7040ASTR-E
STMicroelectronics' VN7040ASTR-E is a peripheral driver with 8 terminals, offering built-in protections for transient, over current, and over voltage. It operates at a supply voltage range of 4V to 28V and has a turn-on time of 120 us. Ideal for applications requiring sink output current flow direction in compact designs.
VN7010AJTR
VN7010AJTR by STMicroelectronics is a 16-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -40 to 125 °C with a supply voltage range of 4-28 V, making it suitable for automotive applications requiring fast turn-on/off times and sink output current flow.
VN7050ASTR-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER;
VN7040ASTR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
VN7040AJTR-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: HLSSOP; Package Shape: RECTANGULAR; Terminal Pitch: .5 mm;
VN7050AJTR-E
VN7004CH
VN7040AJTR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: HLSSOP; Package Shape: RECTANGULAR; Maximum Seated Height: 1.7 mm;
VN7007AHTR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Shape: RECTANGULAR; Terminal Position: SINGLE; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
VN7016AJTR
VN7016AJTR by STMicroelectronics is a peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates b/w -40 to 125 °C with a supply voltage range of 4-28 V. This automotive-grade IC has a turn-on time of 120 us and turn-off time of 100 us, making it ideal for buffer or inverter based applications.
VN7016AJTR-E
VN7020AJTR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: HLSSOP; Package Shape: RECTANGULAR; Built-in Protections: TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved